Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: sibis=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 34D05C4338A
From:   Sibi Sankar <sibis@codeaurora.org>
To:     sboyd@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org,
        mka@chromium.org
Cc:     viresh.kumar@linaro.org, agross@kernel.org, rjw@rjwysocki.net,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        dianders@chromium.org, tdas@codeaurora.org,
        Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/4] cpufreq: qcom: Re-arrange register offsets to support per core L3 DCVS
Date:   Thu, 29 Jul 2021 23:34:43 +0530
Message-Id: <1627581885-32165-3-git-send-email-sibis@codeaurora.org>
In-Reply-To: <1627581885-32165-1-git-send-email-sibis@codeaurora.org>
References: <1627581885-32165-1-git-send-email-sibis@codeaurora.org>
Precedence: bulk

Qualcomm SoCs (starting with SM8350) support per core voting for L3 cache
frequency. So, re-arrange the cpufreq register offsets to allow access for
the L3 interconnect to implement per core control. Also prevent binding
breakage caused by register offset shuffling by using the SM8250/SM8350
EPSS compatible.

Fixes: 7dbd121a2c58 ("arm64: dts: qcom: sc7280: Add cpufreq hw node")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f86859bf76f1..74ef3b38343b 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -28,6 +28,7 @@ struct qcom_cpufreq_soc_data {
 	u32 reg_volt_lut;
 	u32 reg_perf_state;
 	u8 lut_row_size;
+	bool skip_enable;
 };
 
 struct qcom_cpufreq_data {
@@ -257,19 +258,31 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 	.reg_volt_lut = 0x114,
 	.reg_perf_state = 0x920,
 	.lut_row_size = 32,
+	.skip_enable = false,
 };
 
 static const struct qcom_cpufreq_soc_data epss_soc_data = {
+	.reg_freq_lut = 0x0,
+	.reg_volt_lut = 0x100,
+	.reg_perf_state = 0x220,
+	.lut_row_size = 4,
+	.skip_enable = true,
+};
+
+static const struct qcom_cpufreq_soc_data epss_sm8250_soc_data = {
 	.reg_enable = 0x0,
 	.reg_freq_lut = 0x100,
 	.reg_volt_lut = 0x200,
 	.reg_perf_state = 0x320,
 	.lut_row_size = 4,
+	.skip_enable = false,
 };
 
 static const struct of_device_id qcom_cpufreq_hw_match[] = {
 	{ .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
 	{ .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data },
+	{ .compatible = "qcom,sm8250-cpufreq-epss", .data = &epss_sm8250_soc_data },
+	{ .compatible = "qcom,sm8350-cpufreq-epss", .data = &epss_sm8250_soc_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
@@ -334,10 +347,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	data->res = res;
 
 	/* HW should be in enabled state to proceed */
-	if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
-		dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
-		ret = -ENODEV;
-		goto error;
+	if (!data->soc_data->skip_enable) {
+		if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
+			dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
+			ret = -ENODEV;
+			goto error;
+		}
 	}
 
 	qcom_get_related_cpus(index, policy->cpus);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project