DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
        s=beta; d=gmail.com;
        h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition;
        b=AymZxWAtZpFO11SiOnjdnVNB7+E2dlLaeatI3pW0jU7WXiv++sPpSelSXHQ1qcZrEKsFDS9v8VKk3TMPUna15ZFuH/4ThZJHn8GbpbDWERQfm6TnGdh7R4bQKRpMIFRYHunMTLRLZKFJDTtyHwVxJZyHcV+8sj+D6Ns4MVsgK+4=
Message-ID: <9b33a9230611252149m4da2634akbd355f026759ac70@mail.gmail.com>
Date: Sun, 26 Nov 2006 11:19:04 +0530
From: "sudhnesh adapawar" <sudhnesh@gmail.com>
To: lia64-sim@napali.hpl.hp.com, linux-ia64@vger.kernel.org,
       linux-kernel@vger.kernel.org, kernelnewbies@nl.linux.org
Subject: How to boot 2.6 kernel using hp ski simulator ???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1597
Lines: 32

Hey all !
          I wanted to boot 2.6 kernel configured for ia64 architecture
on ia32 archi using hp ski simulator ! But I failed to do so ! I
followed the following steps:
1) I used 'make ARCH=ia64 menuconfig' to configure and followed the
steps to get kernel image of version 2.6 ! I also selected the generic
type as Ski-simulator and also selected the HP-ski drivers something
simscsi,etc.etc.
2)  After this I gave the following command for the ski installed in
my OS kernel version 2.6 :
  $ ski bootloader vmlinux simscsi=/var/ski-disks/sd
3) Then gave run to start the process.The screen with the output as
"loading vmlinux" was displayed and the process halted....no working
further !
Querries:
 1) I am not getting what is happenning for 2.6 configured with ia64....???
......But I also downloaded the bootloader and vmlinux for 2.4 from Hp
ski simulator home site and tried with the above 2 steps and the 2.4
kernel was booted successfully....I dont know whether this kernel
image is configured for ia64 but whatever it worked !
2) Does ski supports for 2.6 kernel configured with ia64 archi as done
in above  step    no : 2) ??
3) How can we use sda i.e simulated filesystem....like can we mount it
?? Or whenever the kernel is booted using ski command the filesystem
it uses is sda ???
        Thank You....
       Please kindly Reply !
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/