Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757484AbWK0I6U (ORCPT ); Mon, 27 Nov 2006 03:58:20 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757488AbWK0I6U (ORCPT ); Mon, 27 Nov 2006 03:58:20 -0500 Received: from py-out-1112.google.com ([64.233.166.180]:44356 "EHLO py-out-1112.google.com") by vger.kernel.org with ESMTP id S1757484AbWK0I6T (ORCPT ); Mon, 27 Nov 2006 03:58:19 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type; b=APY53IIS3O3OGYqMJWBtDZvCWDgYhCiuZu6wjq+W6+eJb71RaogcFdl5Tau910WJD+r5SgsW1cX9XO6nCFCjmcPsM0ekqKB72W60ujPchxMjtd8L24BY6DZStqEk3tvfT9bw5JFpoe8U+uTTCM93m0vqXPCl8g2iQjq9lat/luE= Message-ID: <456AA89C.909@gmail.com> Date: Mon, 27 Nov 2006 01:58:04 -0700 From: "Berck E. Nash" User-Agent: Icedove 1.5.0.8 (X11/20061124) MIME-Version: 1.0 To: Tejun Heo CC: "linux-kernel@vger.kernel.org" Subject: Re: 2.6.18 - AHCI detection pauses excessively References: <4557B7D2.2050004@gmail.com> <455B0BD7.20108@gmail.com> <455B5ADF.2040503@gmail.com> <20061127033550.GB11250@htj.dyndns.org> In-Reply-To: <20061127033550.GB11250@htj.dyndns.org> Content-Type: multipart/mixed; boundary="------------090208070805070006070002" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 43902 Lines: 817 This is a multi-part message in MIME format. --------------090208070805070006070002 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Tejun Heo wrote: > Yeah, I did and forgot about this thread too. Sorry. This is on the > top of my to-do list now. I'm attaching the patch. TIA. That didn't fix the problem, but did change the messages. I've attached the entire log, including the weird errors on power-off from the same device that gives problems on boot, which I suspect are related. Berck --------------090208070805070006070002 Content-Type: text/plain; name="ahcilog" Content-Transfer-Encoding: 8bit Content-Disposition: inline; filename="ahcilog" [ 0.000000] Linux version 2.6.19-rc6-mm1 (root@luna) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #3 SMP PREEMPT Sun Nov 26 21:25:59 MST 2006 [ 0.000000] Command line: root=/dev/sdc1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable) [ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262016 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000) [ 0.000000] PERCPU: Allocating 32512 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257375 [ 0.000000] Kernel command line: root=/dev/sdc1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 57.369381] Console: colour VGA+ 80x25 [ 57.632610] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 57.639997] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 57.646956] Checking aperture... [ 57.657752] Memory: 1027700k/1048064k available (2281k kernel code, 19860k reserved, 999k data, 196k init) [ 57.726521] Calibrating delay using timer specific routine.. 5800.15 BogoMIPS (lpj=2900075) [ 57.734992] Mount-cache hash table entries: 256 [ 57.739636] CPU: L1 I cache: 32K, L1 D cache: 32K [ 57.744433] CPU: L2 cache: 2048K [ 57.747699] using mwait in idle threads. [ 57.751657] CPU: Physical Processor ID: 0 [ 57.755701] CPU: Processor Core ID: 0 [ 57.759400] CPU0: Thermal monitoring enabled (TM2) [ 57.764238] Freeing SMP alternatives: 24k freed [ 57.768811] ACPI: Core revision 20060707 [ 57.797724] Using local APIC timer interrupts. [ 57.836680] result 25877185 [ 57.839512] Detected 25.877 MHz APIC timer. [ 57.844463] Booting processor 1/2 APIC 0x1 [ 57.858937] Initializing CPU#1 [ 57.919341] Calibrating delay using timer specific routine.. 5796.44 BogoMIPS (lpj=2898222) [ 57.919345] CPU: L1 I cache: 32K, L1 D cache: 32K [ 57.919346] CPU: L2 cache: 2048K [ 57.919348] CPU: Physical Processor ID: 0 [ 57.919348] CPU: Processor Core ID: 1 [ 57.919352] CPU1: Thermal monitoring enabled (TM2) [ 57.919543] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 57.920346] Brought up 2 CPUs [ 57.962055] testing NMI watchdog ... OK. [ 57.996481] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. [ 58.003041] time.c: Detected 2898.247 MHz processor. [ 58.095698] migration_cost=22 [ 58.099005] NET: Registered protocol family 16 [ 58.103489] wait_for_probes: waiting for 0 threads [ 58.108353] wait_for_probes: waiting for 0 threads [ 58.113184] ACPI: bus type pci registered [ 58.117236] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved [ 58.123713] PCI: Not using MMCONFIG. [ 58.127328] PCI: Using configuration type 1 [ 58.131544] wait_for_probes: waiting for 0 threads [ 58.144443] ACPI: Interpreter enabled [ 58.148145] ACPI: Using IOAPIC for interrupt routing [ 58.153867] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 58.159174] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 58.165654] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 58.171805] PCI: Transparent bridge - 0000:00:1e.0 [ 58.183676] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 58.191454] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 58.199230] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 58.207003] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 58.214779] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 58.222892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 58.230668] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 58.238444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 58.246113] Linux Plug and Play Support v0.97 (c) Adam Belay [ 58.251804] pnp: PnP ACPI init [ 58.257367] pnp: PnP ACPI: found 15 devices [ 58.261613] intel_rng: FWH not detected [ 58.265571] SCSI subsystem initialized [ 58.269400] PCI: Using ACPI for IRQ routing [ 58.273619] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 58.281970] wait_for_probes: waiting for 0 threads [ 58.286792] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 58.291874] hpet0: 3 64-bit timers, 14318180 Hz [ 58.297442] PCI-GART: No AMD northbridge found. [ 58.302523] pnp: 00:07: ioport range 0x290-0x297 has been reserved [ 58.308910] PCI: Bridge: 0000:00:01.0 [ 58.312610] IO window: disabled. [ 58.316047] MEM window: faa00000-feafffff [ 58.320263] PREFETCH window: cff00000-efefffff [ 58.324915] PCI: Bridge: 0000:00:1c.0 [ 58.328610] IO window: disabled. [ 58.332050] MEM window: disabled. [ 58.335573] PREFETCH window: cfe00000-cfefffff [ 58.340226] PCI: Bridge: 0000:00:1c.3 [ 58.343919] IO window: c000-cfff [ 58.347359] MEM window: fa900000-fa9fffff [ 58.351575] PREFETCH window: disabled. [ 58.355533] PCI: Bridge: 0000:00:1e.0 [ 58.359229] IO window: b000-bfff [ 58.362668] MEM window: fa700000-fa8fffff [ 58.366885] PREFETCH window: 50000000-500fffff [ 58.371541] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 58.379035] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 58.386523] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 58.394027] NET: Registered protocol family 2 [ 58.410079] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 58.417339] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 58.425423] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 58.432657] TCP: Hash tables configured (established 131072 bind 65536) [ 58.439300] TCP reno registered [ 58.446108] wait_for_probes: waiting for 0 threads [ 58.451398] audit: initializing netlink socket (disabled) [ 58.456838] audit(1164581690.592:1): initialized [ 58.466875] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 58.474192] io scheduler noop registered [ 58.478542] io scheduler anticipatory registered (default) [ 58.484336] assign_interrupt_mode Found MSI capability [ 58.489590] assign_interrupt_mode Found MSI capability [ 58.494852] assign_interrupt_mode Found MSI capability [ 58.500163] input: Power Button (FF) as /class/input/input0 [ 58.505766] ACPI: Power Button (FF) [PWRF] [ 58.509935] input: Power Button (CM) as /class/input/input1 [ 58.515541] ACPI: Power Button (CM) [PWRB] [ 58.519974] ACPI: Processor [CPU1] (supports 8 throttling states) [ 58.526417] ACPI: Processor [CPU2] (supports 8 throttling states) [ 58.532636] ACPI: Getting cpuindex for acpiid 0x3 [ 58.537377] ACPI: Getting cpuindex for acpiid 0x4 [ 58.543441] Real Time Clock Driver v1.12ac [ 58.547651] Linux agpgart interface v0.101 (c) Dave Jones [ 58.553087] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 58.561039] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.567369] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.573106] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 58.579491] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 58.587557] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 58.592994] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 58.600476] ICH7: chipset revision 1 [ 58.604083] ICH7: not 100% native mode: will probe irqs later [ 58.609868] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [ 58.617226] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio<7>Losing some ticks... checking if CPU frequency changed. [ 58.629616] [ 59.303006] hda: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive [ 60.022548] hdb: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive [ 60.082411] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 60.605720] SiI680: IDE controller at PCI slot 0000:01:00.0 [ 60.611332] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 60.618815] SiI680: chipset revision 2 [ 60.622608] SiI680: BASE CLOCK == 133 [ 60.626351] SiI680: 100% native mode on irq 21 [ 60.630835] ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio [ 60.636968] ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio [ 60.908838] hde: SAMSUNG WN316025A (1.6 GB), ATA DISK drive [ 61.525676] ide2 at 0xffffc20000006c80-0xffffc20000006c87,0xffffc20000006c8a on irq 21 [ 61.797585] hdg: MAXTOR 6L040J2, ATA DISK drive [ 62.413451] ide3 at 0xffffc20000006cc0-0xffffc20000006cc7,0xffffc20000006cca on irq 21 [ 62.421565] hde: max request size: 64KiB [ 62.425521] hde: 3145968 sectors (1610 MB) w/109KiB Cache, CHS=3121/16/63, DMA [ 62.432984] hde: hde1 [ 62.448439] hdg: max request size: 64KiB [ 62.453350] hdg: 78198750 sectors (40037 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) [ 62.461826] hdg: cache flushes supported [ 62.465792] hdg: hdg1 [ 62.484633] hda: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 62.491607] Uniform CD-ROM driver Revision: 3.20 [ 62.535733] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 62.556615] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 62.564736] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 62.572472] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 62.578688] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 62.587929] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 62.592943] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 62.598095] mice: PS/2 mouse device common for all mice [ 62.603362] EDAC MC: Ver: 2.0.1 Nov 25 2006 [ 62.607686] TCP cubic registered [ 62.610950] Initializing XFRM netlink socket [ 62.615263] NET: Registered protocol family 1 [ 62.619657] NET: Registered protocol family 17 [ 62.624147] NET: Registered protocol family 15 [ 62.628628] wait_for_probes: waiting for 3 threads [ 62.636844] input: AT Translated Set 2 keyboard as /class/input/input2 [ 62.773700] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 62.773701] [ 62.773702] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 62.773702] [ 63.054114] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2 [ 63.062248] scsi0:A:1:0: Tagged Queuing enabled. Depth 8 [ 63.067731] target0:0:1: Beginning Domain Validation [ 63.079230] target0:0:1: wide asynchronous [ 63.088137] target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15) [ 63.099356] target0:0:1: Domain Validation skipping write tests [ 63.105399] target0:0:1: Ending Domain Validation [ 63.113209] scsi 0:0:2:0: Direct-Access SGI SEAGATE ST39102L 2702 PQ: 0 ANSI: 2 [ 63.121334] scsi0:A:2:0: Tagged Queuing enabled. Depth 8 [ 63.126818] target0:0:2: Beginning Domain Validation [ 63.137168] target0:0:2: wide asynchronous [ 63.145241] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15) [ 63.155644] target0:0:2: Domain Validation skipping write tests [ 63.161682] target0:0:2: Ending Domain Validation [ 63.577105] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 63.585232] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 63.592092] ata1: SATA max UDMA/133 cmd 0xFFFFC2000000E900 ctl 0x0 bmdma 0x0 irq 316 [ 63.599913] ata2: SATA max UDMA/133 cmd 0xFFFFC2000000E980 ctl 0x0 bmdma 0x0 irq 316 [ 63.607731] ata3: SATA max UDMA/133 cmd 0xFFFFC2000000EA00 ctl 0x0 bmdma 0x0 irq 316 [ 63.615549] ata4: SATA max UDMA/133 cmd 0xFFFFC2000000EA80 ctl 0x0 bmdma 0x0 irq 316 [ 63.623332] scsi1 : ahci [ 63.927590] SATA PHY: stable DET=3 [ 64.031995] SATA PHY: stable DET=3 [ 64.136570] SATA PHY: stable DET=3 [ 64.241067] SATA PHY: stable DET=3 [ 64.344525] SATA PHY: stable DET=3 [ 64.449101] SATA PHY: stable DET=3 [ 64.553506] SATA PHY: stable DET=3 [ 64.658081] SATA PHY: stable DET=3 [ 64.762552] SATA PHY: stable DET=3 [ 64.866036] SATA PHY: stable DET=3 [ 64.970612] SATA PHY: stable DET=3 [ 65.075017] SATA PHY: stable DET=3 [ 65.179592] SATA PHY: stable DET=3 [ 65.284037] SATA PHY: stable DET=3 [ 65.387534] SATA PHY: stable DET=3 [ 65.492109] SATA PHY: stable DET=3 [ 65.596515] SATA PHY: stable DET=3 [ 65.701089] SATA PHY: stable DET=3 [ 65.805534] SATA PHY: stable DET=3 [ 65.909045] SATA PHY: stable DET=3 [ 65.912479] SATA PHY: debounced [ 66.070326] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 66.083463] ata1.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48 [ 66.089681] ata1.00: ata1: dev 0 multi count 16 [ 66.102173] ata1.00: configured for UDMA/133 [ 66.106487] scsi2 : ahci [ 66.240954] SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB) [ 66.249392] sda: Write Protect is off [ 66.254682] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA [ 66.263935] SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB) [ 66.272374] sda: Write Protect is off [ 66.277646] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA [ 66.286123] sda: sda1 sda2 [ 66.295437] sd 0:0:1:0: Attached scsi disk sda [ 66.299945] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 66.306160] SCSI device sdb: 17781520 512-byte hdwr sectors (9104 MB) [ 66.316003] sdb: Write Protect is off [ 66.323489] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA [ 66.332780] SCSI device sdb: 17781520 512-byte hdwr sectors (9104 MB) [ 66.342624] sdb: Write Protect is off [ 66.350085] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA [ 66.358564] sdb: sdb1 [ 66.367085] sd 0:0:2:0: Attached scsi disk sdb [ 66.371597] sd 0:0:2:0: Attached scsi generic sg1 type 0 [ 66.413576] SATA PHY: stable DET=3 [ 66.518137] SATA PHY: stable DET=3 [ 66.622543] SATA PHY: stable DET=3 [ 66.727118] SATA PHY: stable DET=3 [ 66.831523] SATA PHY: stable DET=3 [ 66.936098] SATA PHY: stable DET=3 [ 67.040660] SATA PHY: stable DET=3 [ 67.145065] SATA PHY: stable DET=3 [ 67.249640] SATA PHY: stable DET=3 [ 67.354046] SATA PHY: stable DET=3 [ 67.458621] SATA PHY: stable DET=3 [ 67.563183] SATA PHY: stable DET=3 [ 67.667589] SATA PHY: stable DET=3 [ 67.772164] SATA PHY: stable DET=3 [ 67.876570] SATA PHY: stable DET=3 [ 67.981144] SATA PHY: stable DET=3 [ 68.085707] SATA PHY: stable DET=3 [ 68.190099] SATA PHY: stable DET=3 [ 68.294674] SATA PHY: stable DET=3 [ 68.404075] SATA PHY: stable DET=3 [ 68.407512] SATA PHY: debounced [ 68.565486] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 98.544548] ata2.00: qc timeout (cmd 0xec) [ 98.548679] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 99.358514] SATA PHY: stable DET=3 [ 99.463089] SATA PHY: stable DET=3 [ 99.567495] SATA PHY: stable DET=3 [ 99.672070] SATA PHY: stable DET=3 [ 99.776515] SATA PHY: stable DET=3 [ 99.880026] SATA PHY: stable DET=3 [ 99.984601] SATA PHY: stable DET=3 [ 100.089006] SATA PHY: stable DET=3 [ 100.193581] SATA PHY: stable DET=3 [ 100.298013] SATA PHY: stable DET=3 [ 100.401537] SATA PHY: stable DET=3 [ 100.506112] SATA PHY: stable DET=3 [ 100.610517] SATA PHY: stable DET=3 [ 100.715092] SATA PHY: stable DET=3 [ 100.819511] SATA PHY: stable DET=3 [ 100.924060] SATA PHY: stable DET=3 [ 101.028635] SATA PHY: stable DET=3 [ 101.133040] SATA PHY: stable DET=3 [ 101.237615] SATA PHY: stable DET=3 [ 101.342034] SATA PHY: stable DET=3 [ 101.345474] SATA PHY: debounced [ 108.385331] ata2: port is slow to respond, please be patient (Status 0x80) [ 131.326177] ata2: port failed to respond (30 secs, Status 0x80) [ 131.332131] ata2: COMRESET failed (device not ready) [ 131.337127] ata2: hardreset failed, retrying in 5 secs [ 136.642653] SATA PHY: stable DET=3 [ 136.747228] SATA PHY: stable DET=3 [ 136.851699] SATA PHY: stable DET=3 [ 136.955170] SATA PHY: stable DET=3 [ 137.059746] SATA PHY: stable DET=3 [ 137.164151] SATA PHY: stable DET=3 [ 137.268726] SATA PHY: stable DET=3 [ 137.373184] SATA PHY: stable DET=3 [ 137.476682] SATA PHY: stable DET=3 [ 137.581257] SATA PHY: stable DET=3 [ 137.685662] SATA PHY: stable DET=3 [ 137.790237] SATA PHY: stable DET=3 [ 137.894682] SATA PHY: stable DET=3 [ 137.998193] SATA PHY: stable DET=3 [ 138.102768] SATA PHY: stable DET=3 [ 138.207173] SATA PHY: stable DET=3 [ 138.311748] SATA PHY: stable DET=3 [ 138.416180] SATA PHY: stable DET=3 [ 138.519704] SATA PHY: stable DET=3 [ 138.624279] SATA PHY: stable DET=3 [ 138.627716] SATA PHY: debounced [ 138.630908] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 138.641746] ata2.00: ATA-6, max UDMA/133, 640 sectors: LBA [ 138.647349] ata2.00: ata2: dev 0 multi count 1 [ 138.656446] ata2.00: configured for UDMA/133 [ 138.660753] scsi3 : ahci [ 138.964628] SATA PHY: stable DET=3 [ 139.069190] SATA PHY: stable DET=3 [ 139.173752] SATA PHY: stable DET=3 [ 139.278157] SATA PHY: stable DET=3 [ 139.382733] SATA PHY: stable DET=3 [ 139.487138] SATA PHY: stable DET=3 [ 139.591713] SATA PHY: stable DET=3 [ 139.696275] SATA PHY: stable DET=3 [ 139.800681] SATA PHY: stable DET=3 [ 139.905256] SATA PHY: stable DET=3 [ 140.009661] SATA PHY: stable DET=3 [ 140.114237] SATA PHY: stable DET=3 [ 140.218799] SATA PHY: stable DET=3 [ 140.323204] SATA PHY: stable DET=3 [ 140.427779] SATA PHY: stable DET=3 [ 140.532185] SATA PHY: stable DET=3 [ 140.636760] SATA PHY: stable DET=3 [ 140.741322] SATA PHY: stable DET=3 [ 140.845727] SATA PHY: stable DET=3 [ 140.950302] SATA PHY: stable DET=3 [ 140.953737] SATA PHY: debounced [ 141.111543] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 141.123065] ata3.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32) [ 141.130844] ata3.00: ata3: dev 0 multi count 16 [ 141.140769] ata3.00: configured for UDMA/133 [ 141.145078] scsi4 : ahci [ 141.449052] SATA PHY: stable DET=0 [ 141.553626] SATA PHY: stable DET=0 [ 141.658032] SATA PHY: stable DET=0 [ 141.762607] SATA PHY: stable DET=0 [ 141.867052] SATA PHY: stable DET=0 [ 141.970563] SATA PHY: stable DET=0 [ 142.075138] SATA PHY: stable DET=0 [ 142.179543] SATA PHY: stable DET=0 [ 142.284118] SATA PHY: stable DET=0 [ 142.388550] SATA PHY: stable DET=0 [ 142.492074] SATA PHY: stable DET=0 [ 142.596649] SATA PHY: stable DET=0 [ 142.701048] SATA PHY: stable DET=0 [ 142.805617] SATA PHY: stable DET=0 [ 142.910022] SATA PHY: stable DET=0 [ 143.014584] SATA PHY: stable DET=0 [ 143.119146] SATA PHY: stable DET=0 [ 143.223552] SATA PHY: stable DET=0 [ 143.328127] SATA PHY: stable DET=0 [ 143.432532] SATA PHY: stable DET=0 [ 143.435965] SATA PHY: debounced [ 143.439146] ata4: SATA link down (SStatus 0 SControl 300) [ 143.444617] scsi 1:0:0:0: Direct-Access ATA WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5 [ 143.452786] SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB) [ 143.459353] sdc: Write Protect is off [ 143.463061] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.472081] SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB) [ 143.478649] sdc: Write Protect is off [ 143.482352] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.491347] sdc: sdc1 sdc2 [ 143.502458] sd 1:0:0:0: Attached scsi disk sdc [ 143.506968] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 143.512352] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5 [ 143.520525] SCSI device sdd: 640 512-byte hdwr sectors (0 MB) [ 143.526313] sdd: Write Protect is off [ 143.530021] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 143.539123] SCSI device sdd: 640 512-byte hdwr sectors (0 MB) [ 143.544915] sdd: Write Protect is off [ 143.548618] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 143.557700] sdd: unknown partition table [ 143.561965] sd 2:0:0:0: Attached scsi disk sdd [ 143.566471] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 143.571856] scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 [ 143.580033] SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) [ 143.586770] sde: Write Protect is off [ 143.590476] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.599487] SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) [ 143.606226] sde: Write Protect is off [ 143.609938] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 143.618935] sde: sde1 sde2 [ 143.628705] sd 3:0:0:0: Attached scsi disk sde [ 143.633214] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 143.638621] wait_for_probes: waiting for 0 threads [ 143.644027] reiser4: sdc1: found disk format 4.0.0. [ 144.852704] VFS: Mounted root (reiser4 filesystem) readonly. [ 144.858424] Freeing unused kernel memory: 196k freed INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 147.094500] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 147.102175] sky2 v1.10 addr 0xfa9fc000 irq 19 Yukon-EC (0xb6) rev 2 [ 147.108722] sky2 eth0: addr 00:18:f3:3d:1b:06 [ 147.113659] Floppy drive(s): fd0 is 1.44M [ 147.132226] FDC 0 is a post-1991 82077 [ 147.140641] usbcore: registered new interface driver usbfs [ 147.146253] usbcore: registr4en1ew interface driver hub [ 147.151727] usbcore: registered new device driver usb [ 147.176300] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23 [ 147.194214] USB Universal Host Controller Interface driver v3.0 [ 147.200314] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 147.205440] ACPI: PCI Interrupt 000070:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 147.205450] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 147.205525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 1 [ 147.2054P] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 147.206118] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 147.206126] uhci_hcd 0000:00:1d.2: UHCI Hosodnraoeir [ 147.206158] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 147.206159] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 147.206161] usb usb1: Product: UHCI Host ContrlUer [ 147.206162] usb usb1: Manufacturer: Linux 2.6.19-rc6-mm1 uhci_hcd [ 147.206163] usb usb1: SerialNumber: 0000:00:1d.1 [ 147.206204] usb usb1: configuration #1 chosen fro 21 choice [ 147.206218] hub 1-0:1.0: USB hub found [ 147.206221] hub 1-0:1.0: 2 ports detected [ 147.206233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2 [ 147.206261] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 147.206292] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 147.206299] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 147.206320] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 147.206322] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 147.206323] usb usb2: Product: UHCI Host Controller [ 147.206324] usb usb2: Manufacturer: Linux 2.6.19-rc6-mm1 uhci_hcd [ 147.206326] usb usb2: SerialNumber: 0000:00:1d.2 [ 147.206354] usb usb2: configuration #1 chosen from 1 choice [ 147.206367] hub 2-0:1.0: USB hub found [ 147.206370] hub 2-0:1.0: 2 ports detected [ 147.206382] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 3 [ 147.206408] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00 [ 147.206446] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 147.206447] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 147.206448] usb usb3: Product: UHCI Host Controller [ 147.206450] usb usb3: Manufacturer: Linux 2.6.19-rc6-mm1 uhci_hcd [ 147.206451] usb usb3: SerialNumber: 0000:00:1d.3 [ 147.206477] usb usb3: configuration #1 chosen from 1 choice [ 147.206489] hub 3-0:1.0: USB hub found [ 147.206492] hub 3-0:1.0: 2 ports detected [ 147.421598] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 147.427070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 147.434751] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 [ 147.440796] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 147.448538] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 147.455593] usb usb4: Product: UHCI Host Controller [ 147.460591] usb usb4: Manufacturer: Linux 2.6.19-rc6-mm1 uhci_hcd [ 147.469255] usb usb4: SerialNumber: 0000:00:1d.0 [ 147.474562] usb usb4: configuration #1 chosen from 1 choice [ 147.480258] hub 4-0:1.0: USB hub found [ 147.484115] hub 4-0:1.0: 2 ports detected [ 147.517639] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 147.525681] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 147.531082] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 147.538724] ehci_hcd 0000:00:1d.7: debug port 1 [ 147.543386] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00 [ 147.553056] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 147.560798] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 147.567356] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 147.574394] usb usb5: Product: EHCI Host Controller [ 147.579382] usb usb5: Manufacturer: Linux 2.6.19-rc6-mm1 ehci_hcd [ 147.585609] usb usb5: SerialNumber: 0000:00:1d.7 [ 147.590675] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 147.598091] usb usb5: configuration #1 chosen from 1 choice [ 147.598111] hub 5-0:1.0: USB hub found [ 147.598115] hub 5-0:1.0: 8 ports detected [ 147.664579] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... done. Setting parameters of disc: (none). Activating swap:swapon on /dev/sdc2 [ 148.501685] Adding 1959920k swap on /dev/sdc2. Priority:-1 extents:1 across:1959920k . Will now check root file system:fsck 1.40-WIP (14-Nov-2006) [/sbin/fsck.reiser4 (1) -- /] fsck.reiser4 -a /dev/sdc1 fsck.reiser4 /dev/sdc1 . Setting the system clock again.. [ 148.846087] usb 5-7: new high speed USB device using ehci_hcd and address 6 [ 148.971198] usb 5-7: new device found, idVendor=05e3, idProduct=0606 [ 148.977871] usb 5-7: new device strings: Mfr=0, Product=1, SerialNumber=0 [ 148.985141] usb 5-7: Product: USB2.0 Hub [ 148.989440] usb 5-7: configuration #1 chosen from 1 choice [ 148.995552] hub 5-7:1.0: USB hub found [ 148.999907] hub 5-7:1.0: 4 ports detected [ 149.179768] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 149.359046] usb 4-1: new device found, idVendor=045e, idProduct=001e [ 149.365905] usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 149.373212] usb 4-1: Product: Microsoft IntelliMouse? Explorer [ 149.379456] usb 4-1: Manufacturer: Microsoft [ 149.384122] usb 4-1: configuration #1 chosen from 1 choice System Clock set. Local time: Sun Nov 26 22:56:23 MST 2006. Cleaning up ifupdown.... Loading kernel module nvidia. [ 149.527299] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 149.664808] usbcore: registered new interface driver hiddev [ 149.691745] usb 4-2: new device found, idVendor=0d3d, idProduct=0001 [ 149.698254] usb 4-2: new device strings: Mfr=0, Product=2, SerialNumber=0 [ 149.705179] usb 4-2: Product: USBPS2 [ 149.708899] usb 4-2: configuration #1 chosen from 1 choice [ 149.870517] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 149.990442] usb 2-1: device descriptor read/64, error -71 [ 150.209320] usb 2-1: device descriptor read/64, error -71 [ 150.257283] nvidia: module license 'NVIDIA' taints kernel. [ 150.416927] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 150.515873] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 150.515890] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 150.530441] NVRM: This can occur when a driver such as rivafb, nvidiafb or [ 150.530442] NVRM: rivatv was loaded and obtained ownership of the NVIDIA [ 150.530443] NVRM: device(s). [ 150.536819] usb 2-1: device descriptor read/64, error -71 [ 150.552801] NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module [ 150.552802] NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb [ 150.552803] NVRM: support), then try loading the NVIDIA kernel module again. [ 150.574122] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9629 Wed Nov 1 19:27:33 PST 2006 Loading kernel module loop. FATAL: Module loop not found. Loading kernel module i2c-i801. Loading kernel module i2c-isa. Loading kernel module eeprom. Loading kernel module w83627ehf. Loading kernel module usb-storage. [ 150.655320] Initializing USB Mass Storage driver... [ 150.752226] usb 2-1: device descriptor read/64, error -71 [ 150.961220] usb 2-1: new full speed USB device using uhci_hcd and address 5 [ 151.376260] usb 2-1: device not accepting address 5, error -71 [ 151.484845] usb 2-1: new full speed USB device using uhci_hcd and address 6 [ 151.899912] usb 2-1: device not accepting address 6, error -71 [ 152.112034] usb 2-2: new full speed USB device using uhci_hcd and address 7 [ 152.419953] usb 5-7.3: new high speed USB device using ehci_hcd and address 7 [ 152.511368] usb 5-7.3: new device found, idVendor=0bda, idProduct=8187 [ 152.518346] usb 5-7.3: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 152.525398] usb 5-7.3: Product: RTL8187_Wireless [ 152.530085] usb 5-7.3: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 152.531240] input: Microsoft Microsoft IntelliMouse? Explorer as /class/input/input3 [ 152.531376] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-0000:00:1d.0-1 [ 152.553989] usb 5-7.3: SerialNumber: 0015AF05C9DE [ 152.558883] usb 5-7.3: configuration #1 chosen from 1 choice [ 152.564748] input: USBPS2 as /class/input/input4 [ 152.569559] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-2 [ 152.598228] input: USBPS2 as /class/input/input5 [ 152.603008] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-2 [ 152.609682] usbcore: registered new interface driver usbhid [ 152.612079] usbcore: registered new interface driver usb-storage [ 152.612081] USB Mass Storage support registered. [ 152.626231] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Loading kernel module snd-rtctimer. Loading kernel module uhci-hcd. Loading kernel module acpi-cpufreq. FATAL: Error inserting acpi_cpuf[ 152.674231] usbcore: registered new interface driver cdc_acm req (/lib/module[ 152.680227] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters s/2.6.19-rc6-mm1/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device Loading kernel module cdc-acm. Loading device-mapper support. Will now check all file systems. fsck 1.40-WIP (14-Nov-2006) Checking all file systems. Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable. Setting kernel variables...done. Will now mount local filesystems:[ 152.853692] ReiserFS: sde1: found reiserfs format "3.6" with standard journal [ 152.860994] ReiserFS: sde1: using ordered data mode [ 152.875751] ReiserFS: sde1: journal params: device sde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 152.890838] ReiserFS: sde1: checking transaction log (sde1) [ 152.968048] ReiserFS: sde1: Using r5 hash to sort names [ 153.035606] reiser4: sda1: found disk format 4.0.0. . Will now activate swapfile swap:done. Cleaning /tmp...done. Cleaning /var/run...done. Cleaning /var/lock...done. Setting up networking.... Configuring network interfaces...done. Starting portmap daemon.... [ 154.803119] sky2 eth0: enabling interface Setting sensors limits: done. Setting console screen modes and fonts. Setting up ALSA...done. Initializing random number generator...done. Recovering nvi editor sessions...none found. Setting up X server socket directory /tmp/.X11-unix.... Setting up ICE socket directory /tmp/.ICE-unix.... Recovering schroot sessions... done. INIT: Entering runlevel: 2 Starting system log daemon.... Starting kernel log daemon.... Loading ACPI modules: Starting Advanced Configuration and Power Interface daemon: acpid. Starting Common Unix Printing System: cupsd[ 157.299194] usb 2-2: new device found, idVendor=03f0, idProduct=0401 [ 157.305711] usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 157.312652] usb 2-2: Product: HP ScanJet 5200C [ 157.317694] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 157.325090] usb 2-2: Manufacturer: Hewlett-Packard [ 157.329976] usb 2-2: SerialNumber: SG91U161Z2HT [ 157.334680] usb 2-2: configuration #1 chosen from 1 choice . Starting system message bus: dbus. Starting Hardware abstraction layer: hald. Starting DirMngr: dirmngr. Starting mouse interface server: gpm. Starting internet superserver: inetd. Starting Postfix Mail Transport Agent: postfix. Starting Samba daemons: nmbd smbd. Starting sensor daemon: sensord. Starting OpenBSD Secure Shell server: sshd. Setting up X font server socket directory /tmp/.font-unix...done. Starting X font server: xfs. Starting NFS common utilities: statd. Starting NTP server: ntpd. Starting deferred execution scheduler: atd. Starting periodic command scheduler: crond. Starting K Display Manager: kdm. Running local boot scripts (/etc/rc.local). Debian GNU/Linux 4.0 luna ttyS0 luna login: INIT:Stopping K Display Manager: kdm. Stopping deferred execution scheduler: atd. Stopping periodic command scheduler: crond. Stopping Samba daemons: nmbd smbd. Stopping Advanced Configuration and Power Interface daemon: acpid. Stopping Common Unix Printing System: cupsd. Stopping Hardware abstraction layer: hald. Stopping system message bus: dbus. Stopping DirMngr: dirmngr. Stopping mouse interface server: gpm. Stopping internet superserver: inetd. Stopping Postfix Mail Transport Agent: postfix. Stopping sensor daemon: sensord. Stopping OpenBSD Secure Shell server: sshd. Stopping X font server: xfs. Stopping NTP server: ntpd. Saving the system clock.. Hardware Clock updated to Mon Nov 27 01:30:01 MST 2006. Shutting down ALSA...done. Stopping NFS common utilities: statd. Stopping kernel log daemon.... Stopping system log daemon.... Saving random seed...done. Asking non-system processes to terminate...done. Unmounting remote and non-toplevel virtual filesystems...done. Stopping portmap daemon.... Deconfiguring network interfaces...[ 9363.903564] sky2 eth0: disabling interface done. Cleaning up ifupdown.... Asking all remaining processes to terminate...done. Killing all remaining processes...done. Will now unmount temporary filesystems:/dev umounted . Will now deactivate swap:swapoff on /dev/sdc2 . Will now unmount local filesystems:/backup umounted /home umounted /tmp umounted /dev/sde1 umounted /dev/sda1 umounted /dev/hde1 umounted . Mounting root filesystem read-only...done. Will now halt. [ 9371.896444] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9371.903036] ata2.00: (irq_stat 0x40000001) [ 9371.907228] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9371.907229] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9371.931688] ata2.00: configured for UDMA/133 [ 9371.936073] ata2: EH complete [ 9371.939137] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9371.945702] ata2.00: (irq_stat 0x40000001) [ 9371.949899] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9371.949900] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9371.974319] ata2.00: configured for UDMA/133 [ 9371.978701] ata2: EH complete [ 9371.981763] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9371.988346] ata2.00: (irq_stat 0x40000001) [ 9371.992543] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9371.992544] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.016961] ata2.00: configured for UDMA/133 [ 9372.021345] ata2: EH complete [ 9372.024417] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.030990] ata2.00: (irq_stat 0x40000001) [ 9372.035190] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.035191] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.059604] ata2.00: configured for UDMA/133 [ 9372.063981] ata2: EH complete [ 9372.067053] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.073634] ata2.00: (irq_stat 0x40000001) [ 9372.077834] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.077835] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.102259] ata2.00: configured for UDMA/133 [ 9372.106633] ata2: EH complete [ 9372.109702] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.116280] ata2.00: (irq_stat 0x40000001) [ 9372.120471] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.120472] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.144866] ata2.00: configured for UDMA/133 [ 9372.149237] ata2: EH complete [ 9372.152310] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.158882] ata2.00: (irq_stat 0x40000001) [ 9372.163079] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.163080] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.187505] ata2.00: configured for UDMA/133 [ 9372.191891] ata2: EH complete [ 9372.194954] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.201528] ata2.00: (irq_stat 0x40000001) [ 9372.205725] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.205726] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.230150] ata2.00: configured for UDMA/133 [ 9372.234525] ata2: EH complete [ 9372.237590] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.244171] ata2.00: (irq_stat 0x40000001) [ 9372.248370] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.248371] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.272791] ata2.00: configured for UDMA/133 [ 9372.277161] ata2: EH complete [ 9372.280236] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.286818] ata2.00: (irq_stat 0x40000001) [ 9372.291015] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.291016] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.315408] ata2.00: configured for UDMA/133 [ 9372.319772] ata2: EH complete [ 9372.322838] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.329410] ata2.00: (irq_stat 0x40000001) [ 9372.333607] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.333608] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.358023] ata2.00: configured for UDMA/133 [ 9372.362390] ata2: EH complete [ 9372.365463] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 9372.372036] ata2.00: (irq_stat 0x40000001) [ 9372.376236] ata2.00: cmd 94/00:00:00:00:00/00:00:00:00:00/00 tag 0 data 0 in [ 9372.376237] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error) [ 9372.400648] ata2.00: configured for UDMA/133 [ 9372.405018] ata2: EH complete [ 9372.408077] SCSI device sdd: 640 512-byte hdwr sectors (0 MB) [ 9372.410277] Synchronizing SCSI cache for disk sde: [ 9372.418928] sdd: Write Protect is off [ 9372.422679] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9372.431950] SCSI device sdd: 640 512-byte hdwr sectors (0 MB) [ 9372.437839] sdd: Write Protect is off [ 9372.441609] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9372.450324] Synchronizing SCSI cache for disk sdc: [ 9372.450480] Synchronizing SCSI cache for disk sdb: [ 9372.450732] Synchronizing SCSI cache for disk sda: [ 9372.942537] Shutdown: hdg [ 9372.945441] Shutdown: hde [ 9372.948690] Power down. [ 9372.951278] acpi_power_off called --------------090208070805070006070002-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/