Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210726182850.14328-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <20210726182850.14328-3-prabhakar.mahadev-lad.rj@bp.renesas.com> <20210731181142.430c50f8@jic23-huawei>
In-Reply-To: <20210731181142.430c50f8@jic23-huawei>
From:   "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date:   Sat, 31 Jul 2021 19:31:52 +0100
Message-ID: <CA+V-a8vMdFrrcw3iqbSzd4oN_x6CijOwYo7eSFuf8LhfB6SFRg@mail.gmail.com>
Subject: Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
To:     Jonathan Cameron <jic23@kernel.org>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Rob Herring <robh+dt@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Magnus Damm <magnus.damm@gmail.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Alexandru Ardelean <aardelean@deviqon.com>,
        linux-iio <linux-iio@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>,
        Biju Das <biju.das.jz@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Jonathan,

Thank you for the review.

On Sat, Jul 31, 2021 at 6:09 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Mon, 26 Jul 2021 19:28:49 +0100
> Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> > Add ADC driver support for Renesas RZ/G2L A/D converter in SW
> > trigger mode.
> >
> > A/D Converter block is a successive approximation analog-to-digital
> > converter with a 12-bit accuracy and supports a maximum of 8 input
> > channels.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Hi Lad,
>
> A few additional comments inline,
>
> Thanks,
>
> Jonathan
>
> > ---
> >  MAINTAINERS                 |   8 +
> >  drivers/iio/adc/Kconfig     |  10 +
> >  drivers/iio/adc/Makefile    |   1 +
> >  drivers/iio/adc/rzg2l_adc.c | 595 ++++++++++++++++++++++++++++++++++++
> >  4 files changed, 614 insertions(+)
> >  create mode 100644 drivers/iio/adc/rzg2l_adc.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 6c8be735cc91..6a52f9f4604c 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -15839,6 +15839,14 @@ L:   linux-renesas-soc@vger.kernel.org
> >  S:   Maintained
> >  F:   drivers/phy/renesas/phy-rcar-gen3-usb*.c
> >
> > +RENESAS RZ/G2L A/D DRIVER
> > +M:   Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +L:   linux-iio@vger.kernel.org
> > +L:   linux-renesas-soc@vger.kernel.org
> > +S:   Supported
> > +F:   Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > +F:   drivers/iio/adc/rzg2l_adc.c
> > +
> >  RESET CONTROLLER FRAMEWORK
> >  M:   Philipp Zabel <p.zabel@pengutronix.de>
> >  S:   Maintained
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index db0c8fb60515..af168e1c9fdb 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -887,6 +887,16 @@ config ROCKCHIP_SARADC
> >         To compile this driver as a module, choose M here: the
> >         module will be called rockchip_saradc.
> >
> > +config RZG2L_ADC
> > +     tristate "Renesas RZ/G2L ADC driver"
> > +     depends on ARCH_R9A07G044 || COMPILE_TEST
> > +     help
> > +       Say yes here to build support for the ADC found in Renesas
> > +       RZ/G2L family.
> > +
> > +       To compile this driver as a module, choose M here: the
> > +       module will be called rzg2l_adc.
> > +
> >  config SC27XX_ADC
> >       tristate "Spreadtrum SC27xx series PMICs ADC"
> >       depends on MFD_SC27XX_PMIC || COMPILE_TEST
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index f70d877c555a..d68550f493e3 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -82,6 +82,7 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
> >  obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
> >  obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
> >  obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> > +obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
> >  obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
> >  obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
> >  obj-$(CONFIG_STX104) += stx104.o
> > diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
> > new file mode 100644
> > index 000000000000..d05a3208ff9d
> > --- /dev/null
> > +++ b/drivers/iio/adc/rzg2l_adc.c
> > @@ -0,0 +1,595 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * RZ/G2L A/D Converter driver
> > + *
> > + *  Copyright (c) 2021 Renesas Electronics Europe GmbH
> > + *
> > + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +
> > +#define DRIVER_NAME          "rzg2l-adc"
>
> As only used in one place, just put it inline there so we don't need
> to go find if we want to know the value - I'm lazy.
>
Its being used in two places
1: indio_dev->name = DRIVER_NAME #In probe call
2: .name = DRIVER_NAME # In platform_driver struct

Let me know if you want me to replace them inline and drop the above macro.

> > +
> > +#define RZG2L_ADM(n)                 ((n) * 0x4)
> > +#define RZG2L_ADM0_ADCE                      BIT(0)
> > +#define RZG2L_ADM0_ADBSY             BIT(1)
> > +#define RZG2L_ADM0_PWDWNB            BIT(2)
> > +#define RZG2L_ADM0_SRESB             BIT(15)
> > +#define RZG2L_ADM1_TRG                       BIT(0)
> > +#define RZG2L_ADM1_MS                        BIT(2)
> > +#define RZG2L_ADM1_BS                        BIT(4)
> > +#define RZG2L_ADM1_EGA_MASK          GENMASK(13, 12)
> > +#define RZG2L_ADM2_CHSEL_MASK                GENMASK(7, 0)
> > +#define RZG2L_ADM3_ADIL_MASK         GENMASK(31, 24)
> > +#define RZG2L_ADM3_ADCMP_MASK                GENMASK(23, 16)
> > +#define RZG2L_ADM3_ADCMP_E           FIELD_PREP(RZG2L_ADM3_ADCMP_MASK, 0xe)
> > +#define RZG2L_ADM3_ADSMP_MASK                GENMASK(15, 0)
> > +
> > +#define RZG2L_ADINT                  0x20
> > +#define RZG2L_ADINT_INTEN_MASK               GENMASK(7, 0)
> > +#define RZG2L_ADINT_CSEEN            BIT(16)
> > +#define RZG2L_ADINT_INTS             BIT(31)
> > +
> > +#define RZG2L_ADSTS                  0x24
> > +#define RZG2L_ADSTS_CSEST            BIT(16)
> > +#define RZG2L_ADSTS_INTST_MASK               GENMASK(7, 0)
> > +
> > +#define RZG2L_ADIVC                  0x28
> > +#define RZG2L_ADIVC_DIVADC_MASK              GENMASK(8, 0)
> > +#define RZG2L_ADIVC_DIVADC_4         FIELD_PREP(RZG2L_ADIVC_DIVADC_MASK, 0x4)
> > +
> > +#define RZG2L_ADFIL                  0x2c
> > +
> > +#define RZG2L_ADCR(n)                        (0x30 + ((n) * 0x4))
> > +#define RZG2L_ADCR_AD_MASK           GENMASK(11, 0)
> > +
> > +#define RZG2L_ADSMP_DEFUALT_SAMPLING 0x578
> > +
> > +#define RZG2L_ADC_MAX_CHANNELS               8
> > +#define RZG2L_ADC_CHN_MASK           0x7
> > +#define RZG2L_ADC_TIMEOUT            usecs_to_jiffies(1 * 4)
> > +
> > +struct rzg2l_adc_data {
> > +     const struct iio_chan_spec *channels;
> > +     u8 num_channels;
> > +};
> > +
> > +struct rzg2l_adc {
> > +     void __iomem *base;
> > +     struct clk *pclk;
> > +     struct clk *adclk;
> > +     struct reset_control *presetn;
> > +     struct reset_control *adrstn;
> > +     struct completion completion;
> > +     const struct rzg2l_adc_data *data;
> > +     u16 last_val[RZG2L_ADC_MAX_CHANNELS];
> > +};
> > +
> > +static const char * const rzg2l_adc_channel_name[] = {
> > +     "adc0",
> > +     "adc1",
> > +     "adc2",
> > +     "adc3",
> > +     "adc4",
> > +     "adc5",
> > +     "adc6",
> > +     "adc7",
> > +};
> > +
> > +static unsigned int rzg2l_adc_readl(struct rzg2l_adc *adc, u32 reg)
> > +{
> > +     return readl(adc->base + reg);
> > +}
> > +
> > +static void rzg2l_adc_writel(struct rzg2l_adc *adc, unsigned int reg, u32 val)
> > +{
> > +     writel(val, adc->base + reg);
> > +}
> > +
> > +static void rzg2l_adc_pwr(struct rzg2l_adc *adc, bool on)
> > +{
> > +     u32 reg;
> > +
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(0));
> > +     if (on)
> > +             reg |= RZG2L_ADM0_PWDWNB;
> > +     else
> > +             reg &= ~RZG2L_ADM0_PWDWNB;
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(0), reg);
> > +     udelay(2);
> > +}
> > +
> > +static void rzg2l_adc_start_stop(struct rzg2l_adc *adc, bool start)
> > +{
> > +     int timeout = 5;
> > +     u32 reg;
> > +
> > +     /* stop A/D conversion */
>
> This comment seems odd.  If it is stopping conversion, how is this function
> used to start conversion?  Perhaps some more details.
>
My bad its should be start/stop, said that already the function is
named rzg2l_adc_start_stop() so will drop this comment.

> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(0));
> > +     if (start)
> > +             reg |= RZG2L_ADM0_ADCE;
> > +     else
> > +             reg &= ~RZG2L_ADM0_ADCE;
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(0), reg);
> > +
> > +     if (start)
> > +             return;
> > +
> > +     do {
> > +             usleep_range(100, 200);
> > +             reg = rzg2l_adc_readl(adc, RZG2L_ADM(0));
> > +             timeout--;
> > +             if (!timeout) {
> > +                     pr_err("%s stopping ADC timed out\n", __func__);
> > +                     break;
> > +             }
> > +     } while (((reg & RZG2L_ADM0_ADBSY) || (reg & RZG2L_ADM0_ADCE)));
> > +}
> > +
> > +static void rzg2l_set_trigger(struct rzg2l_adc *adc)
> > +{
> > +     u32 reg;
> > +
> > +     /*
> > +      * Setup ADM1 for SW trigger
> > +      * EGA[13:12] - Set 00 to indicate hardware trigger is invalid
> > +      * BS[4] - Enable 1-buffer mode
> > +      * MS[1] - Enable Select mode
> > +      * TRG[0] - Enable software trigger mode
> > +      */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(1));
> > +     reg &= ~RZG2L_ADM1_EGA_MASK;
> > +     reg &= ~RZG2L_ADM1_BS;
> > +     reg &= ~RZG2L_ADM1_TRG;
> > +     reg |= RZG2L_ADM1_MS;
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(1), reg);
> > +}
> > +
> > +static int rzg2l_adc_conversion_setup(struct rzg2l_adc *adc, u8 ch)
> > +{
> > +     u32 reg;
> > +
> > +     if (rzg2l_adc_readl(adc, RZG2L_ADM(0)) & RZG2L_ADM0_ADBSY)
> > +             return -EBUSY;
> > +
> > +     rzg2l_set_trigger(adc);
> > +
> > +     /* Select analog input channel subjected to conversion. */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(2));
> > +     reg &= ~RZG2L_ADM2_CHSEL_MASK;
> > +     reg |= BIT(ch);
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(2), reg);
> > +
> > +     /*
> > +      * Setup ADINT
> > +      * INTS[31] - Select pulse signal
> > +      * CSEEN[16] - Enable channel select error interrupt
> > +      * INTEN[7:0] - Select channel interrupt
> > +      */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADINT);
> > +     reg &= ~RZG2L_ADINT_INTS;
> > +     reg &= ~RZG2L_ADINT_INTEN_MASK;
> > +     reg |= (RZG2L_ADINT_CSEEN | BIT(ch));
> > +     rzg2l_adc_writel(adc, RZG2L_ADINT, reg);
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_adc_set_power(struct iio_dev *indio_dev, bool on)
> > +{
> > +     struct device *dev = indio_dev->dev.parent;
> > +
> > +     if (on)
> > +             return pm_runtime_resume_and_get(dev);
> > +
> > +     return pm_runtime_put_sync(dev);
> > +}
> > +
> > +static int rzg2l_adc_conversion(struct iio_dev *indio_dev, struct rzg2l_adc *adc, u8 ch)
> > +{
> > +     int ret;
> > +
> > +     ret = rzg2l_adc_set_power(indio_dev, true);
> > +     if (ret)
> > +             return ret;
> > +
> > +     ret = rzg2l_adc_conversion_setup(adc, ch);
> > +     if (ret) {
> > +             rzg2l_adc_set_power(indio_dev, false);
> > +             return ret;
> > +     }
> > +
> > +     reinit_completion(&adc->completion);
> > +
> > +     rzg2l_adc_start_stop(adc, true);
> > +
> > +     if (!wait_for_completion_timeout(&adc->completion, RZG2L_ADC_TIMEOUT)) {
> > +             rzg2l_adc_writel(adc, RZG2L_ADINT,
> > +                              rzg2l_adc_readl(adc, RZG2L_ADINT) & ~RZG2L_ADINT_INTEN_MASK);
> > +             rzg2l_adc_start_stop(adc, false);
> > +             rzg2l_adc_set_power(indio_dev, false);
> > +             return -ETIMEDOUT;
> > +     }
> > +
> > +     return rzg2l_adc_set_power(indio_dev, false);
> > +}
> > +
> > +static int rzg2l_adc_read_raw(struct iio_dev *indio_dev,
> > +                           struct iio_chan_spec const *chan,
> > +                           int *val, int *val2, long mask)
> > +{
> > +     struct rzg2l_adc *adc = iio_priv(indio_dev);
> > +     int ret;
> > +     u8 ch;
> > +
> > +     switch (mask) {
> > +     case IIO_CHAN_INFO_RAW:
> > +             if (chan->type != IIO_VOLTAGE)
> > +                     return -EINVAL;
> > +
> > +             ret = iio_device_claim_direct_mode(indio_dev);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             ch = chan->channel & RZG2L_ADC_CHN_MASK;
> > +             ret = rzg2l_adc_conversion(indio_dev, adc, ch);
> > +             if (ret) {
> > +                     iio_device_release_direct_mode(indio_dev);
> > +                     return ret;
> > +             }
> > +             *val = adc->last_val[ch];
>
> You should not rely on implementation details of iio_device_claim_direct_mode()
> to protect your driver specific data structures. Use your own lock.
> Those calls are intended for safe operation when buffered mode in IIO is supported
> and currently your driver doesn't support that at all so please remove them.
>
sure will add drivers own lock.

> > +             iio_device_release_direct_mode(indio_dev);
> > +
> > +             return IIO_VAL_INT;
> > +
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static int rzg2l_adc_read_label(struct iio_dev *iio_dev,
> > +                             const struct iio_chan_spec *chan,
> > +                             char *label)
> > +{
> > +     if (chan->channel >= RZG2L_ADC_MAX_CHANNELS)
> > +             return -EINVAL;
> > +
> > +     return sysfs_emit(label, "%s\n", rzg2l_adc_channel_name[chan->channel]);
> > +}
> > +
> > +static const struct iio_info rzg2l_adc_iio_info = {
> > +     .read_raw = rzg2l_adc_read_raw,
> > +     .read_label = rzg2l_adc_read_label,
> > +};
> > +
> > +static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id)
> > +{
> > +     struct rzg2l_adc *adc = (struct rzg2l_adc *)dev_id;
>
> No need for explicit cast from void * to another pointer type.
> This is always valid without in C.
>
Agreed.

> > +     unsigned long intst;
> > +     u32 reg;
> > +     int ch;
> > +
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADSTS);
> > +
> > +     /* A/D conversion channel select error interrupt */
> > +     if (reg & RZG2L_ADSTS_CSEST) {
> > +             rzg2l_adc_writel(adc, RZG2L_ADSTS, reg);
> > +             return IRQ_HANDLED;
> > +     }
> > +
> > +     intst = reg & RZG2L_ADSTS_INTST_MASK;
> > +     if (!intst)
> > +             return IRQ_NONE;
> > +
> > +     for_each_set_bit(ch, &intst, RZG2L_ADC_MAX_CHANNELS) {
> > +             if (intst & BIT(ch))
>
> I'm missing how this if can fail given we only end up in here when the bit is
> set.
>
ADC has 8 channels RZG2L_ADSTS register bits [0:7] will be set to 1
when the given channel ADC conversion has been completed. So the above
if condition checks if the bit is set to 1 and then reads the
corresponding value of that channel.

> > +                     adc->last_val[ch] = rzg2l_adc_readl(adc, RZG2L_ADCR(ch)) &
> > +                                         RZG2L_ADCR_AD_MASK;
> > +     }
> > +
> > +     /* clear the channel interrupt */
> > +     rzg2l_adc_writel(adc, RZG2L_ADSTS, reg);
> > +
> > +     complete(&adc->completion);
> > +
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l_adc *adc)
> > +{
> > +     struct iio_chan_spec *chan_array;
> > +     struct fwnode_handle *fwnode;
> > +     struct rzg2l_adc_data *data;
> > +     unsigned int channel;
> > +     int num_channels;
> > +     int ret;
> > +     u8 i;
> > +
> > +     data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > +     if (!data)
> > +             return -ENOMEM;
> > +
> > +     num_channels = device_get_child_node_count(&pdev->dev);
> > +     if (!num_channels) {
> > +             dev_err(&pdev->dev, "no channel children\n");
> > +             return -ENODEV;
> > +     }
> > +
> > +     if (num_channels > RZG2L_ADC_MAX_CHANNELS) {
> > +             dev_err(&pdev->dev, "num of channel children out of range\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     chan_array = devm_kcalloc(&pdev->dev, num_channels, sizeof(*chan_array),
> > +                               GFP_KERNEL);
> > +     if (!chan_array)
> > +             return -ENOMEM;
> > +
> > +     i = 0;
> > +     device_for_each_child_node(&pdev->dev, fwnode) {
> > +             ret = fwnode_property_read_u32(fwnode, "reg", &channel);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             if (channel >= RZG2L_ADC_MAX_CHANNELS)
> > +                     return -EINVAL;
> > +
> > +             chan_array[i].type = IIO_VOLTAGE;
> > +             chan_array[i].indexed = 1;
> > +             chan_array[i].channel = channel;
> > +             chan_array[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> > +             chan_array[i].datasheet_name = rzg2l_adc_channel_name[channel];
> > +             i++;
> > +     }
> > +
> > +     data->num_channels = num_channels;
> > +     data->channels = chan_array;
> > +     adc->data = data;
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_adc_hw_init(struct rzg2l_adc *adc)
> > +{
> > +     int timeout = 5;
> > +     u32 reg;
> > +     int ret;
> > +
> > +     ret = clk_prepare_enable(adc->pclk);
> > +     if (ret)
> > +             return ret;
> > +
> > +     /* SW reset */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(0));
> > +     reg |= RZG2L_ADM0_SRESB;
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(0), reg);
> > +
> > +     while (!(rzg2l_adc_readl(adc, RZG2L_ADM(0)) & RZG2L_ADM0_SRESB)) {
> > +             if (!timeout) {
> > +                     ret = -EBUSY;
> > +                     goto exit_hw_init;
> > +             }
> > +             timeout--;
> > +             usleep_range(100, 200);
> > +     }
> > +
> > +     /* Only division by 4 can be set */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADIVC);
> > +     reg &= ~RZG2L_ADIVC_DIVADC_MASK;
> > +     reg |= RZG2L_ADIVC_DIVADC_4;
> > +     rzg2l_adc_writel(adc, RZG2L_ADIVC, reg);
> > +
> > +     /*
> > +      * Setup AMD3
> > +      * ADIL[31:24] - Should be always set to 0
> > +      * ADCMP[23:16] - Should be always set to 0xe
> > +      * ADSMP[15:0] - Set default (0x578) sampling period
> > +      */
> > +     reg = rzg2l_adc_readl(adc, RZG2L_ADM(3));
> > +     reg &= ~RZG2L_ADM3_ADIL_MASK;
> > +     reg &= ~RZG2L_ADM3_ADCMP_MASK;
> > +     reg &= ~RZG2L_ADM3_ADSMP_MASK;
> > +     reg |= (RZG2L_ADM3_ADCMP_E | RZG2L_ADSMP_DEFUALT_SAMPLING);
> > +     rzg2l_adc_writel(adc, RZG2L_ADM(3), reg);
> > +
> > +exit_hw_init:
> > +     clk_disable_unprepare(adc->pclk);
> > +
> > +     return 0;
> > +}
> > +
> > +static void rzg2l_adc_pm_runtime_disable(void *data)
> > +{
> > +     struct iio_dev *indio_dev = data;
>
> Register the devm call with the dev instead of the iio_dev.
> As this should be right next to the enable, it will be obvious
> what it should be.
>
Agreed will do.

> > +
> > +     pm_runtime_disable(indio_dev->dev.parent);
> > +}
> > +
> > +static void rzg2l_adc_reset_assert(void *data)
> > +{
> > +     struct reset_control *reset = data;
> Why do we need the local variable?
>
>         reset_control_assert(data);
>
> is fine.
>
Agreed.

> > +
> > +     reset_control_assert(reset);
> > +}
> > +
> > +static int rzg2l_adc_probe(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct iio_dev *indio_dev;
> > +     struct rzg2l_adc *adc;
> > +     int ret;
> > +     int irq;
> > +
> > +     indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
> > +     if (!indio_dev)
> > +             return -ENOMEM;
> > +
> > +     adc = iio_priv(indio_dev);
> > +
> > +     ret = rzg2l_adc_parse_properties(pdev, adc);
> > +     if (ret)
> > +             return ret;
> > +
> > +     adc->base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(adc->base))
> > +             return PTR_ERR(adc->base);
> > +
> > +     irq = platform_get_irq(pdev, 0);
>
> Please group things together, so we 'get' whatever it is next to where
> we use it.  It might make the error handling a tiny bit more complex, but
> it makes the code easier to review as we don't have to jump backwards and forwards
> all the time. With devm_ in heavy use as you have here, that's all magic
> in the error paths anyway :)
>
sure will move this just above the devm_request_irq().

> > +     if (irq < 0) {
> > +             dev_err(dev, "no irq resource\n");
> > +             return irq;
> > +     }
> > +
> > +     adc->pclk = devm_clk_get(dev, "pclk");
> > +     if (IS_ERR(adc->pclk)) {
> > +             dev_err(dev, "Failed to get pclk");
> > +             return PTR_ERR(adc->pclk);
> > +     }
> > +
> > +     adc->adclk = devm_clk_get(dev, "adclk");
> > +     if (IS_ERR(adc->adclk)) {
> > +             dev_err(dev, "Failed to get adclk");
> > +             return PTR_ERR(adc->adclk);
> > +     }
> > +
> > +     adc->adrstn = devm_reset_control_get_exclusive(dev, "adrst-n");
> > +     if (IS_ERR(adc->adrstn)) {
> > +             dev_err(dev, "failed to get adrstn\n");
> > +             return PTR_ERR(adc->adrstn);
> > +     }
> > +
> > +     ret = devm_add_action_or_reset(&pdev->dev,
> > +                                    rzg2l_adc_reset_assert, adc->adrstn);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to register adrstn assert devm action, %d\n",
> > +                     ret);
> > +             return ret;
> > +     }
> > +
> > +     adc->presetn = devm_reset_control_get_exclusive(dev, "presetn");
> > +     if (IS_ERR(adc->presetn)) {
> > +             dev_err(dev, "failed to get presetn\n");
> > +             return PTR_ERR(adc->presetn);
> > +     }
> > +
> > +     ret = devm_add_action_or_reset(&pdev->dev,
> > +                                    rzg2l_adc_reset_assert, adc->presetn);
>
> As already raised, wrong place.
>
Agreed.

> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to register presetn assert devm action, %d\n",
> > +                     ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = reset_control_deassert(adc->adrstn);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to deassert adrstn pin, %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = reset_control_deassert(adc->presetn);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to deassert presetn pin, %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = rzg2l_adc_hw_init(adc);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to initialize ADC HW, %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = devm_request_irq(dev, irq, rzg2l_adc_isr,
> > +                            0, dev_name(dev), adc);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     init_completion(&adc->completion);
> > +
> > +     platform_set_drvdata(pdev, indio_dev);
> > +
> > +     indio_dev->name = DRIVER_NAME;
> > +     indio_dev->info = &rzg2l_adc_iio_info;
> > +     indio_dev->modes = INDIO_DIRECT_MODE;
> > +     indio_dev->channels = adc->data->channels;
> > +     indio_dev->num_channels = adc->data->num_channels;
> > +
> > +     pm_runtime_enable(dev);
>
> I think you also want to set the state to suspended to ensure the resume is
> called on get.
>
pm_runtime_set_suspended() should only be called when runtime is
disabled or is it that I am missing something ?

> > +     ret = devm_add_action_or_reset(&pdev->dev,
> > +                                    rzg2l_adc_pm_runtime_disable, indio_dev);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to register pm_runtime_disable devm action, %d\n",
> > +                     ret);
>
> This is vanishingly unlikely as it's a tiny memory allocation.  So I would dropt he error
> print in the interests of simplicity.  Some of the other items above we don't print
> on are more likely to fail.
>
Sure will drop this.

Cheers,
Prabhakar

> > +             return ret;
> > +     }
> > +
> > +     return devm_iio_device_register(dev, indio_dev);
> > +}