Received: by 2002:a05:6a10:c7c6:0:0:0:0 with SMTP id h6csp2422934pxy; Tue, 3 Aug 2021 06:15:02 -0700 (PDT) X-Google-Smtp-Source: ABdhPJz1C5kf6Zn1O8J8V9JviTnLpfZ0MroSHhz7iFGO9bDl5osr9PnObSfvR8DsYIr7qmJ50HZ9 X-Received: by 2002:a05:6e02:525:: with SMTP id h5mr797433ils.114.1627996502716; Tue, 03 Aug 2021 06:15:02 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1627996502; cv=none; d=google.com; s=arc-20160816; b=nqw4vPJKl5STEDLYPTmhio6XNIwn+4RWKrgyfLmYJp7wAWB4xzRC3GdZEM3VdUpp01 SKDP21h0ybFvCa2WFNTuv4WtkUJFE45tj8VJpzHYXPWJmOWacPPBoAi22/l5Jg1zXGMC x4LutsIlESlYFd1ItJK+ZUz8C05TucJXOcYekO/vDimpgASbH64+Qol7jUfZs+wfglnf PFnbpAoPeEsFy/20EhaVnD3QmSLIG1jg3mRwAamL0hxEKXiQ0jObzGiYCnM7kaFIPCB1 a3+IkXCgrChT2ikiJVRjkuT2h5vylnDqXb9Ozcdi8gteYS462VNthCmzGFtVJ5xBIiQJ e79g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:dkim-signature :dkim-signature:from; bh=7lQLuXju38tEwj79L3DViIlbyax8wbq9xheJasH3Q4Q=; b=N/w2uQWF2pU0hARklqM40lVr4FKUAP6/eB2eooy08pjjJeX+9rDwL9ybdF7VOX5F26 LttZkFAJYekBz2UCC1G1IN4GYVZq+qJbzL8AhAoNrGmD7Mn7l8ZGYkLzbE9SPjlNatm+ HzO7DUTUqeK6RJAgYUu5ZuTzSnbrEoXSaMl4gorqUdco5IhPN7x/xcRL8r24pADfXUIB yoZmsmCXQy0iXmXKsK9iwyzv3xn+y8HQInvHI9yuHUQwaEGrquR/GN/tqLlU1287xExt Wyitt6TQ+EtKj/GQVyZF/OxvIT7JIxxFm8Sw3yftobkK6sc/XLzQuA/s+qdMyvD/Bd0J 5m4A== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linutronix.de header.s=2020 header.b="p/dzcKSj"; dkim=neutral (no key) header.i=@linutronix.de header.s=2020e; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=linutronix.de Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id y1si7363553iow.28.2021.08.03.06.14.50; Tue, 03 Aug 2021 06:15:02 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linutronix.de header.s=2020 header.b="p/dzcKSj"; dkim=neutral (no key) header.i=@linutronix.de header.s=2020e; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=linutronix.de Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236128AbhHCNNr (ORCPT + 99 others); Tue, 3 Aug 2021 09:13:47 -0400 Received: from Galois.linutronix.de ([193.142.43.55]:56290 "EHLO galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236321AbhHCNNV (ORCPT ); Tue, 3 Aug 2021 09:13:21 -0400 From: John Ogness DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linutronix.de; s=2020; t=1627996388; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=7lQLuXju38tEwj79L3DViIlbyax8wbq9xheJasH3Q4Q=; b=p/dzcKSjpWiJe1fRroHGimbIX+mBToRYVBAGffBSe0azfnpcgWhBZ6nbKpBqwjQm4LmPxE 4ClWYQimupQwSarDSfAe2OAx0VR8NxP0xUw3OokMk//1WBy6gbQGYsOXOtZh4wwVCZtKfu tuHbaJuDQvyHiEf11o9hm1hWLzMTjkcHyRyEg5G/hVbvxq1s6osP+Cg+UbnG52Q7FGw4YS xjefquvXM2pFtTOePkOzU5IiinBqFnTdKIROMu/ubQO7ARL9b0pOWZVzxe6sq0GtjN0ybS zqgp76W9lJBu35GggMtYohEfwPb3yk+p7yzQ+TPU8eZRmSlk6K69rP1XhahMmw== DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed; d=linutronix.de; s=2020e; t=1627996388; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=7lQLuXju38tEwj79L3DViIlbyax8wbq9xheJasH3Q4Q=; b=cRusZNAILuXvUekWtnX3KtLOA19+wczYug5ISU3Dwa/gMNEaZvm1mRLk4VB31lA8qb/gL0 UgTfGllnW8wq9zCA== To: Petr Mladek Cc: Sergey Senozhatsky , Steven Rostedt , Thomas Gleixner , linux-kernel@vger.kernel.org, Greg Kroah-Hartman , Jiri Slaby , Paul Cercueil , Matthias Brugger , Andrew Jeffery , Christophe JAILLET , Andy Shevchenko , kuldip dwivedi , Wang Qing , Andrij Abyzov , Johan Hovold , Eddie Huang , Claire Chang , Hsin-Yi Wang , Zhang Qilong , "Maciej W. Rozycki" , Guenter Roeck , Sergey Senozhatsky , Serge Semin , "Gustavo A. R. Silva" , Al Cooper , linux-serial@vger.kernel.org, linux-mips@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org Subject: [PATCH printk v1 10/10] serial: 8250: implement write_atomic Date: Tue, 3 Aug 2021 15:19:01 +0206 Message-Id: <20210803131301.5588-11-john.ogness@linutronix.de> In-Reply-To: <20210803131301.5588-1-john.ogness@linutronix.de> References: <20210803131301.5588-1-john.ogness@linutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Implement an NMI-safe write_atomic() console function in order to support synchronous console printing. Since interrupts need to be disabled during transmit, all usage of the IER register is wrapped with access functions that use the printk cpulock to synchronize register access while tracking the state of the interrupts. This is necessary because write_atomic() can be called from an NMI context that has preempted write_atomic(). Signed-off-by: John Ogness --- drivers/tty/serial/8250/8250.h | 47 ++++++++++++- drivers/tty/serial/8250/8250_core.c | 17 +++-- drivers/tty/serial/8250/8250_fsl.c | 9 +++ drivers/tty/serial/8250/8250_ingenic.c | 7 ++ drivers/tty/serial/8250/8250_mtk.c | 29 +++++++- drivers/tty/serial/8250/8250_port.c | 92 ++++++++++++++++---------- drivers/tty/serial/8250/Kconfig | 1 + include/linux/serial_8250.h | 5 ++ 8 files changed, 163 insertions(+), 44 deletions(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 6473361525d1..9e8785ab9886 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -132,12 +132,55 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value) up->dl_write(up, value); } +static inline void serial8250_set_IER(struct uart_8250_port *up, + unsigned char ier) +{ + struct uart_port *port = &up->port; + unsigned long flags; + bool is_console; + + is_console = uart_console(port); + + if (is_console) + console_atomic_cpu_lock(flags); + + serial_out(up, UART_IER, ier); + + if (is_console) + console_atomic_cpu_unlock(flags); +} + +static inline unsigned char serial8250_clear_IER(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + unsigned int clearval = 0; + unsigned long flags; + unsigned int prior; + bool is_console; + + is_console = uart_console(port); + + if (up->capabilities & UART_CAP_UUE) + clearval = UART_IER_UUE; + + if (is_console) + console_atomic_cpu_lock(flags); + + prior = serial_port_in(port, UART_IER); + serial_port_out(port, UART_IER, clearval); + + if (is_console) + console_atomic_cpu_unlock(flags); + + return prior; +} + static inline bool serial8250_set_THRI(struct uart_8250_port *up) { if (up->ier & UART_IER_THRI) return false; up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); return true; } @@ -146,7 +189,7 @@ static inline bool serial8250_clear_THRI(struct uart_8250_port *up) if (!(up->ier & UART_IER_THRI)) return false; up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); return true; } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 1ce193daea7f..fad00c0414e3 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -264,10 +264,8 @@ static void serial8250_backup_timeout(struct timer_list *t) * Must disable interrupts or else we risk racing with the interrupt * based handler. */ - if (up->port.irq) { - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - } + if (up->port.irq) + ier = serial8250_clear_IER(up); iir = serial_in(up, UART_IIR); @@ -290,7 +288,7 @@ static void serial8250_backup_timeout(struct timer_list *t) serial8250_tx_chars(up); if (up->port.irq) - serial_out(up, UART_IER, ier); + serial8250_set_IER(up, ier); spin_unlock_irqrestore(&up->port.lock, flags); @@ -568,6 +566,14 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) #ifdef CONFIG_SERIAL_8250_CONSOLE +static void univ8250_console_write_atomic(struct console *co, const char *s, + unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + + serial8250_console_write_atomic(up, s, count); +} + static void univ8250_console_write(struct console *co, const char *s, unsigned int count) { @@ -661,6 +667,7 @@ static int univ8250_console_match(struct console *co, char *name, int idx, static struct console univ8250_console = { .name = "ttyS", + .write_atomic = univ8250_console_write_atomic, .write = univ8250_console_write, .device = uart_console_device, .setup = univ8250_console_setup, diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index 4e75d2e4f87c..00e0f8f6607b 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -59,9 +59,18 @@ int fsl8250_handle_irq(struct uart_port *port) /* Stop processing interrupts on input overrun */ if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) { + unsigned long flags; unsigned long delay; + bool is_console; + is_console = uart_console(port); + + if (is_console) + console_atomic_cpu_lock(flags); up->ier = port->serial_in(port, UART_IER); + if (is_console) + console_atomic_cpu_unlock(flags); + if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) { port->ops->stop_rx(port); } else { diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 988bf6bcce42..ff0e1d84ec7e 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -146,6 +146,8 @@ OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { + unsigned long flags; + bool is_console; int ier; switch (offset) { @@ -167,7 +169,12 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) * If we have enabled modem status IRQs we should enable * modem mode. */ + is_console = uart_console(p); + if (is_console) + console_atomic_cpu_lock(flags); ier = p->serial_in(p, UART_IER); + if (is_console) + console_atomic_cpu_unlock(flags); if (ier & UART_IER_MSI) value |= UART_MCR_MDCE | UART_MCR_FCM; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index f7d3023f860f..f26140ebd67a 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -213,12 +213,37 @@ static void mtk8250_shutdown(struct uart_port *port) static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask) { - serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask)); + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int ier; + bool is_console; + + is_console = uart_console(port); + + if (is_console) + console_atomic_cpu_lock(flags); + + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, ier & (~mask)); + + if (is_console) + console_atomic_cpu_unlock(flags); } static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask) { - serial_out(up, UART_IER, serial_in(up, UART_IER) | mask); + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int ier; + + if (uart_console(port)) + console_atomic_cpu_lock(flags); + + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, ier | mask); + + if (uart_console(port)) + console_atomic_cpu_unlock(flags); } static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 2164290cbd31..2c2a5abc1baf 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -757,7 +757,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) serial_out(p, UART_EFR, UART_EFR_ECB); serial_out(p, UART_LCR, 0); } - serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + serial8250_set_IER(p, sleep ? UART_IERX_SLEEP : 0); if (p->capabilities & UART_CAP_EFR) { serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(p, UART_EFR, efr); @@ -1429,7 +1429,7 @@ static void serial8250_stop_rx(struct uart_port *port) up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); up->port.read_status_mask &= ~UART_LSR_DR; - serial_port_out(port, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); serial8250_rpm_put(up); } @@ -1459,7 +1459,7 @@ void serial8250_em485_stop_tx(struct uart_8250_port *p) serial8250_clear_and_reinit_fifos(p); p->ier |= UART_IER_RLSI | UART_IER_RDI; - serial_port_out(&p->port, UART_IER, p->ier); + serial8250_set_IER(p, p->ier); } } EXPORT_SYMBOL_GPL(serial8250_em485_stop_tx); @@ -1681,7 +1681,7 @@ static void serial8250_disable_ms(struct uart_port *port) mctrl_gpio_disable_ms(up->gpios); up->ier &= ~UART_IER_MSI; - serial_port_out(port, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); } static void serial8250_enable_ms(struct uart_port *port) @@ -1697,7 +1697,7 @@ static void serial8250_enable_ms(struct uart_port *port) up->ier |= UART_IER_MSI; serial8250_rpm_get(up); - serial_port_out(port, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); serial8250_rpm_put(up); } @@ -2124,14 +2124,7 @@ static void serial8250_put_poll_char(struct uart_port *port, struct uart_8250_port *up = up_to_u8250p(port); serial8250_rpm_get(up); - /* - * First save the IER then disable the interrupts - */ - ier = serial_port_in(port, UART_IER); - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + ier = serial8250_clear_IER(up); wait_for_xmitr(up, BOTH_EMPTY); /* @@ -2144,7 +2137,7 @@ static void serial8250_put_poll_char(struct uart_port *port, * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); - serial_port_out(port, UART_IER, ier); + serial8250_set_IER(up, ier); serial8250_rpm_put(up); } @@ -2447,7 +2440,7 @@ void serial8250_do_shutdown(struct uart_port *port) */ spin_lock_irqsave(&port->lock, flags); up->ier = 0; - serial_port_out(port, UART_IER, 0); + serial8250_set_IER(up, 0); spin_unlock_irqrestore(&port->lock, flags); synchronize_irq(port->irq); @@ -2816,7 +2809,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (up->capabilities & UART_CAP_RTOIE) up->ier |= UART_IER_RTOIE; - serial_port_out(port, UART_IER, up->ier); + serial8250_set_IER(up, up->ier); if (up->capabilities & UART_CAP_EFR) { unsigned char efr = 0; @@ -3282,7 +3275,7 @@ EXPORT_SYMBOL_GPL(serial8250_set_defaults); #ifdef CONFIG_SERIAL_8250_CONSOLE -static void serial8250_console_putchar(struct uart_port *port, int ch) +static void serial8250_console_putchar_locked(struct uart_port *port, int ch) { struct uart_8250_port *up = up_to_u8250p(port); @@ -3290,6 +3283,18 @@ static void serial8250_console_putchar(struct uart_port *port, int ch) serial_port_out(port, UART_TX, ch); } +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + wait_for_xmitr(up, UART_LSR_THRE); + + console_atomic_cpu_lock(flags); + serial8250_console_putchar_locked(port, ch); + console_atomic_cpu_unlock(flags); +} + /* * Restore serial console when h/w power-off detected */ @@ -3311,6 +3316,32 @@ static void serial8250_console_restore(struct uart_8250_port *up) serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); } +void serial8250_console_write_atomic(struct uart_8250_port *up, + const char *s, unsigned int count) +{ + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int ier; + + console_atomic_cpu_lock(flags); + + touch_nmi_watchdog(); + + ier = serial8250_clear_IER(up); + + if (atomic_fetch_inc(&up->console_printing)) { + uart_console_write(port, "\n", 1, + serial8250_console_putchar_locked); + } + uart_console_write(port, s, count, serial8250_console_putchar_locked); + atomic_dec(&up->console_printing); + + wait_for_xmitr(up, BOTH_EMPTY); + serial8250_set_IER(up, ier); + + console_atomic_cpu_unlock(flags); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -3327,24 +3358,12 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, struct uart_port *port = &up->port; unsigned long flags; unsigned int ier; - int locked = 1; touch_nmi_watchdog(); - if (oops_in_progress) - locked = spin_trylock_irqsave(&port->lock, flags); - else - spin_lock_irqsave(&port->lock, flags); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_port_in(port, UART_IER); + spin_lock_irqsave(&port->lock, flags); - if (up->capabilities & UART_CAP_UUE) - serial_port_out(port, UART_IER, UART_IER_UUE); - else - serial_port_out(port, UART_IER, 0); + ier = serial8250_clear_IER(up); /* check scratch reg to see if port powered off during system sleep */ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { @@ -3358,7 +3377,9 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, mdelay(port->rs485.delay_rts_before_send); } + atomic_inc(&up->console_printing); uart_console_write(port, s, count, serial8250_console_putchar); + atomic_dec(&up->console_printing); /* * Finally, wait for transmitter to become empty @@ -3371,8 +3392,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, if (em485->tx_stopped) up->rs485_stop_tx(up); } - - serial_port_out(port, UART_IER, ier); + serial8250_set_IER(up, ier); /* * The receive handling will happen properly because the @@ -3384,8 +3404,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, if (up->msr_saved_flags) serial8250_modem_status(up); - if (locked) - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&port->lock, flags); } static unsigned int probe_baud(struct uart_port *port) @@ -3405,6 +3424,7 @@ static unsigned int probe_baud(struct uart_port *port) int serial8250_console_setup(struct uart_port *port, char *options, bool probe) { + struct uart_8250_port *up = up_to_u8250p(port); int baud = 9600; int bits = 8; int parity = 'n'; @@ -3414,6 +3434,8 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe) if (!port->iobase && !port->membase) return -ENODEV; + atomic_set(&up->console_printing, 0); + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else if (probe) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index d1b3c2373fa4..1671d2882ba7 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -9,6 +9,7 @@ config SERIAL_8250 depends on !S390 select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB + select HAVE_ATOMIC_CONSOLE help This selects whether you want to include the driver for the standard serial ports. The standard answer is Y. People who might say N diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 5db211f43b29..aa011f668705 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -7,6 +7,7 @@ #ifndef _LINUX_SERIAL_8250_H #define _LINUX_SERIAL_8250_H +#include #include #include #include @@ -125,6 +126,8 @@ struct uart_8250_port { #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA unsigned char msr_saved_flags; + atomic_t console_printing; + struct uart_8250_dma *dma; const struct uart_8250_ops *ops; @@ -180,6 +183,8 @@ void serial8250_init_port(struct uart_8250_port *up); void serial8250_set_defaults(struct uart_8250_port *up); void serial8250_console_write(struct uart_8250_port *up, const char *s, unsigned int count); +void serial8250_console_write_atomic(struct uart_8250_port *up, const char *s, + unsigned int count); int serial8250_console_setup(struct uart_port *port, char *options, bool probe); int serial8250_console_exit(struct uart_port *port); -- 2.20.1