Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S936000AbWK1T7A (ORCPT ); Tue, 28 Nov 2006 14:59:00 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S936084AbWK1T7A (ORCPT ); Tue, 28 Nov 2006 14:59:00 -0500 Received: from smtp3.Stanford.EDU ([171.67.20.26]:60078 "EHLO smtp3.stanford.edu") by vger.kernel.org with ESMTP id S936083AbWK1T65 (ORCPT ); Tue, 28 Nov 2006 14:58:57 -0500 Subject: 2.6.19-rc6-rt8: alsa xruns From: Fernando Lopez-Lezcano To: Ingo Molnar , "Linux-Kernel," Cc: nando@ccrma.Stanford.EDU Content-Type: text/plain Date: Tue, 28 Nov 2006 11:58:51 -0800 Message-Id: <1164743931.15887.34.camel@cmn3.stanford.edu> Mime-Version: 1.0 X-Mailer: Evolution 2.2.3 (2.2.3-4.fc4) Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38600 Lines: 846 Hi, I'm trying out the latest -rt patch and getting alsa xruns when using jackd and jack clients. This is a sample from the output of qjackctl / jackd (jack 0.102.25, qjackctl 0.2.21): -------- **** alsa_pcm: xrun of at least 0.034 msecs 11:38:03.681 XRUN callback (154). delay of 18710.000 usecs exceeds estimated spare time of 2604.000; restart ... delay of 31993.000 usecs exceeds estimated spare time of 2605.000; restart ... 11:38:12.748 XRUN callback (155). delay of 110914.000 usecs exceeds estimated spare time of 2605.000; restart ... 11:38:14.976 XRUN callback (156). **** alsa_pcm: xrun of at least 0.033 msecs 11:38:15.547 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 0.033 msecs 11:38:20.044 XRUN callback (158). **** alsa_pcm: xrun of at least 0.035 msecs 11:38:21.903 XRUN callback (159). delay of 5480.000 usecs exceeds estimated spare time of 2600.000; restart ... 11:38:23.758 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 10.878 msecs 11:38:55.076 XRUN callback (161). **** alsa_pcm: xrun of at least 5.338 msecs 11:38:56.750 XRUN callback (162). delay of 12588.000 usecs exceeds estimated spare time of 2606.000; restart ... 11:39:13.049 XRUN callback (163). **** alsa_pcm: xrun of at least 0.258 msecs 11:39:15.039 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 0.032 msecs 11:39:28.572 XRUN callback (165). **** alsa_pcm: xrun of at least 10.818 msecs 11:41:03.001 XRUN callback (166). **** alsa_pcm: xrun of at least 6.475 msecs 11:41:14.144 XRUN callback (167). **** alsa_pcm: xrun of at least 4.931 msecs 11:41:25.643 XRUN callback (168). **** alsa_pcm: xrun of at least 21.347 msecs 11:41:28.163 XRUN callback (169). **** alsa_pcm: xrun of at least 11.910 msecs 11:41:28.513 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 5.623 msecs 11:42:04.347 XRUN callback (171). delay of 180434.000 usecs exceeds estimated spare time of 2607.000; restart ... 11:43:13.748 XRUN callback (172). delay of 205776.000 usecs exceeds estimated spare time of 2607.000; restart ... delay of 221779.000 usecs exceeds estimated spare time of 2607.000; restart ... 11:43:15.263 XRUN callback (2 skipped). delay of 25987.000 usecs exceeds estimated spare time of 2607.000; restart ... 11:43:24.325 XRUN callback (175). delay of 25990.000 usecs exceeds estimated spare time of 2607.000; restart ... 11:43:25.519 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 31.450 msecs 11:43:29.760 XRUN callback (177). **** alsa_pcm: xrun of at least 35.110 msecs 11:44:12.244 XRUN callback (178). **** alsa_pcm: xrun of at least 1.843 msecs 11:45:25.668 XRUN callback (179). 11:46:19.516 XRUN callback (180). **** alsa_pcm: xrun of at least 15.978 msecs delay of 50782.000 usecs exceeds estimated spare time of 2606.000; restart ... 11:46:41.114 XRUN callback (181). **** alsa_pcm: xrun of at least 17.744 msecs 11:46:54.612 XRUN callback (182). **** alsa_pcm: xrun of at least 0.089 msecs 11:47:02.364 XRUN callback (183). **** alsa_pcm: xrun of at least 0.027 msecs 11:47:03.102 XRUN callback (1 skipped). delay of 3891.000 usecs exceeds estimated spare time of 2608.000; restart ... 11:47:04.812 XRUN callback (185). delay of 5224.000 usecs exceeds estimated spare time of 2577.000; restart ... **** alsa_pcm: xrun of at least 0.501 msecs 11:47:05.151 XRUN callback (2 skipped). 11:47:13.614 XRUN callback (188). delay of 15536.000 usecs exceeds estimated spare time of 2602.000; restart ... **** alsa_pcm: xrun of at least 0.156 msecs 11:47:15.461 XRUN callback (1 skipped). **** alsa_pcm: xrun of at least 0.037 msecs 11:47:41.528 XRUN callback (190). delay of 5303.000 usecs exceeds estimated spare time of 2606.000; restart ... 11:47:45.515 XRUN callback (191). **** alsa_pcm: xrun of at least 0.361 msecs 11:48:25.755 XRUN callback (192). delay of 2940.000 usecs exceeds estimated spare time of 2601.000; restart ... 11:49:28.306 XRUN callback (193). delay of 20574.000 usecs exceeds estimated spare time of 2615.000; restart ... 11:49:43.013 XRUN callback (194). **** alsa_pcm: xrun of at least 0.030 msecs 11:50:41.496 XRUN callback (195). **** alsa_pcm: xrun of at least 27.624 msecs 11:51:04.761 XRUN callback (196). **** alsa_pcm: xrun of at least 13.712 msecs 11:51:24.033 XRUN callback (197). delay of 3956.000 usecs exceeds estimated spare time of 2611.000; restart ... 11:51:54.670 XRUN callback (198). **** alsa_pcm: xrun of at least 0.033 msecs 11:51:56.452 XRUN callback (199). **** alsa_pcm: xrun of at least 0.039 msecs 11:52:00.756 XRUN callback (200). **** alsa_pcm: xrun of at least 0.732 msecs 11:52:29.894 XRUN callback (201). -------- The test machine is an Athlon X2 4400 running FC6 x86_64 booting into a rebuilt 2.6.19-rc6-rt8 rpm package based on Ingo's packages (same .config except for 4KSTACKS=off). - jackd and clients running with realtime priorities - irqs priorities reordered with the rtirq script, this is the status after running it: -------- PID CLS RTPRIO NI PRI %CPU STAT COMMAND 5 FF 99 - 139 0.0 S softirq-timer/0 17 FF 99 - 139 0.0 S softirq-timer/1 348 FF 80 - 120 0.0 S< IRQ 8 rtc 1081 FF 70 - 110 1.1 S< IRQ 18 ohci1394, ICE1712 436 FF 69 - 109 0.0 S< IRQ 20 ehci_hcd:usb3, NVidia CK8S 432 FF 60 - 100 0.0 S< IRQ 21 ohci_hcd:usb2 431 FF 59 - 99 0.0 S< IRQ 22 ohci_hcd:usb1, libata 413 FF 50 - 90 0.0 S< IRQ 1 i8042 73 FF 49 - 89 0.0 S< IRQ 9 acpi 412 FF 49 - 89 0.0 S< IRQ 12 i8042 383 FF 47 - 87 0.0 S< IRQ 14 ide0 468 FF 41 - 81 0.0 S< IRQ 17 libata 1034 FF 40 - 80 0.0 S< IRQ 19 eth0 1145 FF 38 - 78 0.0 S< IRQ 6 floppy 1491 FF 37 - 77 0.0 S< IRQ 7 parport0 4 FF 1 - 41 0.0 S softirq-high/0 6 FF 1 - 41 0.0 S softirq-net-tx/ 7 FF 1 - 41 0.0 S softirq-net-rx/ 8 FF 1 - 41 0.0 S softirq-block/0 9 FF 1 - 41 0.0 S softirq-tasklet 10 FF 1 - 41 0.0 S softirq-hrtimer 11 FF 1 - 41 0.0 S softirq-rcu/0 16 FF 1 - 41 0.0 S softirq-high/1 18 FF 1 - 41 0.0 S softirq-net-tx/ 19 FF 1 - 41 0.0 S softirq-net-rx/ 20 FF 1 - 41 0.0 S softirq-block/1 21 FF 1 - 41 0.0 S softirq-tasklet 22 FF 1 - 41 0.0 S softirq-hrtimer 23 FF 1 - 41 0.0 S softirq-rcu/1 -------- and these are the interrupts: -------- CPU0 CPU1 0: 88 1033 IO-APIC-edge timer 1: 2239 1194 IO-APIC-edge i8042 6: 0 6 IO-APIC-edge floppy 7: 0 0 IO-APIC-edge parport0 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 96809 1404 IO-APIC-edge i8042 14: 48064 574 IO-APIC-edge ide0 17: 0 0 IO-APIC-fasteoi libata 18: 878 3921815 IO-APIC-fasteoi ohci1394, ICE1712 19: 63049 14 IO-APIC-fasteoi eth0 20: 0 0 IO-APIC-fasteoi ehci_hcd:usb3, NVidia CK8S 21: 0 586 IO-APIC-fasteoi ohci_hcd:usb2 22: 88081 10197 IO-APIC-fasteoi ohci_hcd:usb1, libata NMI: 20028857 18536099 LOC: 849887 848257 ERR: 0 -------- (the soundcard being used by jackd is the ICE1712, IRQ 18, jackd runs with priority 62/72) What follows is the output of dmesg. At the end you can find the latency wakeup numbers. It goes back to a low value each time I reset the counter in proc. -- Fernando This is from dmesg: -------- Linux version 2.6.18-1.0001.3.rt8.fc6.ccrma (machbuild@planetforge.stanford.edu) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP PREEMPT Tue Nov 28 12:34:38 EST 2006 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f6c90 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff7bc0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000007fff0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000007fff0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524272 On node 0 totalpages: 524175 DMA zone: 96 pages used for memmap DMA zone: 2299 pages reserved DMA zone: 1604 pages, LIFO batch:0 DMA32 zone: 12191 pages used for memmap DMA32 zone: 507985 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 70144 bytes of per cpu data Real-Time Preemption Support (C) 2004-2006 Ingo Molnar Built 1 zonelists. Total pages: 509589 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) Clock event device pit configured with caps set: 07 Console: colour VGA+ 80x25 num_possible_cpus(): 2 CPU#0: allocated 6291408 bytes trace buffer. CPU#0: allocated 6291408 bytes max-trace buffer. CPU#1: allocated 6291408 bytes trace buffer. CPU#1: allocated 6291408 bytes max-trace buffer. allocated 12582816 bytes out-trace buffer. tracer: a total of 37748448 bytes allocated. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ f0000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:00:00 Aperture from AGP @ f0000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Memory: 1930732k/2097088k available (2588k kernel code, 165968k reserved, 1853k data, 352k init) Calibrating delay using timer specific routine.. 4424.19 BogoMIPS (lpj=8848387) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12561226 Detected 12.561 MHz APIC timer. lapic max_delta_ns: 667817485 Clock event device pit new caps set: 01 Clock event device lapic configured with caps set: 06 SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4421.93 BogoMIPS (lpj=8843862) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 Clock event device pit new caps set: 01 Clock event device lapic configured with caps set: 06 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=480 checking if image is initramfs... it is Freeing initrd memory: 1525k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default agpgart: Detected AGP bridge 0 agpgart: Aperture conflicts with PCI mapping. agpgart: Aperture from AGP @ f0000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. PCI-DMA: Disabling IOMMU. pnp: 00:00: ioport range 0x1000-0x107f could not be reserved pnp: 00:00: ioport range 0x1080-0x10ff has been reserved pnp: 00:00: ioport range 0x1400-0x147f has been reserved pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved pnp: 00:00: ioport range 0x1800-0x187f has been reserved pnp: 00:00: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:0b.0 IO window: 7000-7fff MEM window: f2000000-f3ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:0e.0 IO window: 8000-afff MEM window: f4000000-f5ffffff PREFETCH window: 88000000-880fffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered Initializing RT-Tester: OK audit: initializing netlink socket (disabled) audit(1164737006.388:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice kvm: no hardware support TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00) powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 352k freed Time: tsc clocksource has been installed. Clock event device pit disabled Clock event device lapic configured with caps set: 08 Switched to high resolution mode on CPU 0 Write protecting the kernel read-only data: 486k Clock event device lapic configured with caps set: 08 Switched to high resolution mode on CPU 1 input: AT Translated Set 2 keyboard as /class/input/input0 Time: acpi_pm clocksource has been installed. USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6003000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.1: irq 21, io mem 0xf6004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.2: debug port 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 20, io mem 0xf6005000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:0a.0: version 2.0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 22 scsi0 : sata_nv input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6, max UDMA/133, 156299375 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda sata_sil 0000:02:0d.0: version 2.0 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 ata3: SATA max UDMA/100 cmd 0xFFFFC2000001A080 ctl 0xFFFFC2000001A08A bmdma 0xFFFFC2000001A000 irq 17 ata4: SATA max UDMA/100 cmd 0xFFFFC2000001A0C0 ctl 0xFFFFC2000001A0CA bmdma 0xFFFFC2000001A008 irq 17 scsi2 : sata_sil ata3: SATA link down (SStatus 0 SControl 310) scsi3 : sata_sil ata4: SATA link down (SStatus 0 SControl 310) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1164737012.513:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1569 types, 170 bools, 1 sens, 1024 cats security: 59 classes, 48714 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1164737012.989:3): policy loaded auid=4294967295 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:05.0 to 64 input: PC Speaker as /class/input/input2 eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:05.0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 skge 1.9 addr 0xf5000000 irq 19 chip Yukon-Lite rev 9 skge eth1: addr 00:14:85:02:11:83 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f5008000-f50087ff] Max Packet=[4096] IR/IT contexts=[4/8] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 54567 usecs intel8x0: clocking to 46912 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00148556000157de] parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.25.0 20060524 on minor 0 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 344 bytes per conntrack process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth1: no link during initialization. ADDRCONF(NETDEV_UP): eth1: link is not ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 eth0: no IPv6 routers present ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [drm:drm_unlock] *ERROR* Process 3225 using kernel context 0 ( softirq-timer/0-5 |#0): new 7 us maximum-latency wakeup. ( jackd-3457 |#0): new 12 us maximum-latency wakeup. ( beagled-3410 |#1): new 15 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 15 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 15 us maximum-latency wakeup. ( beagled-3410 |#1): new 16 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 16 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 19 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 21 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 22 us maximum-latency wakeup. ( escd-3378 |#1): new 27 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 27 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 4007 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 13 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 15 us maximum-latency wakeup. ( mono-3626 |#0): new 16 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 17 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 17 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 18 us maximum-latency wakeup. ( jackd-3457 |#0): new 19 us maximum-latency wakeup. ( jackd-3457 |#0): new 19 us maximum-latency wakeup. ( jackd-3457 |#0): new 22 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 24 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 25 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 26 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 27 us maximum-latency wakeup. ( jackd-3457 |#0): new 79 us maximum-latency wakeup. ( jackd-3457 |#0): new 264 us maximum-latency wakeup. ( jackd-3457 |#0): new 1857 us maximum-latency wakeup. ( gnome-terminal-3429 |#1): new 11 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 13 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 16 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 17 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 17 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 18 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 20 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 22 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 22 us maximum-latency wakeup. ( IRQ 19-1034 |#0): new 26 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 27 us maximum-latency wakeup. ( mono-3626 |#1): new 27 us maximum-latency wakeup. ( IRQ 22-431 |#0): new 29 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 32 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 4007 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 4010 us maximum-latency wakeup. ( Xorg-3225 |#0): new 4 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 7 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 9 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 17 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 17 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 18 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 23 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 25 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 25 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 28 us maximum-latency wakeup. ( jackd-4037 |#0): new 590 us maximum-latency wakeup. ( japa-4096 |#0): new 821 us maximum-latency wakeup. ( japa-4096 |#0): new 1938 us maximum-latency wakeup. ( japa-4096 |#0): new 2241 us maximum-latency wakeup. ( IRQ 18-1081 |#0): new 4011 us maximum-latency wakeup. ( IRQ 18-1081 |#0): new 11185 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 12014 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 9 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 11 us maximum-latency wakeup. ( pcscd-2690 |#1): new 14 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 15 us maximum-latency wakeup. ( gdm-binary-3224 |#1): new 15 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 16 us maximum-latency wakeup. ( snd-4040 |#0): new 18 us maximum-latency wakeup. ( jaaa-4092 |#0): new 19 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 22 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 22 us maximum-latency wakeup. ( japa-4096 |#0): new 759 us maximum-latency wakeup. ( IRQ 18-1081 |#0): new 9592 us maximum-latency wakeup. ( metacity-3327 |#0): new 8 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 9 us maximum-latency wakeup. ( aeolus-4085 |#1): new 12 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 14 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 15 us maximum-latency wakeup. ( japa-4096 |#0): new 16 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 17 us maximum-latency wakeup. ( japa-4096 |#0): new 17 us maximum-latency wakeup. ( beagled-3412 |#1): new 19 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 26 us maximum-latency wakeup. ( snd-4040 |#1): new 1107 us maximum-latency wakeup. ( japa-4096 |#0): new 1445 us maximum-latency wakeup. ( japa-4096 |#0): new 2110 us maximum-latency wakeup. ( qjackctl-4038 |#1): new 2328 us maximum-latency wakeup. ( japa-4096 |#0): new 2548 us maximum-latency wakeup. ( IRQ 18-1081 |#0): new 10291 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 14 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 15 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 19 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 21 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 23 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 5145 us maximum-latency wakeup. ( IRQ 18-1081 |#0): new 5494 us maximum-latency wakeup. ( softirq-timer/0-5 |#0): new 14 us maximum-latency wakeup. ( gnome-terminal-3429 |#1): new 14 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 15 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 17 us maximum-latency wakeup. ( snd-4040 |#0): new 19 us maximum-latency wakeup. ( softirq-timer/1-17 |#1): new 19 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 22 us maximum-latency wakeup. ( IRQ 18-1081 |#1): new 23 us maximum-latency wakeup. ( japa-4096 |#0): new 1781 us maximum-latency wakeup. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/