Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 14 Nov 2001 16:52:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 14 Nov 2001 16:52:35 -0500 Received: from moutvdom01.kundenserver.de ([195.20.224.200]:29992 "EHLO moutvdom01.kundenserver.de") by vger.kernel.org with ESMTP id ; Wed, 14 Nov 2001 16:52:18 -0500 Content-Type: text/plain; charset="iso-8859-1" From: Hans-Peter Jansen Organization: TreeWater Society Berlin To: sensors@stimpy.netroedge.com Subject: Re: [lm_sensors] hard lockup on modprobe w83781d with Tyan Dual K7/Thunder Date: Wed, 14 Nov 2001 22:52:13 +0100 X-Mailer: KMail [version 1.3] Cc: linux-kernel@vger.kernel.org In-Reply-To: <20011114180440.A8934A99@shrek.lisa.de> In-Reply-To: <20011114180440.A8934A99@shrek.lisa.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011114215215.0692E1097@shrek.lisa.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wednesday, 14. November 2001 19:04, Hans-Peter Jansen wrote: > Hello, > > I'm trying to get serveral lm_sensor versions up to CVS lm_sensors2 from > yesterday to run on this mb. Now, I'm at linux-2.4.15-pre4, but also tried > some 2.4.12(-ac?) versions, to no avail. I finally managed to get the w83781d loading under 2.4.13-ac7. (b/c it's butt kicking processor power) But it's readings are bogus : tyrex:~# sensors w83782d-i2c-0-2d Adapter: SMBus AMD7X6 adapter at 80e0 Algorithm: Non-I2C SMBus adapter VCore 1: +1.72 V (min = +1.74 V, max = +1.93 V) ALARM <1.75> VCore 2: +2.83 V (min = +1.74 V, max = +1.93 V) <1.76> +3.3V: +3.32 V (min = +3.13 V, max = +3.45 V) +5V: +4.89 V (min = +4.72 V, max = +5.24 V) <5.11> +12V: +4.67 V (min = +10.79 V, max = +13.19 V) <12.35> -12V: -2.01 V (min = -10.90 V, max = -13.21 V) <-12.15> -5V: +2.71 V (min = -4.76 V, max = -5.26 V) V5SB: +4.32 V (min = +4.72 V, max = +5.24 V) VBat: +3.29 V (min = +2.40 V, max = +3.60 V) fan1: 7180 RPM (min = 3000 RPM, div = 2) <3590> fan2: 7105 RPM (min = 3000 RPM, div = 2) <3515> fan3: 0 RPM (min = 3000 RPM, div = 2) temp1: +77.0?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor <46?C> temp2: +76.5?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor <41?C> temp3: +77.0?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor <46?C> vid: +1.85 V alarms: Chassis intrusion detection ALARM beep_enable: Sound alarm disabled ALARM flags seems to appear randomly and unrelated to error conditions. Do I need completely new formula's for that beast? Any further suggestions? Cheers, Hans-Peter - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/