Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.62.198 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.62.198; helo=xsj-pvapexch02.xlnx.xilinx.com;
Envelope-to: git@xilinx.com,
 linux-kernel@vger.kernel.org,
 linux-arm-kernel@lists.infradead.org,
 devicetree@vger.kernel.org,
 linux-gpio@vger.kernel.org,
 robh+dt@kernel.org,
 bgolaszewski@baylibre.com,
 iwamatsu@nigauri.org,
 linus.walleij@linaro.org,
 gregkh@linuxfoundation.org,
 zou_wei@huawei.com,
 arnd@arndb.de
Subject: Re: [PATCH V2 1/3] firmware: zynqmp: Add MMIO read and write support
 for PS_MODE pin
To:     Piyush Mehta <piyush.mehta@xilinx.com>, <arnd@arndb.de>,
        <zou_wei@huawei.com>, <gregkh@linuxfoundation.org>,
        <linus.walleij@linaro.org>, <michal.simek@xilinx.com>,
        <wendy.liang@xilinx.com>, <iwamatsu@nigauri.org>,
        <bgolaszewski@baylibre.com>, <robh+dt@kernel.org>,
        <rajan.vaja@xilinx.com>
CC:     <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <git@xilinx.com>, <sgoud@xilinx.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
References: <20210805174219.3000667-1-piyush.mehta@xilinx.com>
 <20210805174219.3000667-2-piyush.mehta@xilinx.com>
From:   Michal Simek <michal.simek@xilinx.com>
Message-ID: <2cef2e97-18f8-9765-2600-27aa219fb2b2@xilinx.com>
Date:   Fri, 6 Aug 2021 07:49:02 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.12.0
MIME-Version: 1.0
In-Reply-To: <20210805174219.3000667-2-piyush.mehta@xilinx.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 06 Aug 2021 05:49:08.2199
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 0bdedfad-8d81-4e8e-8459-08d9589de87a
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch02.xlnx.xilinx.com]
X-MS-Exchange-CrossTenant-AuthSource: SN1NAM02FT0053.eop-nam02.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH2PR02MB6773
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org


On 8/5/21 7:42 PM, Piyush Mehta wrote:
> Add Xilinx ZynqMP firmware MMIO APIs support to set and get PS_MODE
> pins value and status. These APIs create an interface path between
> mode pin controller driver and low-level API to access GPIO pins.
> 
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> ---
> Changes in v2:
> - Added Xilinx ZynqMP firmware MMIO API support to set and get pin
>   value and status.
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 46 ++++++++++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 14 +++++++++++
>  2 files changed, 60 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 15b13832..0234423 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -28,6 +28,13 @@
>  /* Max HashMap Order for PM API feature check (1<<7 = 128) */
>  #define PM_API_FEATURE_CHECK_MAX_ORDER  7
>  
> +/* CRL registers and bitfields */
> +#define CRL_APB_BASE			0xFF5E0000U
> +/* BOOT_PIN_CTRL- Used to control the mode pins after boot */
> +#define CRL_APB_BOOT_PIN_CTRL		(CRL_APB_BASE + (0x250U))
> +/* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */
> +#define CRL_APB_BOOTPIN_CTRL_MASK	0xF0FU
> +
>  static bool feature_check_enabled;
>  static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
>  
> @@ -926,6 +933,45 @@ int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
>  EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
>  
>  /**
> + * zynqmp_pm_bootmode_read() - PM Config API for read bootpin status
> + * @ps_mode: Returned output value of ps_mode
> + *
> + * This API function is to be used for notify the power management controller
> + * to read bootpin status.
> + *
> + * Return: status, either success or error+reason
> + */
> +unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
> +{
> +	unsigned int ret;
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +
> +	ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, CRL_APB_BOOT_PIN_CTRL, 0,
> +				  0, 0, ret_payload);
> +
> +	*ps_mode = ret_payload[1];
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read);
> +
> +/**
> + * zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin
> + * @ps_mode: Value to be written to the bootpin ctrl register
> + *
> + * This API function is to be used for notify the power management controller
> + * to configure bootpin.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_bootmode_write(u32 ps_mode)
> +{
> +	return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, CRL_APB_BOOT_PIN_CTRL,
> +				   CRL_APB_BOOTPIN_CTRL_MASK, ps_mode, 0, NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write);
> +
> +/**
>   * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
>   *			       master has initialized its own power management
>   *
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 9d1a5c1..dc6f39f 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -68,6 +68,8 @@ enum pm_api_id {
>  	PM_SET_REQUIREMENT = 15,
>  	PM_RESET_ASSERT = 17,
>  	PM_RESET_GET_STATUS = 18,
> +	PM_MMIO_WRITE = 19,
> +	PM_MMIO_READ = 20,
>  	PM_PM_INIT_FINALIZE = 21,
>  	PM_FPGA_LOAD = 22,
>  	PM_FPGA_GET_STATUS = 23,
> @@ -386,6 +388,8 @@ int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type);
>  int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
>  			   const enum zynqmp_pm_reset_action assert_flag);
>  int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status);
> +unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode);
> +int zynqmp_pm_bootmode_write(u32 ps_mode);
>  int zynqmp_pm_init_finalize(void);
>  int zynqmp_pm_set_suspend_mode(u32 mode);
>  int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
> @@ -515,6 +519,16 @@ static inline int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
>  	return -ENODEV;
>  }
>  
> +static inline unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_bootmode_write(u32 ps_mode)
> +{
> +	return -ENODEV;
> +}
> +
>  static inline int zynqmp_pm_init_finalize(void)
>  {
>  	return -ENODEV;
> 

Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal