Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2 00/33] arm64: zynqmp: Extend board description
To:     Michal Simek <michal.simek@xilinx.com>,
        linux-kernel@vger.kernel.org, git@xilinx.com,
        Viresh Kumar <viresh.kumar@linaro.org>
Cc:     Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Michael Walle <michael@walle.cc>,
        Quanyang Wang <quanyang.wang@windriver.com>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
References: <cover.1623684253.git.michal.simek@xilinx.com>
From:   Michal Simek <monstr@monstr.eu>
Message-ID: <4380bec9-a451-52fe-a49f-e305821f7ee9@monstr.eu>
Date:   Fri, 6 Aug 2021 10:23:28 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.12.0
MIME-Version: 1.0
In-Reply-To: <cover.1623684253.git.michal.simek@xilinx.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 6/14/21 5:25 PM, Michal Simek wrote:
> Hi,
> 
> over years couple of drivers were upstream and it is time to sync it up.
> On the top of it also adding new Kria boards which are using new overlay
> infrastructure which check if that overlays can be applied to base DT file.
> 
> Thanks,
> Michal
> 
> Changes in v2:
> - Add reviewed-by from Laurent
> - New patch in the series
> - New patch in the series
> - Use sugar syntax - reported by Geert
> - Update copyright years
> - Fix SD3.0 comment alignment
> - Remove one newline from Makefile
> 
> Amit Kumar Mahapatra (1):
>   arm64: zynqmp: Do not duplicate flash partition label property
> 
> Michal Simek (29):
>   arm64: zynqmp: Disable CCI by default
>   arm64: zynqmp: Enable fpd_dma for zcu104 platforms
>   arm64: zynqmp: Fix irps5401 device nodes
>   arm64: zynqmp: Add pinctrl description for all boards
>   arm64: zynqmp: Correct zcu111 psgtr description
>   arm64: zynqmp: Wire psgtr for zc1751-xm015
>   arm64: zynqmp: Correct psgtr description for zcu100-revC
>   arm64: zynqmp: Add phy description for usb3.0
>   arm64: zynqmp: Disable WP on zcu111
>   arm64: zynqmp: Add missing mio-bank properties to dc1 and dc5
>   arm64: zynqmp: Wire DP and DPDMA for dc1/dc4
>   arm64: zynqmp: Enable nand driver for dc2 and dc3
>   arm64: zynqmp: Remove additional newline
>   arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsi
>   arm64: zynqmp: Add nvmem alises for eeproms
>   arm64: zynqmp: List reset property for ethernet phy
>   arm64: zynqmp: Remove can aliases from zc1751
>   arm64: zynqmp: Move DP nodes to the end of file on zcu106
>   arm64: zynqmp: Add note about UHS mode on some boards
>   arm64: zynqmp: Remove information about dma clock on zcu106
>   arm64: zynqmp: Wire qspi on multiple boards
>   arm64: zynqmp: Move rtc to different location on zcu104-revA
>   arm64: zynqmp: Add reset description for sata
>   arm64: zynqmp: Sync psgtr node location with zcu104-revA
>   arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
>   arm64: zynqmp: Add support for zcu102-rev1.1 board
>   arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
>   arm64: zynqmp: Add psgtr description to zc1751 dc1 board
>   arm64: zynqmp: Add support for Xilinx Kria SOM board
> 
> Mounika Grace Akula (1):
>   arm64: zynqmp: Add reset-on-timeout to all boards and modify default
>     timeout value
> 
> Srinivas Neeli (1):
>   arm64: zynqmp: Update rtc calibration value
> 
> Stefano Stabellini (1):
>   arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsi
> 
>  .../devicetree/bindings/arm/xilinx.yaml       |  32 ++
>  arch/arm64/boot/dts/xilinx/Makefile           |  11 +
>  .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  13 +-
>  .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts  | 335 +++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts  | 318 ++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 289 +++++++++++++++
>  .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts   |  21 ++
>  .../boot/dts/xilinx/zynqmp-zc1232-revA.dts    |  16 +-
>  .../boot/dts/xilinx/zynqmp-zc1254-revA.dts    |  16 +-
>  .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts    | 298 ++++++++++++++-
>  .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    | 342 +++++++++++++++++-
>  .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts    |  23 +-
>  .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts    |  24 +-
>  .../dts/xilinx/zynqmp-zc1751-xm019-dc5.dts    | 330 ++++++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    | 264 +++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts  |  15 +
>  .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 321 +++++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu102-revB.dts    |   3 +-
>  .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    | 292 ++++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    | 250 ++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 341 ++++++++++++++++-
>  .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    | 275 +++++++++++++-
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  99 +++--
>  23 files changed, 3833 insertions(+), 95 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
> 

Applied 1-30, 32.

31 and 33 requires newer version.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs