Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 6 Aug 2021 18:09:19 +0530
From:   Vinod Koul <vkoul@kernel.org>
To:     rashmi.a@intel.com
Cc:     linux-drivers-review-request@eclists.intel.com,
        michal.simek@xilinx.com, ulf.hansson@linaro.org,
        linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, kishon@ti.com,
        andriy.shevchenko@linux.intel.com, linux-phy@lists.infradead.org,
        mgross@linux.intel.com, kris.pan@linux.intel.com,
        furong.zhou@intel.com, mallikarjunappa.sangannavar@intel.com,
        adrian.hunter@intel.com, mahesh.r.vaidya@intel.com,
        nandhini.srikandan@intel.com, kenchappa.demakkanavar@intel.com
Subject: Re: [PATCH 3/3] phy: intel: Add Thunder Bay eMMC PHY support
Message-ID: <YQ0td9y5+RNFxWZs@matsya>
References: <20210730063309.8194-1-rashmi.a@intel.com>
 <20210730063309.8194-4-rashmi.a@intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210730063309.8194-4-rashmi.a@intel.com>
Precedence: bulk

On 30-07-21, 12:03, rashmi.a@intel.com wrote:

> diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
> index ac42bb2fb394..18a3cc5b98c0 100644
> --- a/drivers/phy/intel/Kconfig
> +++ b/drivers/phy/intel/Kconfig
> @@ -46,3 +46,13 @@ config PHY_INTEL_LGM_EMMC
>  	select GENERIC_PHY
>  	help
>  	  Enable this to support the Intel EMMC PHY
> +
> +config PHY_INTEL_THUNDERBAY_EMMC

Alphabetical sort please

> +        tristate "Intel Thunder Bay eMMC PHY driver"
> +        depends on OF && (ARCH_THUNDERBAY || COMPILE_TEST)
> +        select GENERIC_PHY
> +        help
> +	  This option enables support for Intel Thunder Bay SoC eMMC PHY.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called phy-intel-thunderbay-emmc.ko.
> diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
> index 14550981a707..6a4db3ee7393 100644
> --- a/drivers/phy/intel/Makefile
> +++ b/drivers/phy/intel/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC)	+= phy-intel-keembay-emmc.o
> +obj-$(CONFIG_PHY_INTEL_THUNDERBAY_EMMC)	+= phy-intel-thunderbay-emmc.o

here as well

> +static int thunderbay_emmc_phy_power(struct phy *phy, bool power_on)
> +{
> +	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
> +	unsigned int freqsel = FREQSEL_200M_170M;
> +	unsigned long rate;
> +	static int lock;
> +	u32 val;
> +	int ret;
> +
> +	/* Disable DLL */
> +	rate = clk_get_rate(tbh_phy->emmcclk);
> +	switch (rate) {
> +	case 200000000:
> +	/* lock dll only when it is used, i.e only if SEL_DLY_TXCLK/RXCLK are 0 */
> +		update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x0);

pls keep the same indent for comment and code!

> +		break;
> +	/* dll lock not required for other frequencies */
> +	case 50000000 ... 52000000:
> +	case 400000:
> +	default:
> +		break;
> +	}
> +
> +	if (!power_on)
> +		return 0;

should this not be the first thing you check...

> +
> +	rate = clk_get_rate(tbh_phy->emmcclk);
> +	switch (rate) {
> +	case 170000001 ... 200000000:
> +		freqsel = FREQSEL_200M_170M;
> +		break;
> +	case 140000001 ... 170000000:
> +		freqsel = FREQSEL_170M_140M;
> +		break;
> +	case 110000001 ... 140000000:
> +		freqsel = FREQSEL_140M_110M;
> +		break;
> +	case 80000001 ... 110000000:
> +		freqsel = FREQSEL_110M_80M;
> +		break;
> +	case 50000000 ... 80000000:
> +		freqsel = FREQSEL_80M_50M;
> +		break;
> +	case 250000001 ... 275000000:
> +		freqsel = FREQSEL_275M_250M;
> +		break;
> +	case 225000001 ... 250000000:
> +		freqsel = FREQSEL_250M_225M;
> +		break;
> +	case 200000001 ... 225000000:
> +		freqsel = FREQSEL_225M_200M;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (rate > 200000000)
> +	/* only the upper limit is considered as the clock rate may fall low during init */
> +		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);

here as well! (checkpatch --strict should have told you so)

> +static int thunderbay_emmc_phy_power_on(struct phy *phy)
> +{
> +	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
> +	unsigned long rate;
> +
> +	/* Overwrite capability bits configurable in bootloader */
> +	update_reg(tbh_phy, CTRL_CFG_0,
> +		   SUPPORT_HS_MASK, SUPPORT_HS_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_0,
> +		   SUPPORT_8B_MASK, SUPPORT_8B_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_1,
> +		   SUPPORT_SDR50_MASK, SUPPORT_SDR50_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_1,
> +		   SUPPORT_DDR50_MASK, SUPPORT_DDR50_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_1,
> +		   SUPPORT_SDR104_MASK, SUPPORT_SDR104_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_1,
> +		   SUPPORT_HS400_MASK, SUPPORT_HS400_SHIFT, 0x1);
> +	update_reg(tbh_phy, CTRL_CFG_1,
> +		   SUPPORT_64B_MASK, SUPPORT_64B_SHIFT, 0x1);
> +
> +	if (tbh_phy->phy_power_sts == PHY_UNINITIALIZED) {
> +	/* Indicates initialization, so settings to be done for init , same as 400KHZ setting */
> +		update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, SEL_DLY_TXCLK_SHIFT, 0x1);

inconsistent indent here too!

> +		update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, SEL_DLY_RXCLK_SHIFT, 0x1);
> +		update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, ITAP_DLY_ENA_SHIFT, 0x0);
> +		update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, ITAP_DLY_SEL_SHIFT, 0x0);
> +		update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, OTAP_DLY_ENA_SHIFT, 0x0);
> +		update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, OTAP_DLY_SEL_SHIFT, 0);
> +		update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, DLL_TRIM_ICP_SHIFT, 0);
> +		update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
> +
> +	} else if (tbh_phy->phy_power_sts == PHY_INITIALIZED) {
> +		/* Indicates actual clock setting */
> +		rate = clk_get_rate(tbh_phy->emmcclk);
> +		switch (rate) {
> +		case 200000000:
> +			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
> +				   SEL_DLY_TXCLK_SHIFT, 0x0);
> +			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
> +				   SEL_DLY_RXCLK_SHIFT, 0x0);
> +			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
> +				   ITAP_DLY_ENA_SHIFT, 0x0);
> +			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
> +				   ITAP_DLY_SEL_SHIFT, 0x0);
> +			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
> +				   OTAP_DLY_ENA_SHIFT, 0x1);
> +			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
> +				   OTAP_DLY_SEL_SHIFT, 2);
> +			update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
> +				   DLL_TRIM_ICP_SHIFT, 0x8);
> +			update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
> +				   DR_TY_SHIFT, 0x1);
> +			/* For HS400 only */
> +			update_reg(tbh_phy, PHY_CFG_2, SEL_STRB_MASK,
> +				   SEL_STRB_SHIFT, STRB);
> +			break;

pls give a empty line after break, helps to read the code

-- 
~Vinod