Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Clark <robdclark@gmail.com>
To:     dri-devel@lists.freedesktop.org
Cc:     linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Stephen Boyd <swboyd@chromium.org>,
        Douglas Anderson <dianders@chromium.org>,
        Rob Clark <robdclark@chromium.org>,
        Andrzej Hajda <a.hajda@samsung.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Robert Foss <robert.foss@linaro.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        David Airlie <airlied@linux.ie>,
        Daniel Vetter <daniel@ffwll.ch>,
        linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 4/4] drm/bridge: ti-sn65dsi86: Add NO_CONNECTOR support
Date:   Wed, 11 Aug 2021 16:52:50 -0700
Message-Id: <20210811235253.924867-5-robdclark@gmail.com>
In-Reply-To: <20210811235253.924867-1-robdclark@gmail.com>
References: <20210811235253.924867-1-robdclark@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Rob Clark <robdclark@chromium.org>

Slightly awkward to fish out the display_info when we aren't creating
own connector.  But I don't see an obvious better way.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 34 +++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 38dcc49eccaf..dc8112bab3d3 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -693,9 +693,11 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
 		return ret;
 	}
 
-	ret = ti_sn_bridge_connector_init(pdata);
-	if (ret < 0)
-		goto err_conn_init;
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
+		ret = ti_sn_bridge_connector_init(pdata);
+		if (ret < 0)
+			goto err_conn_init;
+	}
 
 	/*
 	 * TODO: ideally finding host resource and dsi dev registration needs
@@ -757,7 +759,8 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
 err_dsi_attach:
 	mipi_dsi_device_unregister(dsi);
 err_dsi_host:
-	drm_connector_cleanup(&pdata->connector);
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
+		drm_connector_cleanup(&pdata->connector);
 err_conn_init:
 	drm_dp_aux_unregister(&pdata->aux);
 	return ret;
@@ -806,9 +809,30 @@ static void ti_sn_bridge_set_dsi_rate(struct ti_sn65dsi86 *pdata)
 	regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val);
 }
 
+/*
+ * Find the connector and fish out the bpc from display_info.  It would
+ * be nice if we could get this instead from drm_bridge_state, but that
+ * doesn't yet appear to be the case.
+ */
 static unsigned int ti_sn_bridge_get_bpp(struct ti_sn65dsi86 *pdata)
 {
-	if (pdata->connector.display_info.bpc <= 6)
+	struct drm_bridge *bridge = &pdata->bridge;
+	struct drm_connector_list_iter conn_iter;
+	struct drm_connector *connector;
+	unsigned bpc = 0;
+
+	drm_connector_list_iter_begin(bridge->dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		if (drm_connector_has_possible_encoder(connector, bridge->encoder)) {
+			bpc = connector->display_info.bpc;
+			break;
+		}
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	WARN_ON(bpc == 0);
+
+	if (bpc <= 6)
 		return 18;
 	else
 		return 24;
-- 
2.31.1