Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: rnayak=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 460E8C43148
From:   Rajendra Nayak <rnayak@codeaurora.org>
To:     ulf.hansson@linaro.org, bjorn.andersson@linaro.org,
        viresh.kumar@linaro.org
Cc:     linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        swboyd@chromium.org, rojay@codeaurora.org, stephan@gerhold.net,
        digetx@gmail.com, Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v7 3/3] arm64: dts: sc7180: Add required-opps for i2c
Date:   Thu, 12 Aug 2021 16:57:22 +0530
Message-Id: <1628767642-4008-4-git-send-email-rnayak@codeaurora.org>
In-Reply-To: <1628767642-4008-1-git-send-email-rnayak@codeaurora.org>
References: <1628767642-4008-1-git-send-email-rnayak@codeaurora.org>
Precedence: bulk

qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
requirement.

Use 'required-opps' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 4721c15..c8921e2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -790,8 +790,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi0: spi@880000 {
@@ -842,8 +844,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi1: spi@884000 {
@@ -894,8 +898,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart2: serial@888000 {
@@ -928,8 +934,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi3: spi@88c000 {
@@ -980,8 +988,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart4: serial@890000 {
@@ -1014,8 +1024,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi5: spi@894000 {
@@ -1079,8 +1091,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi6: spi@a80000 {
@@ -1131,8 +1145,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart7: serial@a84000 {
@@ -1165,8 +1181,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi8: spi@a88000 {
@@ -1217,8 +1235,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart9: serial@a8c000 {
@@ -1251,8 +1271,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi10: spi@a90000 {
@@ -1303,8 +1325,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi11: spi@a94000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation