Received: by 2002:a05:6a10:8a4d:0:0:0:0 with SMTP id dn13csp1086370pxb; Fri, 13 Aug 2021 13:12:33 -0700 (PDT) X-Google-Smtp-Source: ABdhPJystSS7JKnW1T7BAoDTVr2K0A6+Qv37kQu0j/pCDU6sOEgd49hHa1eGUrRKlSpHAAVgEcoR X-Received: by 2002:a05:6402:c9:: with SMTP id i9mr3424567edu.76.1628885552821; Fri, 13 Aug 2021 13:12:32 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1628885552; cv=none; d=google.com; s=arc-20160816; b=pWi4xUJoZVLzVUmhvhGzJCfOp83d0R1fps4yPyDnd5JLjbBHXJfcqXyMoSUrDolD2N 8F68VDADJoCnNoDyDUpfBauVUhPYvkH0us9TxI/IF9er/QIbNaQPYs1FBV2FT0LVRdzx 4m6s6BKzO3D4A7KRBXFq9K87kLY9chfRnGYum4JO0hf9EOQGfiIASwWfFOzizdBaiXn+ Cl4ewNByKrhNtIINd++43hiLr6j7kew7Fi2XE9wzpbmIQppuR/eMCprZoFmHdJGLS+fh Zi7cXeTNA0PzkyujusaSwAwiCzpm9SAihwiUlZlMne9rB+ReU9rfrzZgTxqDKTVh2scy Wd5Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:in-reply-to:content-transfer-encoding :content-disposition:mime-version:references:message-id:subject:cc :to:from:date; bh=Xe54MzSacQ2XLnZO+Xg041W937+I2QFjhCqO6U5DWwQ=; b=XY16inPzDGNqad2P3bq1/jBkjyhPNo1+JKjcDg2Yibdu49+Xu9rhJFeYquN1Uce74H 0it4gZQjzpTG6zXlvcm0KB0JTC8jcNlX0YqhIQw5ZCACTUj/xSaZxfYCiHKx+/RCUDdA D4ilIZsAJarDrv0KC6HncDpPYiH111W581eEELN5T0JtFm54aTlL05IBV0RdzSlLT3aO 2aZXXadbaXGPrR/ifNpud18LyrBm1bAkyHEEP/9ZbhsGdGzVAomgnEHLiTiTWYqwwdKj TiuzNYRyjL3dyMhUQGXhGto8pJ2QtupN+JVcMHOa+NcCIhQsTVkx2tZ3jrTRVFJTmU6M GG3A== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id 5si2721393ejl.332.2021.08.13.13.12.08; Fri, 13 Aug 2021 13:12:32 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233890AbhHMUKL (ORCPT + 99 others); Fri, 13 Aug 2021 16:10:11 -0400 Received: from mail-ot1-f45.google.com ([209.85.210.45]:44705 "EHLO mail-ot1-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230440AbhHMUJx (ORCPT ); Fri, 13 Aug 2021 16:09:53 -0400 Received: by mail-ot1-f45.google.com with SMTP id l36-20020a0568302b24b0290517526ce5e3so5956419otv.11; Fri, 13 Aug 2021 13:09:26 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:content-transfer-encoding :in-reply-to; bh=Xe54MzSacQ2XLnZO+Xg041W937+I2QFjhCqO6U5DWwQ=; b=NBgTF35OmVr7x6tUxa9DMWmY7GGGDpW2veMSDsy6ocuqBa/jhhC4ig9aYIFXCs8od2 TQfK2uLqiDIZDinV6MaRptXmS+nILS8wGCPjyJhVMgoFA+ZeaBEEgC59KfAq9mWpmt0z yOSavCx8WO/mCPrCjV/DydTbjlnLq7OvWj3Plj4/g7vmkRfWiYklPoRqWbv22KY9EMly Zkp0kDglamOzqhi7aBvagidM/MeXOZ0cv6b/nwhICeYJ0Jfo9uRIdT2cOaKGp6GxRJeh MP3oYoQNwaRvwMauPEMaCVeJ3ZYnktW9gAQ6GhO+pnysHIuscwa0R5fPjVtuXnkztrSC Fvmw== X-Gm-Message-State: AOAM532t2IOynDUw9dImBA1NTXA17LEon8jIWe0QLiWJgvpZS27Ucqvw t1Q3G3MYMejDgUiz1zC9+Q== X-Received: by 2002:a9d:7653:: with SMTP id o19mr3522967otl.236.1628885365884; Fri, 13 Aug 2021 13:09:25 -0700 (PDT) Received: from robh.at.kernel.org (2603-8080-2a06-ed00-7254-0b80-dd3c-00c6.res6.spectrum.com. [2603:8080:2a06:ed00:7254:b80:dd3c:c6]) by smtp.gmail.com with ESMTPSA id i15sm438710oov.33.2021.08.13.13.09.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 13 Aug 2021 13:09:24 -0700 (PDT) Received: (nullmailer pid 3939741 invoked by uid 1000); Fri, 13 Aug 2021 20:09:23 -0000 Date: Fri, 13 Aug 2021 15:09:23 -0500 From: Rob Herring To: Michal Simek Cc: linux-kernel@vger.kernel.org, monstr@monstr.eu, git@xilinx.com, Viresh Kumar , Geert Uytterhoeven , Krzysztof Kozlowski , Michael Walle , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v3 2/2] arm64: zynqmp: Add support for Xilinx Kria SOM board Message-ID: References: MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Aug 06, 2021 at 12:12:08PM +0200, Michal Simek wrote: > There are couple of revisions of SOMs (k26) and associated carrier cards > (kv260). > SOM itself has two major versions: > sm-k26 - SOM with EMMC > smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware > in QSPI. > > SOMs are describing only devices available on the SOM or connections which > are described in specification (for example UART, fwuen). > > Signed-off-by: Michal Simek > --- > > Changes in v3: > - Fix led node name > - Fix compatible string for xlnx,zynqmp-sk-kv260-revA/Y/Z > - Fix headers alignment > - Move USB3 PHY properties from DWC3 node to USB node - reported by Manish > Narani > - Change dtb names generated with dtbo > - Fix emmc comment style > - > > Changes in v2: > - Use sugar syntax - reported by Geert > - Update copyright years > - Fix SD3.0 comment alignment > - Remove one newline from Makefile > > https://www.xilinx.com/products/som/kria.html > --- > .../devicetree/bindings/arm/xilinx.yaml | 31 ++ > arch/arm64/boot/dts/xilinx/Makefile | 13 + > .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts | 335 ++++++++++++++++++ > .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts | 318 +++++++++++++++++ > .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 289 +++++++++++++++ > .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts | 21 ++ > 6 files changed, 1007 insertions(+) > create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts > create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts > create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts > > diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml > index a0b1ae6e3e71..31b86a6363b8 100644 > --- a/Documentation/devicetree/bindings/arm/xilinx.yaml > +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml > @@ -116,6 +116,37 @@ properties: > - const: xlnx,zynqmp-zcu111 > - const: xlnx,zynqmp > > + - description: Xilinx Kria SOMs > + items: > + - const: xlnx,zynqmp-sm-k26-rev1 > + - const: xlnx,zynqmp-sm-k26-revB > + - const: xlnx,zynqmp-sm-k26-revA > + - const: xlnx,zynqmp-sm-k26 How is having all 4 strings useful? Seems like it should be only 1 of the rev's at a time. > + - const: xlnx,zynqmp > + > + - description: Xilinx Kria SOMs (starter) > + items: > + - const: xlnx,zynqmp-smk-k26-rev1 > + - const: xlnx,zynqmp-smk-k26-revB > + - const: xlnx,zynqmp-smk-k26-revA > + - const: xlnx,zynqmp-smk-k26 > + - const: xlnx,zynqmp > + > + - description: Xilinx Kria Carrier Cards (revA/Y/Z) > + items: > + - const: xlnx,zynqmp-sk-kv260-revA > + - const: xlnx,zynqmp-sk-kv260-revY > + - const: xlnx,zynqmp-sk-kv260-revZ > + - const: xlnx,zynqmp-sk-k260 > + - const: xlnx,zynqmp > + > + - description: Xilinx Kria Carrier Cards (rev1/B) > + items: > + - const: xlnx,zynqmp-sk-kv260-rev1 > + - const: xlnx,zynqmp-sk-kv260-revB > + - const: xlnx,zynqmp-sk-k260 > + - const: xlnx,zynqmp > + > additionalProperties: true > > ... > diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile > index 083ed52337fd..4e159540d031 100644 > --- a/arch/arm64/boot/dts/xilinx/Makefile > +++ b/arch/arm64/boot/dts/xilinx/Makefile > @@ -17,3 +17,16 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb > dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb > dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb > dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb > + > +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb > +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb > + > +sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo > +sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo > +smk-k26-revA-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo > +smk-k26-revA-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo > + > +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revA.dtb > +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revB.dtb > +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revA.dtb > +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revB.dtb > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts > new file mode 100644 > index 000000000000..22602d8c33f8 > --- /dev/null > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts > @@ -0,0 +1,335 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * dts file for KV260 revA Carrier Card > + * > + * (C) Copyright 2020 - 2021, Xilinx, Inc. > + * > + * SD level shifter: > + * "A" – A01 board un-modified (NXP) > + * "Y" – A01 board modified with legacy interposer (Nexperia) > + * "Z" – A01 board modified with Diode interposer > + * > + * Michal Simek > + */ > + > +#include > +#include > +#include > +#include > + > +/dts-v1/; > +/plugin/; > + > +&{/} { > + compatible = "xlnx,zynqmp-sk-kv260-revA", > + "xlnx,zynqmp-sk-kv260-revY", > + "xlnx,zynqmp-sk-kv260-revZ", > + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; > +}; > + > +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1_default>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; > + > + u14: ina260@40 { /* u14 */ > + compatible = "ti,ina260"; > + #io-channel-cells = <1>; > + label = "ina260-u14"; > + reg = <0x40>; > + }; > + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ > +}; > + > +&amba { > + ina260-u14 { > + compatible = "iio-hwmon"; > + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; > + }; > + > + si5332_0: si5332_0 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > + > + si5332_1: si5332_1 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + }; > + > + si5332_2: si5332_2 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <48000000>; > + }; > + > + si5332_3: si5332_3 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + }; > + > + si5332_4: si5332_4 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <26000000>; > + }; > + > + si5332_5: si5332_5 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <27000000>; > + }; > +}; > + > +/* DP/USB 3.0 and SATA */ > +&psgtr { > + status = "okay"; > + /* pcie, usb3, sata */ > + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; > + clock-names = "ref0", "ref1", "ref2"; > +}; > + > +&sata { > + status = "okay"; > + /* SATA OOB timing settings */ > + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; > + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; > + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; > + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; > + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; > + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; > + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; > + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; > + phy-names = "sata-phy"; > + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; > +}; > + > +&zynqmp_dpsub { > + status = "disabled"; > + phy-names = "dp-phy0", "dp-phy1"; > + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; > +}; > + > +&zynqmp_dpdma { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > + usbhub: usb5744 { /* u43 */ > + compatible = "microchip,usb5744"; > + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&dwc3_0 { > + status = "okay"; > + dr_mode = "host"; > + snps,usb3_lpm_capable; > + maximum-speed = "super-speed"; > +}; > + > +&sdhci1 { /* on CC with tuned parameters */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdhci1_default>; > + /* > + * SD 3.0 requires level shifter and this property > + * should be removed if the board has level shifter and > + * need to work in UHS mode > + */ > + no-1-8-v; > + disable-wp; > + xlnx,mio-bank = <1>; > +}; > + > +&gem3 { /* required by spec */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gem3_default>; > + phy-handle = <&phy0>; > + phy-mode = "rgmii-id"; > + > + mdio: mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; > + reset-delay-us = <2>; > + > + phy0: ethernet-phy@1 { > + #phy-cells = <1>; > + reg = <1>; > + ti,rx-internal-delay = ; > + ti,tx-internal-delay = ; > + ti,fifo-depth = ; > + ti,dp83867-rxctrl-strap-quirk; > + }; > + }; > +}; > + > +&pinctrl0 { /* required by spec */ > + status = "okay"; > + > + pinctrl_uart1_default: uart1-default { > + conf { > + groups = "uart1_9_grp"; > + slew-rate = ; > + power-source = ; > + drive-strength = <12>; > + }; > + > + conf-rx { > + pins = "MIO37"; > + bias-high-impedance; > + }; > + > + conf-tx { > + pins = "MIO36"; > + bias-disable; > + }; > + > + mux { > + groups = "uart1_9_grp"; > + function = "uart1"; > + }; > + }; > + > + pinctrl_i2c1_default: i2c1-default { > + conf { > + groups = "i2c1_6_grp"; > + bias-pull-up; > + slew-rate = ; > + power-source = ; > + }; > + > + mux { > + groups = "i2c1_6_grp"; > + function = "i2c1"; > + }; > + }; > + > + pinctrl_i2c1_gpio: i2c1-gpio { > + conf { > + groups = "gpio0_24_grp", "gpio0_25_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + mux { > + groups = "gpio0_24_grp", "gpio0_25_grp"; > + function = "gpio0"; > + }; > + }; > + > + pinctrl_gem3_default: gem3-default { > + conf { > + groups = "ethernet3_0_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + conf-rx { > + pins = "MIO70", "MIO72", "MIO74"; > + bias-high-impedance; > + low-power-disable; > + }; > + > + conf-bootstrap { > + pins = "MIO71", "MIO73", "MIO75"; > + bias-disable; > + low-power-disable; > + }; > + > + conf-tx { > + pins = "MIO64", "MIO65", "MIO66", > + "MIO67", "MIO68", "MIO69"; > + bias-disable; > + low-power-enable; > + }; > + > + conf-mdio { > + groups = "mdio3_0_grp"; > + slew-rate = ; > + power-source = ; > + bias-disable; > + }; > + > + mux-mdio { > + function = "mdio3"; > + groups = "mdio3_0_grp"; > + }; > + > + mux { > + function = "ethernet3"; > + groups = "ethernet3_0_grp"; > + }; > + }; > + > + pinctrl_usb0_default: usb0-default { > + conf { > + groups = "usb0_0_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + conf-rx { > + pins = "MIO52", "MIO53", "MIO55"; > + bias-high-impedance; > + }; > + > + conf-tx { > + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", > + "MIO60", "MIO61", "MIO62", "MIO63"; > + bias-disable; > + }; > + > + mux { > + groups = "usb0_0_grp"; > + function = "usb0"; > + }; > + }; > + > + pinctrl_sdhci1_default: sdhci1-default { > + conf { > + groups = "sdio1_0_grp"; > + slew-rate = ; > + power-source = ; > + bias-disable; > + }; > + > + conf-cd { > + groups = "sdio1_cd_0_grp"; > + bias-high-impedance; > + bias-pull-up; > + slew-rate = ; > + power-source = ; > + }; > + > + mux-cd { > + groups = "sdio1_cd_0_grp"; > + function = "sdio1_cd"; > + }; > + > + mux { > + groups = "sdio1_0_grp"; > + function = "sdio1"; > + }; > + }; > +}; > + > +&uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_default>; > +}; > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts > new file mode 100644 > index 000000000000..df054e152a77 > --- /dev/null > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts > @@ -0,0 +1,318 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * dts file for KV260 revA Carrier Card > + * > + * (C) Copyright 2020 - 2021, Xilinx, Inc. > + * > + * Michal Simek > + */ > + > +#include > +#include > +#include > +#include > + > +/dts-v1/; > +/plugin/; > + > +&{/} { > + compatible = "xlnx,zynqmp-sk-kv260-rev1", > + "xlnx,zynqmp-sk-kv260-revB", > + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; I don't think changing the root compatible in an overlay is a good policy. Do you need this all to be overlays? > +}; > + > +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1_default>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; > + > + u14: ina260@40 { /* u14 */ > + compatible = "ti,ina260"; Not documented. Please run 'make dtbs_check' and don't add new warnings. > + #io-channel-cells = <1>; > + label = "ina260-u14"; > + reg = <0x40>; > + }; > + usbhub: usb5744@2d { /* u43 */ > + compatible = "microchip,usb5744"; Not documented. > + reg = <0x2d>; > + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; > + }; > + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ > +}; > + > +&amba { > + ina260-u14 { > + compatible = "iio-hwmon"; > + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; > + }; > + > + si5332_0: si5332_0 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > + > + si5332_1: si5332_1 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + }; > + > + si5332_2: si5332_2 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <48000000>; > + }; > + > + si5332_3: si5332_3 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + }; > + > + si5332_4: si5332_4 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <26000000>; > + }; > + > + si5332_5: si5332_5 { /* u17 */ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <27000000>; > + }; > +}; > + > +/* DP/USB 3.0 */ > +&psgtr { > + status = "okay"; > + /* pcie, usb3, sata */ > + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; > + clock-names = "ref0", "ref1", "ref2"; > +}; > + > +&zynqmp_dpsub { > + status = "disabled"; > + phy-names = "dp-phy0", "dp-phy1"; > + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; > +}; > + > +&zynqmp_dpdma { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > +}; > + > +&dwc3_0 { > + status = "okay"; > + dr_mode = "host"; > + snps,usb3_lpm_capable; > + maximum-speed = "super-speed"; > +}; > + > +&sdhci1 { /* on CC with tuned parameters */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sdhci1_default>; > + /* > + * SD 3.0 requires level shifter and this property > + * should be removed if the board has level shifter and > + * need to work in UHS mode > + */ > + no-1-8-v; > + disable-wp; > + xlnx,mio-bank = <1>; > + clk-phase-sd-hs = <126>, <60>; > + clk-phase-uhs-sdr25 = <120>, <60>; > + clk-phase-uhs-ddr50 = <126>, <48>; > +}; > + > +&gem3 { /* required by spec */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gem3_default>; > + phy-handle = <&phy0>; > + phy-mode = "rgmii-id"; > + > + mdio: mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; > + reset-delay-us = <2>; > + > + phy0: ethernet-phy@1 { > + #phy-cells = <1>; > + reg = <1>; > + ti,rx-internal-delay = ; > + ti,tx-internal-delay = ; > + ti,fifo-depth = ; > + ti,dp83867-rxctrl-strap-quirk; > + }; > + }; > +}; > + > +&pinctrl0 { /* required by spec */ > + status = "okay"; > + > + pinctrl_uart1_default: uart1-default { > + conf { > + groups = "uart1_9_grp"; > + slew-rate = ; > + power-source = ; > + drive-strength = <12>; > + }; > + > + conf-rx { > + pins = "MIO37"; > + bias-high-impedance; > + }; > + > + conf-tx { > + pins = "MIO36"; > + bias-disable; > + }; > + > + mux { > + groups = "uart1_9_grp"; > + function = "uart1"; > + }; > + }; > + > + pinctrl_i2c1_default: i2c1-default { > + conf { > + groups = "i2c1_6_grp"; > + bias-pull-up; > + slew-rate = ; > + power-source = ; > + }; > + > + mux { > + groups = "i2c1_6_grp"; > + function = "i2c1"; > + }; > + }; > + > + pinctrl_i2c1_gpio: i2c1-gpio { > + conf { > + groups = "gpio0_24_grp", "gpio0_25_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + mux { > + groups = "gpio0_24_grp", "gpio0_25_grp"; > + function = "gpio0"; > + }; > + }; > + > + pinctrl_gem3_default: gem3-default { > + conf { > + groups = "ethernet3_0_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + conf-rx { > + pins = "MIO70", "MIO72", "MIO74"; > + bias-high-impedance; > + low-power-disable; > + }; > + > + conf-bootstrap { > + pins = "MIO71", "MIO73", "MIO75"; > + bias-disable; > + low-power-disable; > + }; > + > + conf-tx { > + pins = "MIO64", "MIO65", "MIO66", > + "MIO67", "MIO68", "MIO69"; > + bias-disable; > + low-power-enable; > + }; > + > + conf-mdio { > + groups = "mdio3_0_grp"; > + slew-rate = ; > + power-source = ; > + bias-disable; > + }; > + > + mux-mdio { > + function = "mdio3"; > + groups = "mdio3_0_grp"; > + }; > + > + mux { > + function = "ethernet3"; > + groups = "ethernet3_0_grp"; > + }; > + }; > + > + pinctrl_usb0_default: usb0-default { > + conf { > + groups = "usb0_0_grp"; > + slew-rate = ; > + power-source = ; > + }; > + > + conf-rx { > + pins = "MIO52", "MIO53", "MIO55"; > + bias-high-impedance; > + }; > + > + conf-tx { > + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", > + "MIO60", "MIO61", "MIO62", "MIO63"; > + bias-disable; > + }; > + > + mux { > + groups = "usb0_0_grp"; > + function = "usb0"; > + }; > + }; > + > + pinctrl_sdhci1_default: sdhci1-default { > + conf { > + groups = "sdio1_0_grp"; > + slew-rate = ; > + power-source = ; > + bias-disable; > + }; > + > + conf-cd { > + groups = "sdio1_cd_0_grp"; > + bias-high-impedance; > + bias-pull-up; > + slew-rate = ; > + power-source = ; > + }; > + > + mux-cd { > + groups = "sdio1_cd_0_grp"; > + function = "sdio1_cd"; > + }; > + > + mux { > + groups = "sdio1_0_grp"; > + function = "sdio1"; > + }; > + }; > +}; > + > +&uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_default>; > +}; > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > new file mode 100644 > index 000000000000..550b389153e6 > --- /dev/null > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts > @@ -0,0 +1,289 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * dts file for Xilinx ZynqMP SM-K26 rev1/B/A > + * > + * (C) Copyright 2020 - 2021, Xilinx, Inc. > + * > + * Michal Simek > + */ > + > +/dts-v1/; > + > +#include "zynqmp.dtsi" > +#include "zynqmp-clk-ccf.dtsi" > +#include > +#include > +#include > + > +/ { > + model = "ZynqMP SM-K26 Rev1/B/A"; > + compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", > + "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26", > + "xlnx,zynqmp"; > + > + aliases { > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + mmc0 = &sdhci0; > + mmc1 = &sdhci1; > + nvmem0 = &eeprom; > + nvmem1 = &eeprom_cc; > + rtc0 = &rtc; > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &dcc; > + spi0 = &qspi; > + spi1 = &spi0; > + spi2 = &spi1; > + usb0 = &usb0; > + usb1 = &usb1; > + }; > + > + chosen { > + bootargs = "earlycon"; > + stdout-path = "serial1:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; /* 4GB */ > + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + fwuen { > + label = "fwuen"; > + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + ds35-led { > + label = "heartbeat"; > + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + ds36-led { > + label = "vbus_det"; > + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > +}; > + > +&uart1 { /* MIO36/MIO37 */ > + status = "okay"; > +}; > + > +&qspi { /* MIO 0-5 - U143 */ > + status = "okay"; > + flash@0 { /* MT25QU512A */ > + compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + spi-tx-bus-width = <1>; > + spi-rx-bus-width = <4>; > + spi-max-frequency = <40000000>; /* 40MHz */ > + partition@0 { > + label = "Image Selector"; > + reg = <0x0 0x80000>; /* 512KB */ > + read-only; > + lock; > + }; > + partition@80000 { > + label = "Image Selector Golden"; > + reg = <0x80000 0x80000>; /* 512KB */ > + read-only; > + lock; > + }; > + partition@100000 { > + label = "Persistent Register"; > + reg = <0x100000 0x20000>; /* 128KB */ > + }; > + partition@120000 { > + label = "Persistent Register Backup"; > + reg = <0x120000 0x20000>; /* 128KB */ > + }; > + partition@140000 { > + label = "Open_1"; > + reg = <0x140000 0xC0000>; /* 768KB */ > + }; > + partition@200000 { > + label = "Image A (FSBL, PMU, ATF, U-Boot)"; > + reg = <0x200000 0xD00000>; /* 13MB */ > + }; > + partition@f00000 { > + label = "ImgSel Image A Catch"; > + reg = <0xF00000 0x80000>; /* 512KB */ > + read-only; > + lock; > + }; > + partition@f80000 { > + label = "Image B (FSBL, PMU, ATF, U-Boot)"; > + reg = <0xF80000 0xD00000>; /* 13MB */ > + }; > + partition@1c80000 { > + label = "ImgSel Image B Catch"; > + reg = <0x1C80000 0x80000>; /* 512KB */ > + read-only; > + lock; > + }; > + partition@1d00000 { > + label = "Open_2"; > + reg = <0x1D00000 0x100000>; /* 1MB */ > + }; > + partition@1e00000 { > + label = "Recovery Image"; > + reg = <0x1E00000 0x200000>; /* 2MB */ > + read-only; > + lock; > + }; > + partition@2000000 { > + label = "Recovery Image Backup"; > + reg = <0x2000000 0x200000>; /* 2MB */ > + read-only; > + lock; > + }; > + partition@2200000 { > + label = "U-Boot storage variables"; > + reg = <0x2200000 0x20000>; /* 128KB */ > + }; > + partition@2220000 { > + label = "U-Boot storage variables backup"; > + reg = <0x2220000 0x20000>; /* 128KB */ > + }; > + partition@2240000 { > + label = "SHA256"; > + reg = <0x2240000 0x10000>; /* 256B but 64KB sector */ > + read-only; > + lock; > + }; > + partition@2250000 { > + label = "User"; > + reg = <0x2250000 0x1db0000>; /* 29.5 MB */ > + }; > + }; > +}; > + > +&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ > + status = "okay"; > + non-removable; > + disable-wp; > + bus-width = <8>; > + xlnx,mio-bank = <0>; > +}; > + > +&spi1 { /* MIO6, 9-11 */ > + status = "okay"; > + label = "TPM"; > + num-cs = <1>; > + tpm@0 { /* slm9670 - U144 */ > + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; > + reg = <0>; > + spi-max-frequency = <18500000>; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + clock-frequency = <400000>; > + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; > + > + eeprom: eeprom@50 { /* u46 - also at address 0x58 */ > + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ > + reg = <0x50>; > + /* WP pin EE_WP_EN connected to slg7x644092@68 */ > + }; > + > + eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ > + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ > + reg = <0x51>; > + }; > + > + /* da9062@30 - u170 - also at address 0x31 */ > + /* da9131@33 - u167 */ > + da9131: pmic@33 { > + compatible = "dlg,da9131"; > + reg = <0x33>; > + regulators { > + da9131_buck1: buck1 { > + regulator-name = "da9131_buck1"; > + regulator-boot-on; > + regulator-always-on; > + }; > + da9131_buck2: buck2 { > + regulator-name = "da9131_buck2"; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > + /* da9130@32 - u166 */ > + da9130: pmic@32 { > + compatible = "dlg,da9130"; > + reg = <0x32>; > + regulators { > + da9130_buck1: buck1 { > + regulator-name = "da9130_buck1"; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > + /* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */ > + /* > + * stdp4320 - u27 FW has below two issues to be fixed in next board revision. > + * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76. > + * Address conflict with slg7x644091@70 making both the devices NOT accessible. > + * With the FW fix, stdp4320 should respond to address 0x73 only. > + */ > + /* slg7x644092@68 - u169 */ > + /* Also connected via JA1C as C23/C24 */ > +}; > + > +&gpio { > + status = "okay"; > + gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */ > + "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */ > + "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ > + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ > + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */ > + "I2C1_SDA", "", "", "", "", /* 25 - 29 */ > + "", "", "", "", "", /* 30 - 34 */ > + "", "", "", "", "", /* 35 - 39 */ > + "", "", "", "", "", /* 40 - 44 */ > + "", "", "", "", "", /* 45 - 49 */ > + "", "", "", "", "", /* 50 - 54 */ > + "", "", "", "", "", /* 55 - 59 */ > + "", "", "", "", "", /* 60 - 64 */ > + "", "", "", "", "", /* 65 - 69 */ > + "", "", "", "", "", /* 70 - 74 */ > + "", "", "", /* 75 - 77, MIO end and EMIO start */ > + "", "", /* 78 - 79 */ > + "", "", "", "", "", /* 80 - 84 */ > + "", "", "", "", "", /* 85 - 89 */ > + "", "", "", "", "", /* 90 - 94 */ > + "", "", "", "", "", /* 95 - 99 */ > + "", "", "", "", "", /* 100 - 104 */ > + "", "", "", "", "", /* 105 - 109 */ > + "", "", "", "", "", /* 110 - 114 */ > + "", "", "", "", "", /* 115 - 119 */ > + "", "", "", "", "", /* 120 - 124 */ > + "", "", "", "", "", /* 125 - 129 */ > + "", "", "", "", "", /* 130 - 134 */ > + "", "", "", "", "", /* 135 - 139 */ > + "", "", "", "", "", /* 140 - 144 */ > + "", "", "", "", "", /* 145 - 149 */ > + "", "", "", "", "", /* 150 - 154 */ > + "", "", "", "", "", /* 155 - 159 */ > + "", "", "", "", "", /* 160 - 164 */ > + "", "", "", "", "", /* 165 - 169 */ > + "", "", "", ""; /* 170 - 174 */ > +}; > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts > new file mode 100644 > index 000000000000..c70966c1f344 > --- /dev/null > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts > @@ -0,0 +1,21 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A > + * > + * (C) Copyright 2020 - 2021, Xilinx, Inc. > + * > + * Michal Simek > + */ > + > +#include "zynqmp-sm-k26-revA.dts" > + > +/ { > + model = "ZynqMP SMK-K26 Rev1/B/A"; > + compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB", > + "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26", > + "xlnx,zynqmp"; > +}; > + > +&sdhci0 { > + status = "disabled"; > +}; > -- > 2.32.0 > >