Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: pmaliset=codeaurora.org@mg.codeaurora.org
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Tue, 17 Aug 2021 22:56:47 +0530
From:   Prasad Malisetty <pmaliset@codeaurora.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org, bhelgaas@google.com,
        robh+dt@kernel.org, swboyd@chromium.org, lorenzo.pieralisi@arm.com,
        svarbanov@mm-sol.com
Cc:     devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        dianders@chromium.org, mka@chromium.org, vbadigan@codeaurora.org,
        sallenki@codeaurora.org, manivannan.sadhasivam@linaro.org
Subject: Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY
 init in SC7280
In-Reply-To: <1628568516-24155-5-git-send-email-pmaliset@codeaurora.org>
References: <1628568516-24155-1-git-send-email-pmaliset@codeaurora.org>
 <1628568516-24155-5-git-send-email-pmaliset@codeaurora.org>
Message-ID: <349b1178f071407dfad8ba3050482772@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Precedence: bulk

On 2021-08-10 09:38, Prasad Malisetty wrote:
> On the SC7280, By default the clock source for pcie_1_pipe is
> TCXO for gdsc enable. But after the PHY is initialized, the clock
> source must be switched to gcc_pcie_1_pipe_clk from TCXO.
> 
> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> b/drivers/pci/controller/dwc/pcie-qcom.c
> index 8a7a300..39e3b21 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -166,6 +166,8 @@ struct qcom_pcie_resources_2_7_0 {
>  	struct regulator_bulk_data supplies[2];
>  	struct reset_control *pci_reset;
>  	struct clk *pipe_clk;
> +	struct clk *gcc_pcie_1_pipe_clk_src;
> +	struct clk *phy_pipe_clk;
>  };
> 
>  union qcom_pcie_resources {
> @@ -1167,6 +1169,16 @@ static int qcom_pcie_get_resources_2_7_0(struct
> qcom_pcie *pcie)
>  	if (ret < 0)
>  		return ret;
> 
> +	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {
> +		res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux");
> +		if (IS_ERR(res->gcc_pcie_1_pipe_clk_src))
> +			return PTR_ERR(res->gcc_pcie_1_pipe_clk_src);
> +
> +		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
> +		if (IS_ERR(res->phy_pipe_clk))
> +			return PTR_ERR(res->phy_pipe_clk);
> +	}
> +

Hi All,

Greetings!

I would like to check is there any other better approach instead of 
compatible method here as well or is it fine to use compatible method.

Thanks
-Prasad

>  	res->pipe_clk = devm_clk_get(dev, "pipe");
>  	return PTR_ERR_OR_ZERO(res->pipe_clk);
>  }
> @@ -1255,6 +1267,12 @@ static void qcom_pcie_deinit_2_7_0(struct
> qcom_pcie *pcie)
>  static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
>  {
>  	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	struct device_node *node = dev->of_node;
> +
> +	if (of_property_read_bool(node, "pipe-clk-source-switch"))
> +		clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk);
> 
>  	return clk_prepare_enable(res->pipe_clk);
>  }