Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <1628754078-29779-1-git-send-email-rajpat@codeaurora.org> <1628754078-29779-4-git-send-email-rajpat@codeaurora.org>
In-Reply-To: <1628754078-29779-4-git-send-email-rajpat@codeaurora.org>
From:   Doug Anderson <dianders@chromium.org>
Date:   Wed, 18 Aug 2021 17:04:18 -0700
Message-ID: <CAD=FV=Vb2_K7QDvdMkjPLYqbVNQMa9e=3_PqREAHYMMVX-9QVQ@mail.gmail.com>
Subject: Re: [PATCH V5 3/7] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes
To:     Rajesh Patil <rajpat@codeaurora.org>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Stephen Boyd <swboyd@chromium.org>,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Rajendra Nayak <rnayak@codeaurora.org>,
        Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
        msavaliy@qti.qualcomm.com, satya priya <skakit@codeaurora.org>,
        Roja Rani Yarubandi <rojay@codeaurora.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi,

On Thu, Aug 12, 2021 at 12:42 AM Rajesh Patil <rajpat@codeaurora.org> wrote:
>
> @@ -542,8 +561,305 @@
>                         #address-cells = <2>;
>                         #size-cells = <2>;
>                         ranges;
> +                       iommus = <&apps_smmu 0x123 0x0>;
>                         status = "disabled";
>
> +                       i2c0: i2c@980000 {

Not a full review of your patch (I think Matthias has already looked
in a bunch of detail), but can I also request that you add i2c and spi
aliases in your next spin (I think you have to spin this anyway,
right?) Add these under the "aliases" mode before the mmc ones (to
keep sort order good):

i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
i2c14 = &i2c14;
i2c15 = &i2c15;

...and these after:

spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
spi5 = &spi5;
spi6 = &spi6;
spi7 = &spi7;
spi8 = &spi8;
spi9 = &spi9;
spi10 = &spi10;
spi11 = &spi11;
spi12 = &spi12;
spi13 = &spi13;
spi14 = &spi14;
spi15 = &spi15;

The "Quad SPI" doesn't get an alias, but that's OK. It doesn't have a
well-defined number in the manual and it's fine to have it be
auto-assigned. It's really just confusing when there's something with
a well-defined number in the manual and it's a _different_ one in the
logs. ;-)

-Doug