Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Guenter Roeck <groeck7@gmail.com>
Date:   Sat, 28 Aug 2021 08:54:41 -0700
From:   Guenter Roeck <linux@roeck-us.net>
To:     Aleksa Savic <savicaleksa83@gmail.com>
Cc:     linux-hwmon@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
        Jonathan Corbet <corbet@lwn.net>, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: add driver for Aquacomputer D5 Next
Message-ID: <20210828155441.GA820794@roeck-us.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Precedence: bulk

On Sat, Aug 28, 2021 at 07:26:28AM +0200, Aleksa Savic wrote:
> This driver exposes hardware sensors of the Aquacomputer D5 Next
> watercooling pump, which communicates through a proprietary USB HID
> protocol.
> 
> Available sensors are pump and fan speed, power, voltage and current, as
> well as coolant temperature. Also available through debugfs are the serial
> number, firmware version and power-on count.
> 
> Attaching a fan is optional and allows it to be controlled using
> temperature curves directly from the pump. If it's not connected,
> the fan-related sensors will report zeroes.
> 
> The pump can be configured either through software or via its physical
> interface. Configuring the pump through this driver is not implemented,
> as it seems to require sending it a complete configuration. That
> includes addressable RGB LEDs, for which there is no standard sysfs
> interface. Thus, that task is better suited for userspace tools.
> 
> This driver has been tested on x86_64, both in-kernel and as a module.
> 
> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>

Applied.

Thanks,
Guenter