Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S936501AbWLFQvg (ORCPT ); Wed, 6 Dec 2006 11:51:36 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S936499AbWLFQvg (ORCPT ); Wed, 6 Dec 2006 11:51:36 -0500 Received: from mailserver.omnibit.it ([151.1.140.19]:38970 "EHLO mailserver.omnibit.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S936501AbWLFQvf (ORCPT ); Wed, 6 Dec 2006 11:51:35 -0500 Message-ID: <3193.213.203.144.13.1165423892.squirrel@mailserver.omnibit.it> Date: Wed, 6 Dec 2006 17:51:32 +0100 (CET) Subject: Areca driver 2.6.19 on x86_64 From: filip@euroweb97.com To: support@areca.com.tw Cc: linux-kernel@vger.kernel.org, erich@areca.com.tw User-Agent: SquirrelMail/1.4.5 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1579 Lines: 63 We have a problem with the new areca driver included in kernel tree 2.6.19. ? During the boot sequence we get this output: ? ........................ Loading arcmsr.ko module ACPI: PCI Interrupt 0000:05:0e.0[A] -> Link [LINKC] -> GSI 5 (level, low) -> IRQ 5 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.41 2006-5-24 scsi0:? Areca SATA Host Adapter RAID Controller ??????????? Driver Version 1.20.00.13 arcmsr0: abort device command of scsi id=0 lun=0 arcmsr0: scsi id=0 lun=0 ccb='0xffff810037f00000' poll command abort successfully arcmsr0: abort device command of scsi id=1 lun=0 arcmsr0: scsi id=0 lun=0 ccb='0xffff810037f00000' poll command abort successfully arcmsr0: abort device command of scsi id=2 lun=0 arcmsr0: scsi id=0 lun=0 ccb='0xffff810037f00000' poll command abort successfully scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery ........................ and keeps looping through all luns with different values of ccd at each loop. Till kernel panics because of the lack of root device. ? Here is our specs: HW used: ARC1220 ARC1110 on Supermicro X6DH8-XG2, Dual Xeon 3.0GHz ? OS distro used: CentOS 4.4 x86_64 Kernel 2.6.19 with hand-crafted config, that we are able to use successfully with kernel 2.6.16.20. ? Have you any suggestions to resolve this issue ? ? Thanks in advance, Filip Majewski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/