Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210831174822.83870-1-pedro@terraco.de> <YS6kmp9wxvIok5F3@pendragon.ideasonboard.com>
In-Reply-To: <YS6kmp9wxvIok5F3@pendragon.ideasonboard.com>
From:   Pedro Terra Delboni <pedro@terraco.de>
Date:   Tue, 31 Aug 2021 21:06:56 -0300
Message-ID: <CAHKDPP_n4RZhAqaUcGZc0Z7C+fc6jh72GSzbxQHoy47-msJqGw@mail.gmail.com>
Subject: Re: [PATCH v7] media: vimc: Enable set resolution at the scaler src pad
To:     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc:     Hans Verkuil <hverkuil-cisco@xs4all.nl>,
        Dafna Hirschfeld <dafna.hirschfeld@collabora.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Shuah Khan <skhan@linuxfoundation.org>,
        linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        Gabriela Bittencourt <gabrielabittencourt00@gmail.com>,
        Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Laurent,

Thank you for all the help =)

On Tue, Aug 31, 2021 at 6:52 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Pedro,
>
> Thank you for the patch.
>
> On Tue, Aug 31, 2021 at 02:48:22PM -0300, Pedro Terra wrote:
> > Modify the scaler subdevice to accept setting the resolution of the source
> > pad (previously the source resolution would always be 3 times the sink for
> > both dimensions). Now any resolution can be set at src (even smaller ones)
> > and the sink video will be scaled to match it.
> >
> > Test example: With the vimc module up (using the default vimc topology)
> > media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
> > media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
> > media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
> > media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
> > media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
> > v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
> > v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
> > v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
> >       -stream-to=test.raw
>
> That should be --stream-to, not -stream-to.
>
> >
> > The result will be a cropped stream that can be checked with the command
> > ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
> >       -video_size "300x700" test.raw
> >
> > Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
> > Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
> > Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
> > Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
> > Signed-off-by: Pedro "pirate" Terra <pirate@terraco.de>
> >
> > ---
> >
> > Changes in V7:
> > * Corrections proposed by Laurent:
> >       - Fix commit message
> >       - Fix .rst identation
> >       - Properly initialize both pads in a loop
> >       - Placed vimc_sca_get_fmt() before set_fmt to keep
> >               the order they're set in v4l2_subdev_pad_ops structure.
> >       - Renamed variables to avoid ambiguity.
> >
> > Changes in V6:
> > * Corrections proposed by Laurent:
> >       - Corrected commit example to become file independent.
> >       - Cleaned unnecessary code inserted at vimc_sca_init_cfg
> >       - s/__u32/u32/
> >       - Refactored vimc_sca_(set/get)_fmt and vimc_sca_(get/set)_selection
> >               as suggested to make it more readable.
> >       - Corrected code alignment.
> >       - Cleaned and optimized vimc_sca_fill_src_frame
> >
> > Changes in V5:
> > * Fixed code aliment mistake
> > * Renamed some variables to make the code more readable
> > * Propagate sink pad formatting to src resetting the 1:1 scaling ratio.
> >       (the crop is also reset when this is done).
> >
> > Changes in V4:
> > * Rebased with media/master
> > * Scaling is now compatible with crop
> > * Updated test example at the commit message
> > * Add vimc prefix to the pad enumeration
> >
> > Changes in V3:
> > * Corrections suggested by Hans:
> >       - Default scaling factor is now 1 (we removed the define and
> >         set the source format equals the sink).
> >       - Removed SCA_COUNT (enum that represents the number of pads)
> >         as there always 2
> >       - Swapped the per byte pixel copy to memcpy.
> > * Corrections suggested by Dafna:
> >       - Removed from the documentation the old scaler parameter which
> >         isn't necessary anymore.
> > * Added a thank you note at the end of the email
> >
> > Changes in V2:
> > * Patch was not sent to media list mail for some reason (even though it
> > was on the Cc list), trying again.
> > * Updating documentation.
> >
> > Running
> > /usr/local/bin/v4l2-compliance -m /dev/media0
> > Gave the following result:
> > v4l2-compliance SHA: c86aab9cc7f1 2021-07-28 11:52:45
> > Grand Total for vimc device /dev/media0: 473, Succeeded: 473, Failed: 0, Warnings: 0
> > ---
> >  Documentation/admin-guide/media/vimc.rst      |  20 +-
> >  drivers/media/test-drivers/vimc/vimc-scaler.c | 366 +++++++-----------
> >  2 files changed, 148 insertions(+), 238 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/media/vimc.rst b/Documentation/admin-guide/media/vimc.rst
> > index 211cc8972410..4e5793db6651 100644
> > --- a/Documentation/admin-guide/media/vimc.rst
> > +++ b/Documentation/admin-guide/media/vimc.rst
> > @@ -61,9 +61,10 @@ vimc-debayer:
> >       * 1 Pad source
> >
> >  vimc-scaler:
> > -     Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
> > -        1920x1440 image. (this value can be configured, see at
> > -        `Module options`_).
> > +     Re-size the image to meet the source pad resolution. E.g.: if the sync pad
> > +     is configured to 360x480 and the source to 1280x720, the image will be stretched
> > +     to fit the source resolution. Works for any resolution within the vimc
> > +     limitations (even shrinking the image if necessary).
>
> Lines should be wrapped at 80 columns in the documentation.
>
> Apart from that, it all looks good.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> If you're fine with it, I can fix the two issues above when applying the
> patch to my tree, and I'll then send a pull request.

I'm fine with it, but in any case I sent you a "v8" with the proposed
changes, in case it makes things easier.
>
> Would anyone else like to review this patch ?
>
> >       Exposes:
> >
> >       * 1 Pad sink
> > @@ -75,16 +76,3 @@ vimc-capture:
> >
> >       * 1 Pad sink
> >       * 1 Pad source
> > -
> > -
> > -Module options
> > ---------------
> > -
> > -Vimc has a module parameter to configure the driver.
> > -
> > -* ``sca_mult=<unsigned int>``
> > -
> > -        Image size multiplier factor to be used to multiply both width and
> > -        height, so the image size will be ``sca_mult^2`` bigger than the
> > -        original one. Currently, only supports scaling up (the default value
> > -        is 3).
> > diff --git a/drivers/media/test-drivers/vimc/vimc-scaler.c b/drivers/media/test-drivers/vimc/vimc-scaler.c
> > index 06880dd0b6ac..820b8f5b502f 100644
> > --- a/drivers/media/test-drivers/vimc/vimc-scaler.c
> > +++ b/drivers/media/test-drivers/vimc/vimc-scaler.c
> > @@ -6,6 +6,7 @@
> >   */
> >
> >  #include <linux/moduleparam.h>
> > +#include <linux/string.h>
> >  #include <linux/vmalloc.h>
> >  #include <linux/v4l2-mediabus.h>
> >  #include <media/v4l2-rect.h>
> > @@ -13,11 +14,11 @@
> >
> >  #include "vimc-common.h"
> >
> > -static unsigned int sca_mult = 3;
> > -module_param(sca_mult, uint, 0000);
> > -MODULE_PARM_DESC(sca_mult, " the image size multiplier");
> > -
> > -#define MAX_ZOOM     8
> > +/* Pad identifier */
> > +enum vic_sca_pad {
> > +     VIMC_SCA_SINK = 0,
> > +     VIMC_SCA_SRC = 1,
> > +};
> >
> >  #define VIMC_SCA_FMT_WIDTH_DEFAULT  640
> >  #define VIMC_SCA_FMT_HEIGHT_DEFAULT 480
> > @@ -25,19 +26,16 @@ MODULE_PARM_DESC(sca_mult, " the image size multiplier");
> >  struct vimc_sca_device {
> >       struct vimc_ent_device ved;
> >       struct v4l2_subdev sd;
> > -     /* NOTE: the source fmt is the same as the sink
> > -      * with the width and hight multiplied by mult
> > -      */
> > -     struct v4l2_mbus_framefmt sink_fmt;
> >       struct v4l2_rect crop_rect;
> > +     /* Frame format for both sink and src pad */
> > +     struct v4l2_mbus_framefmt fmt[2];
> >       /* Values calculated when the stream starts */
> >       u8 *src_frame;
> > -     unsigned int src_line_size;
> >       unsigned int bpp;
> >       struct media_pad pads[2];
> >  };
> >
> > -static const struct v4l2_mbus_framefmt sink_fmt_default = {
> > +static const struct v4l2_mbus_framefmt fmt_default = {
> >       .width = VIMC_SCA_FMT_WIDTH_DEFAULT,
> >       .height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
> >       .code = MEDIA_BUS_FMT_RGB888_1X24,
> > @@ -72,17 +70,6 @@ vimc_sca_get_crop_bound_sink(const struct v4l2_mbus_framefmt *sink_fmt)
> >       return r;
> >  }
> >
> > -static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
> > -                                   const struct v4l2_mbus_framefmt *sink_fmt)
> > -{
> > -     const struct v4l2_rect sink_rect =
> > -             vimc_sca_get_crop_bound_sink(sink_fmt);
> > -
> > -     /* Disallow rectangles smaller than the minimal one. */
> > -     v4l2_rect_set_min_size(r, &crop_rect_min);
> > -     v4l2_rect_map_inside(r, &sink_rect);
> > -}
> > -
> >  static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
> >                            struct v4l2_subdev_state *sd_state)
> >  {
> > @@ -90,19 +77,14 @@ static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
> >       struct v4l2_rect *r;
> >       unsigned int i;
> >
> > -     mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -     *mf = sink_fmt_default;
> > -
> > -     r = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > -     *r = crop_rect_default;
> > -
> > -     for (i = 1; i < sd->entity.num_pads; i++) {
> > +     for (i = 0; i < sd->entity.num_pads; i++) {
> >               mf = v4l2_subdev_get_try_format(sd, sd_state, i);
> > -             *mf = sink_fmt_default;
> > -             mf->width = mf->width * sca_mult;
> > -             mf->height = mf->height * sca_mult;
> > +             *mf = fmt_default;
> >       }
> >
> > +     r = v4l2_subdev_get_try_crop(sd, sd_state, VIMC_SCA_SINK);
> > +     *r = crop_rect_default;
> > +
> >       return 0;
> >  }
> >
> > @@ -144,112 +126,108 @@ static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd,
> >       fse->min_width = VIMC_FRAME_MIN_WIDTH;
> >       fse->min_height = VIMC_FRAME_MIN_HEIGHT;
> >
> > -     if (VIMC_IS_SINK(fse->pad)) {
> > -             fse->max_width = VIMC_FRAME_MAX_WIDTH;
> > -             fse->max_height = VIMC_FRAME_MAX_HEIGHT;
> > -     } else {
> > -             fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM;
> > -             fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM;
> > -     }
> > +     fse->max_width = VIMC_FRAME_MAX_WIDTH;
> > +     fse->max_height = VIMC_FRAME_MAX_HEIGHT;
> >
> >       return 0;
> >  }
> >
> > +static struct v4l2_mbus_framefmt *
> > +vimc_sca_pad_format(struct vimc_sca_device *vsca,
> > +                 struct v4l2_subdev_state *sd_state, u32 pad,
> > +                 enum v4l2_subdev_format_whence which)
> > +{
> > +     if (which == V4L2_SUBDEV_FORMAT_TRY)
> > +             return v4l2_subdev_get_try_format(&vsca->sd, sd_state, pad);
> > +     else
> > +             return &vsca->fmt[pad];
> > +}
> > +
> > +static struct v4l2_rect *
> > +vimc_sca_pad_crop(struct vimc_sca_device *vsca,
> > +               struct v4l2_subdev_state *sd_state,
> > +               enum v4l2_subdev_format_whence which)
> > +{
> > +     if (which == V4L2_SUBDEV_FORMAT_TRY)
> > +             return v4l2_subdev_get_try_crop(&vsca->sd, sd_state,
> > +                                             VIMC_SCA_SINK);
> > +     else
> > +             return &vsca->crop_rect;
> > +}
> > +
> >  static int vimc_sca_get_fmt(struct v4l2_subdev *sd,
> >                           struct v4l2_subdev_state *sd_state,
> >                           struct v4l2_subdev_format *format)
> >  {
> >       struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> > -     struct v4l2_rect *crop_rect;
> > -
> > -     /* Get the current sink format */
> > -     if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> > -             format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -             crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > -     } else {
> > -             format->format = vsca->sink_fmt;
> > -             crop_rect = &vsca->crop_rect;
> > -     }
> > -
> > -     /* Scale the frame size for the source pad */
> > -     if (VIMC_IS_SRC(format->pad)) {
> > -             format->format.width = crop_rect->width * sca_mult;
> > -             format->format.height = crop_rect->height * sca_mult;
> > -     }
> >
> > +     format->format = *vimc_sca_pad_format(vsca, sd_state, format->pad,
> > +                                           format->which);
> >       return 0;
> >  }
> >
> > -static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
> > -{
> > -     const struct vimc_pix_map *vpix;
> > -
> > -     /* Only accept code in the pix map table in non bayer format */
> > -     vpix = vimc_pix_map_by_code(fmt->code);
> > -     if (!vpix || vpix->bayer)
> > -             fmt->code = sink_fmt_default.code;
> > -
> > -     fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
> > -                          VIMC_FRAME_MAX_WIDTH) & ~1;
> > -     fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
> > -                           VIMC_FRAME_MAX_HEIGHT) & ~1;
> > -
> > -     if (fmt->field == V4L2_FIELD_ANY)
> > -             fmt->field = sink_fmt_default.field;
> > -
> > -     vimc_colorimetry_clamp(fmt);
> > -}
> > -
> >  static int vimc_sca_set_fmt(struct v4l2_subdev *sd,
> >                           struct v4l2_subdev_state *sd_state,
> > -                         struct v4l2_subdev_format *fmt)
> > +                         struct v4l2_subdev_format *format)
> >  {
> >       struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> > -     struct v4l2_mbus_framefmt *sink_fmt;
> > -     struct v4l2_rect *crop_rect;
> > +     struct v4l2_mbus_framefmt *fmt;
> >
> > -     if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -             /* Do not change the format while stream is on */
> > -             if (vsca->src_frame)
> > -                     return -EBUSY;
> > +     /* Do not change the active format while stream is on */
> > +     if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && vsca->src_frame)
> > +             return -EBUSY;
> >
> > -             sink_fmt = &vsca->sink_fmt;
> > -             crop_rect = &vsca->crop_rect;
> > -     } else {
> > -             sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -             crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > +     fmt = vimc_sca_pad_format(vsca, sd_state, format->pad, format->which);
> > +
> > +     /*
> > +      * The media bus code and colorspace can only be changed on the sink
> > +      * pad, the source pad only follows.
> > +      */
> > +     if (format->pad == VIMC_SCA_SINK) {
> > +             const struct vimc_pix_map *vpix;
> > +
> > +             /* Only accept code in the pix map table in non bayer format. */
> > +             vpix = vimc_pix_map_by_code(format->format.code);
> > +             if (vpix && !vpix->bayer)
> > +                     fmt->code = format->format.code;
> > +             else
> > +                     fmt->code = fmt_default.code;
> > +
> > +             /* Clamp the colorspace to valid values. */
> > +             fmt->colorspace = format->format.colorspace;
> > +             fmt->ycbcr_enc = format->format.ycbcr_enc;
> > +             fmt->quantization = format->format.quantization;
> > +             fmt->xfer_func = format->format.xfer_func;
> > +             vimc_colorimetry_clamp(fmt);
> >       }
> >
> > +     /* Clamp and align the width and height */
> > +     fmt->width = clamp_t(u32, format->format.width, VIMC_FRAME_MIN_WIDTH,
> > +                          VIMC_FRAME_MAX_WIDTH) & ~1;
> > +     fmt->height = clamp_t(u32, format->format.height, VIMC_FRAME_MIN_HEIGHT,
> > +                           VIMC_FRAME_MAX_HEIGHT) & ~1;
> > +
> >       /*
> > -      * Do not change the format of the source pad,
> > -      * it is propagated from the sink
> > +      * Propagate the sink pad format to the crop rectangle and the source
> > +      * pad.
> >        */
> > -     if (VIMC_IS_SRC(fmt->pad)) {
> > -             fmt->format = *sink_fmt;
> > -             fmt->format.width = crop_rect->width * sca_mult;
> > -             fmt->format.height = crop_rect->height * sca_mult;
> > -     } else {
> > -             /* Set the new format in the sink pad */
> > -             vimc_sca_adjust_sink_fmt(&fmt->format);
> > -
> > -             dev_dbg(vsca->ved.dev, "%s: sink format update: "
> > -                     "old:%dx%d (0x%x, %d, %d, %d, %d) "
> > -                     "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name,
> > -                     /* old */
> > -                     sink_fmt->width, sink_fmt->height, sink_fmt->code,
> > -                     sink_fmt->colorspace, sink_fmt->quantization,
> > -                     sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
> > -                     /* new */
> > -                     fmt->format.width, fmt->format.height, fmt->format.code,
> > -                     fmt->format.colorspace, fmt->format.quantization,
> > -                     fmt->format.xfer_func, fmt->format.ycbcr_enc);
> > -
> > -             *sink_fmt = fmt->format;
> > -
> > -             /* Do the crop, but respect the current bounds */
> > -             vimc_sca_adjust_sink_crop(crop_rect, sink_fmt);
> > +     if (format->pad == VIMC_SCA_SINK) {
> > +             struct v4l2_mbus_framefmt *src_fmt;
> > +             struct v4l2_rect *crop;
> > +
> > +             crop = vimc_sca_pad_crop(vsca, sd_state, format->which);
> > +             crop->width = fmt->width;
> > +             crop->height = fmt->height;
> > +             crop->top = 0;
> > +             crop->left = 0;
> > +
> > +             src_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SRC,
> > +                                           format->which);
> > +             *src_fmt = *fmt;
> >       }
> >
> > +     format->format = *fmt;
> > +
> >       return 0;
> >  }
> >
> > @@ -259,24 +237,17 @@ static int vimc_sca_get_selection(struct v4l2_subdev *sd,
> >  {
> >       struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> >       struct v4l2_mbus_framefmt *sink_fmt;
> > -     struct v4l2_rect *crop_rect;
> >
> >       if (VIMC_IS_SRC(sel->pad))
> >               return -EINVAL;
> >
> > -     if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -             sink_fmt = &vsca->sink_fmt;
> > -             crop_rect = &vsca->crop_rect;
> > -     } else {
> > -             sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -             crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > -     }
> > -
> >       switch (sel->target) {
> >       case V4L2_SEL_TGT_CROP:
> > -             sel->r = *crop_rect;
> > +             sel->r = *vimc_sca_pad_crop(vsca, sd_state, sel->which);
> >               break;
> >       case V4L2_SEL_TGT_CROP_BOUNDS:
> > +             sink_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SINK,
> > +                                            sel->which);
> >               sel->r = vimc_sca_get_crop_bound_sink(sink_fmt);
> >               break;
> >       default:
> > @@ -286,6 +257,17 @@ static int vimc_sca_get_selection(struct v4l2_subdev *sd,
> >       return 0;
> >  }
> >
> > +static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
> > +                                   const struct v4l2_mbus_framefmt *sink_fmt)
> > +{
> > +     const struct v4l2_rect sink_rect =
> > +             vimc_sca_get_crop_bound_sink(sink_fmt);
> > +
> > +     /* Disallow rectangles smaller than the minimal one. */
> > +     v4l2_rect_set_min_size(r, &crop_rect_min);
> > +     v4l2_rect_map_inside(r, &sink_rect);
> > +}
> > +
> >  static int vimc_sca_set_selection(struct v4l2_subdev *sd,
> >                                 struct v4l2_subdev_state *sd_state,
> >                                 struct v4l2_subdev_selection *sel)
> > @@ -294,30 +276,18 @@ static int vimc_sca_set_selection(struct v4l2_subdev *sd,
> >       struct v4l2_mbus_framefmt *sink_fmt;
> >       struct v4l2_rect *crop_rect;
> >
> > -     if (VIMC_IS_SRC(sel->pad))
> > +     /* Only support setting the crop of the sink pad */
> > +     if (VIMC_IS_SRC(sel->pad) || sel->target != V4L2_SEL_TGT_CROP)
> >               return -EINVAL;
> >
> > -     if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -             /* Do not change the format while stream is on */
> > -             if (vsca->src_frame)
> > -                     return -EBUSY;
> > +     if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE && vsca->src_frame)
> > +             return -EBUSY;
> >
> > -             crop_rect = &vsca->crop_rect;
> > -             sink_fmt = &vsca->sink_fmt;
> > -     } else {
> > -             crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > -             sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -     }
> > -
> > -     switch (sel->target) {
> > -     case V4L2_SEL_TGT_CROP:
> > -             /* Do the crop, but respect the current bounds */
> > -             vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
> > -             *crop_rect = sel->r;
> > -             break;
> > -     default:
> > -             return -EINVAL;
> > -     }
> > +     crop_rect = vimc_sca_pad_crop(vsca, sd_state, sel->which);
> > +     sink_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SINK,
> > +                                    sel->which);
> > +     vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
> > +     *crop_rect = sel->r;
> >
> >       return 0;
> >  }
> > @@ -344,16 +314,12 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
> >                       return 0;
> >
> >               /* Save the bytes per pixel of the sink */
> > -             vpix = vimc_pix_map_by_code(vsca->sink_fmt.code);
> > +             vpix = vimc_pix_map_by_code(vsca->fmt[VIMC_SCA_SINK].code);
> >               vsca->bpp = vpix->bpp;
> >
> > -             /* Calculate the width in bytes of the src frame */
> > -             vsca->src_line_size = vsca->crop_rect.width *
> > -                                   sca_mult * vsca->bpp;
> > -
> >               /* Calculate the frame size of the source pad */
> > -             frame_size = vsca->src_line_size * vsca->crop_rect.height *
> > -                          sca_mult;
> > +             frame_size = vsca->fmt[VIMC_SCA_SRC].width
> > +                        * vsca->fmt[VIMC_SCA_SRC].height * vsca->bpp;
> >
> >               /* Allocate the frame buffer. Use vmalloc to be able to
> >                * allocate a large amount of memory
> > @@ -382,77 +348,32 @@ static const struct v4l2_subdev_ops vimc_sca_ops = {
> >       .video = &vimc_sca_video_ops,
> >  };
> >
> > -static void vimc_sca_fill_pix(u8 *const ptr,
> > -                           const u8 *const pixel,
> > -                           const unsigned int bpp)
> > -{
> > -     unsigned int i;
> > -
> > -     /* copy the pixel to the pointer */
> > -     for (i = 0; i < bpp; i++)
> > -             ptr[i] = pixel[i];
> > -}
> > -
> > -static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
> > -                            unsigned int lin, unsigned int col,
> > -                            const u8 *const sink_frame)
> > -{
> > -     const struct v4l2_rect crop_rect = vsca->crop_rect;
> > -     unsigned int i, j, index;
> > -     const u8 *pixel;
> > -
> > -     /* Point to the pixel value in position (lin, col) in the sink frame */
> > -     index = VIMC_FRAME_INDEX(lin, col,
> > -                              vsca->sink_fmt.width,
> > -                              vsca->bpp);
> > -     pixel = &sink_frame[index];
> > -
> > -     dev_dbg(vsca->ved.dev,
> > -             "sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n",
> > -             vsca->sd.name, lin, col, index);
> > -
> > -     /* point to the place we are going to put the first pixel
> > -      * in the scaled src frame
> > -      */
> > -     lin -= crop_rect.top;
> > -     col -= crop_rect.left;
> > -     index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult,
> > -                              crop_rect.width * sca_mult, vsca->bpp);
> > -
> > -     dev_dbg(vsca->ved.dev, "sca: %s: scale_pix src pos %dx%d, index %d\n",
> > -             vsca->sd.name, lin * sca_mult, col * sca_mult, index);
> > -
> > -     /* Repeat this pixel mult times */
> > -     for (i = 0; i < sca_mult; i++) {
> > -             /* Iterate through each beginning of a
> > -              * pixel repetition in a line
> > -              */
> > -             for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) {
> > -                     dev_dbg(vsca->ved.dev,
> > -                             "sca: %s: sca: scale_pix src pos %d\n",
> > -                             vsca->sd.name, index + j);
> > -
> > -                     /* copy the pixel to the position index + j */
> > -                     vimc_sca_fill_pix(&vsca->src_frame[index + j],
> > -                                       pixel, vsca->bpp);
> > -             }
> > -
> > -             /* move the index to the next line */
> > -             index += vsca->src_line_size;
> > -     }
> > -}
> > -
> >  static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
> >                                   const u8 *const sink_frame)
> >  {
> > -     const struct v4l2_rect r = vsca->crop_rect;
> > -     unsigned int i, j;
> > -
> > -     /* Scale each pixel from the original sink frame */
> > -     /* TODO: implement scale down, only scale up is supported for now */
> > -     for (i = r.top; i < r.top + r.height; i++)
> > -             for (j = r.left; j < r.left + r.width; j++)
> > -                     vimc_sca_scale_pix(vsca, i, j, sink_frame);
> > +     const struct v4l2_mbus_framefmt *src_fmt = &vsca->fmt[VIMC_SCA_SRC];
> > +     const struct v4l2_rect *r = &vsca->crop_rect;
> > +     unsigned int snk_width = vsca->fmt[VIMC_SCA_SINK].width;
> > +     unsigned int src_x, src_y;
> > +     u8 *walker = vsca->src_frame;
> > +
> > +     /* Set each pixel at the src_frame to its sink_frame equivalent */
> > +     for (src_y = 0; src_y < src_fmt->height; src_y++) {
> > +             unsigned int snk_y, y_offset;
> > +
> > +             snk_y = (src_y * r->height) / src_fmt->height + r->top;
> > +             y_offset = snk_y * snk_width * vsca->bpp;
> > +
> > +             for (src_x = 0; src_x < src_fmt->width; src_x++) {
> > +                     unsigned int snk_x, x_offset, index;
> > +
> > +                     snk_x = (src_x * r->width) / src_fmt->width + r->left;
> > +                     x_offset = snk_x * vsca->bpp;
> > +                     index = y_offset + x_offset;
> > +                     memcpy(walker, &sink_frame[index], vsca->bpp);
> > +                     walker += vsca->bpp;
> > +             }
> > +     }
> >  }
> >
> >  static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
> > @@ -492,8 +413,8 @@ static struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
> >               return ERR_PTR(-ENOMEM);
> >
> >       /* Initialize ved and sd */
> > -     vsca->pads[0].flags = MEDIA_PAD_FL_SINK;
> > -     vsca->pads[1].flags = MEDIA_PAD_FL_SOURCE;
> > +     vsca->pads[VIMC_SCA_SINK].flags = MEDIA_PAD_FL_SINK;
> > +     vsca->pads[VIMC_SCA_SRC].flags = MEDIA_PAD_FL_SOURCE;
> >
> >       ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
> >                                  vcfg_name,
> > @@ -508,7 +429,8 @@ static struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
> >       vsca->ved.dev = vimc->mdev.dev;
> >
> >       /* Initialize the frame format */
> > -     vsca->sink_fmt = sink_fmt_default;
> > +     vsca->fmt[VIMC_SCA_SINK] = fmt_default;
> > +     vsca->fmt[VIMC_SCA_SRC] = fmt_default;
> >
> >       /* Initialize the crop selection */
> >       vsca->crop_rect = crop_rect_default;
>
> --
> Regards,
>
> Laurent Pinchart

Regards,
Pedro