Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] Input: ili210x - Set the device name according to the
 device model
To:     Rogerio Pimentel <rpimentel.silva@gmail.com>
Cc:     dmitry.torokhov@gmail.com, hansemro@outlook.com,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20210901192229.29864-1-rpimentel.silva@gmail.com>
 <4e8ad91c-2554-4b8f-94db-aa5add5f524d@denx.de>
 <CAOkaPuUYQQHQZrjj3CcS1dOZrA=rH=nJJPKaPNNdBJaXO_t7ng@mail.gmail.com>
From:   Marek Vasut <marex@denx.de>
Message-ID: <c0f13f0f-48c8-f58d-4589-ad78b64fe809@denx.de>
Date:   Wed, 1 Sep 2021 22:48:35 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.13.0
MIME-Version: 1.0
In-Reply-To: <CAOkaPuUYQQHQZrjj3CcS1dOZrA=rH=nJJPKaPNNdBJaXO_t7ng@mail.gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 9/1/21 10:27 PM, Rogerio Pimentel wrote:
> On Wed, Sep 1, 2021 at 4:46 PM Marek Vasut <marex@denx.de> wrote:
>>
>> On 9/1/21 9:22 PM, Rogerio Pimentel wrote:
>>
>> [...]
>>
>>> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
>>> index 30576a5f2f04..ca7af4a6f588 100644
>>> --- a/drivers/input/touchscreen/ili210x.c
>>> +++ b/drivers/input/touchscreen/ili210x.c
>>> @@ -19,6 +19,8 @@
>>>    #define ILI251X_DATA_SIZE1  31
>>>    #define ILI251X_DATA_SIZE2  20
>>>
>>> +#define ILI_NAME_LEN         27
>>> +
>>>    /* Touchscreen commands */
>>>    #define REG_TOUCHDATA               0x10
>>>    #define REG_PANEL_INFO              0x20
>>> @@ -394,6 +396,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>>>        struct input_dev *input;
>>>        int error;
>>>        unsigned int max_xy;
>>> +     char *model_name;
>>>
>>>        dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
>>>
>>> @@ -440,7 +443,11 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>>>        i2c_set_clientdata(client, priv);
>>>
>>>        /* Setup input device */
>>> -     input->name = "ILI210x Touchscreen";
>>> +     input->name = "Ilitek         Touchscreen";
>>> +     model_name = (char *)input->name;
>>> +     snprintf(model_name, ILI_NAME_LEN, "Ilitek %s Touchscreen",
>>
>> Which ilitek devices do you have available exactly ?
>>
>> There is a firmware interface which does report the device type, but I
>> don't know whether it works on all the ilitek touchscreen devices. If it
>> does, then it could be used here to pull the type from the firmware and
>> then use this instead
>>
>> snprintf(model_name, ILI_NAME_LEN, "Ilitek ILI%04x Touchscreen", type);
>>
>> Try this command against the touch controller, it sends it command 0x61
>> and reads two bytes of the reply:
>> i2ctransfer -f -y 1 w1@0x41 0x61 r2
>> 0x10 0x25 # <---- on ILI2510 it reports 0x25 0x10 in reverse
> 
> Thanks for the comments and suggestions. I'll make the changes and send V2.

Can you tell which ILI2xxx touch controller you have exactly ?

Can you share the output of the 'i2ctransfer' (from i2c-tools) command 
above ?