Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   <alexandru.tachici@analog.com>
To:     <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     <jic23@kernel.org>
Subject: [PATCH v2 2/3] iio: adc: ad7780: Fix IRQ flag
Date:   Mon, 6 Sep 2021 09:56:29 +0300
Message-ID: <20210906065630.16325-3-alexandru.tachici@analog.com>
In-Reply-To: <20210906065630.16325-1-alexandru.tachici@analog.com>
References: <20210906065630.16325-1-alexandru.tachici@analog.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Alexandru Tachici <alexandru.tachici@analog.com>

Correct IRQ flag here is falling.

In Sigma-Delta devices the SDO line is also used as an interrupt.
Leaving IRQ on level instead of falling might trigger a sample read
when the IRQ is enabled, as the SDO line is already low. Not sure
if SDO line will always imediately go high in ad_sd_buffer_postenable
before the IRQ is enabled.

Also the datasheet seem to explicitly say the falling edge of the SDO
should be used as an interrupt:
From the AD7780 datasheet: " The DOUT/Figure 22 RDY falling edge
can be used as an interrupt to a processor"

Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
 drivers/iio/adc/ad7780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c
index 42bb952f4738..b6e8c8abf6f4 100644
--- a/drivers/iio/adc/ad7780.c
+++ b/drivers/iio/adc/ad7780.c
@@ -203,7 +203,7 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
 	.set_mode = ad7780_set_mode,
 	.postprocess_sample = ad7780_postprocess_sample,
 	.has_registers = false,
-	.irq_flags = IRQF_TRIGGER_LOW,
+	.irq_flags = IRQF_TRIGGER_FALLING,
 };
 
 #define _AD7780_CHANNEL(_bits, _wordsize, _mask_all)		\
-- 
2.25.1