Date: Mon, 11 Dec 2006 18:46:31 +0800
Message-Id: <200612111046.kBBAkV8Y029087@localhost.localdomain>
From: jayakumar.lkml@gmail.com
Subject: [RFC 2.6.19 1/1] fbdev,mm: hecuba/E-Ink fbdev driver v2
To: linux-fbdev-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
       linux-mm@kvack.org
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 20927
Lines: 758

Hi Geert, James, FBdev, MM folk, 

Appended is my attempt to support the Hecuba/E-Ink display. I've added
some code to do deferred IO. This is there in order to hide the latency
associated with updating the display (500ms to 800ms). The method used
is to fake a framebuffer in memory. Then use pagefaults followed by delayed
unmaping and only then do the actual framebuffer update. To explain this 
better, the usage scenario is like this:

- userspace app like Xfbdev mmaps framebuffer
- driver handles and sets up nopage and page_mkwrite handlers
- app tries to write to mmaped vaddress
- get pagefault and reaches driver's nopage handler
- driver's nopage handler finds and returns physical page ( no
  actual framebuffer )
- write so get page_mkwrite where we add this page to a list
- also schedules a workqueue task to be run after a delay
- app continues writing to that page with no additional cost
- the workqueue task comes in and unmaps the pages on the list, then 
  completes the work associated with updating the framebuffer
- app tries to write to the address (that has now been unmapped)
- get pagefault and the above sequence occurs again

The desire is roughly to allow bursty framebuffer writes to occur. 
Then after some time when hopefully things have gone quiet, we go and 
really update the framebuffer. For this type of nonvolatile high latency 
display, the desired image is the final image rather than intermediate 
stages which is why it's okay to not update for each write that is 
occuring.

Please let me know if this looks okay so far and if you have any feedback
or suggestions. Thanks to peterz for the page_mkwrite/clean suggestions
that made this possible.

Thanks,
Jaya Kumar

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>

---
 
 drivers/video/Kconfig    |   13 
 drivers/video/Makefile   |    1 
 drivers/video/hecubafb.c |  643 +++++++++++++++++++++++++++++++++++++++++++++++
 mm/filemap.c             |    1 
 mm/rmap.c                |    1 
 5 files changed, 659 insertions(+)

---

diff -X linux-2.6.19/Documentation/dontdiff -uprN linux-2.6.19-vanilla/drivers/video/hecubafb.c linux-2.6.19/drivers/video/hecubafb.c
--- linux-2.6.19-vanilla/drivers/video/hecubafb.c	1970-01-01 07:30:00.000000000 +0730
+++ linux-2.6.19/drivers/video/hecubafb.c	2006-12-11 18:52:07.000000000 +0800
@@ -0,0 +1,643 @@
+/*
+ * linux/drivers/video/hecubafb.c -- FB driver for Hecuba controller
+ *
+ * Copyright (C) 2006, Jaya Kumar 
+ * This work was sponsored by CIS(M) Sdn Bhd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ * This work was possible because of apollo display code from E-Ink's website
+ * http://support.eink.com/community
+ * All information used to write this code is from public material made
+ * available by E-Ink on its support site. Some commands such as 0xA4
+ * were found by looping through cmd=0x00 thru 0xFF and supplying random
+ * values. There are other commands that the display is capable of,
+ * beyond the 5 used here but they are more complex. 
+ *
+ * This driver is written to be used with the Hecuba display controller
+ * board, and tested with the EInk 800x600 display in 1 bit mode. 
+ * The interface between Hecuba and the host is TTL based GPIO. The
+ * GPIO requirements are 8 writable data lines and 6 lines for control.
+ * Only 4 of the controls are actually used here but 6 for future use.
+ * The driver requires the IO addresses for data and control GPIO at 
+ * load time. It is also possible to use this display with a standard 
+ * PC parallel port. 
+ *
+ * General notes:
+ * - User must set hecubafb_enable=1 to enable it
+ * - User must set dio_addr=0xIOADDR cio_addr=0xIOADDR c2io_addr=0xIOADDR
+ *
+ */
+
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+
+/* to support deferred IO */
+#include <linux/rmap.h>
+#include <linux/pagemap.h>
+
+/* Apollo controller specific defines */
+#define APOLLO_START_NEW_IMG	0xA0
+#define APOLLO_STOP_IMG_DATA	0xA1
+#define APOLLO_DISPLAY_IMG	0xA2
+#define APOLLO_ERASE_DISPLAY	0xA3
+#define APOLLO_INIT_DISPLAY	0xA4
+
+/* Hecuba interface specific defines */
+/* WUP is inverted, CD is inverted, DS is inverted */
+#define HCB_NWUP_BIT	0x01
+#define HCB_NDS_BIT 	0x02
+#define HCB_RW_BIT 	0x04
+#define HCB_NCD_BIT 	0x08
+#define HCB_ACK_BIT 	0x80
+
+/* Display specific information */
+#define DPY_W 600
+#define DPY_H 800
+
+struct hecubafb_par {
+	unsigned long dio_addr;
+	unsigned long cio_addr;
+	unsigned long c2io_addr;
+	unsigned char ctl;
+	atomic_t ref_count;
+	atomic_t vma_count;
+	struct fb_info *info;
+	unsigned int irq;
+	spinlock_t lock;
+	struct workqueue_struct *wq;
+	struct work_struct work;
+	struct list_head pagelist;
+};
+
+struct page_list {
+	struct list_head list;
+	struct page *page;
+}; 
+
+static struct fb_fix_screeninfo hecubafb_fix __initdata = {
+	.id =		"hecubafb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_MONO01,
+	.xpanstep =	0,
+	.ypanstep =	0,
+	.ywrapstep =	0,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo hecubafb_var __initdata = {
+	.xres		= DPY_W,
+	.yres		= DPY_H,
+	.xres_virtual	= DPY_W,
+	.yres_virtual	= DPY_H,
+	.bits_per_pixel	= 1,
+	.nonstd		= 1,
+};
+
+static unsigned long dio_addr;
+static unsigned long cio_addr;
+static unsigned long c2io_addr;
+static unsigned long splashval;
+static unsigned int nosplash;
+static unsigned int hecubafb_enable;
+static unsigned int irq;
+
+static DECLARE_WAIT_QUEUE_HEAD(hecubafb_waitq);
+
+static void hcb_set_ctl(struct hecubafb_par *par)
+{
+	outb(par->ctl, par->cio_addr);
+}
+
+static unsigned char hcb_get_ctl(struct hecubafb_par *par)
+{
+	return inb(par->c2io_addr);
+}
+
+static void hcb_set_data(struct hecubafb_par *par, unsigned char value)
+{
+	outb(value, par->dio_addr);
+}
+
+static int __devinit apollo_init_control(struct hecubafb_par *par)
+{
+	unsigned char ctl;
+	/* for init, we want the following setup to be set:
+	WUP = lo
+	ACK = hi
+	DS = hi
+	RW = hi
+	CD = lo 
+	*/
+
+	/* write WUP to lo, DS to hi, RW to hi, CD to lo */
+	par->ctl = HCB_NWUP_BIT | HCB_RW_BIT | HCB_NCD_BIT ;
+	par->ctl &= ~HCB_NDS_BIT;
+	hcb_set_ctl(par);
+
+	/* check ACK is not lo */
+	ctl = hcb_get_ctl(par);
+	if ((ctl & HCB_ACK_BIT)) {
+		printk(KERN_ERR "Fail because ACK is already low\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+void hcb_wait_for_ack(struct hecubafb_par *par)
+{
+
+	int timeout;
+	unsigned char ctl;
+
+	timeout=500;
+	do {
+		ctl = hcb_get_ctl(par);
+		if ((ctl & HCB_ACK_BIT)) 
+			return;
+		udelay(1);
+	} while (timeout--);
+	printk(KERN_ERR "timed out waiting for ack\n");
+}
+
+void hcb_wait_for_ack_clear(struct hecubafb_par *par)
+{
+
+	int timeout;
+	unsigned char ctl;
+
+	timeout=500;
+	do {
+		ctl = hcb_get_ctl(par);
+		if (!(ctl & HCB_ACK_BIT)) 
+			return;
+		udelay(1);
+	} while (timeout--);
+	printk(KERN_ERR "timed out waiting for clear\n");
+}
+
+void apollo_send_data(struct hecubafb_par *par, unsigned char data)
+{
+	/* set data */
+	hcb_set_data(par, data);
+
+	/* set DS low */
+	par->ctl |= HCB_NDS_BIT;
+	hcb_set_ctl(par);
+
+	hcb_wait_for_ack(par);
+
+	/* set DS hi */
+	par->ctl &= ~(HCB_NDS_BIT);
+	hcb_set_ctl(par);
+	
+	hcb_wait_for_ack_clear(par);
+}
+
+void apollo_send_command(struct hecubafb_par *par, unsigned char data)
+{
+	/* command so set CD to high */
+	par->ctl &= ~(HCB_NCD_BIT);
+	hcb_set_ctl(par);
+
+	/* actually strobe with command */
+	apollo_send_data(par, data);
+
+	/* clear CD back to low */
+	par->ctl |= (HCB_NCD_BIT);
+	hcb_set_ctl(par);
+}
+
+/* main hecubafb functions */
+static int hecubafb_open(struct fb_info *info, int user)
+{
+	struct hecubafb_par *par = info->par;
+
+	atomic_inc(&par->ref_count);
+	return 0;
+}
+
+static int hecubafb_release(struct fb_info *info, int user)
+{
+	struct hecubafb_par *par = info->par;
+	int count = atomic_read(&par->ref_count);
+
+	if (!count)
+		return -EINVAL;
+	atomic_dec(&par->ref_count);
+	return 0;
+}
+
+#if 0
+/* can't seem to get interrupts from device yet */
+static irqreturn_t hecubafb_interrupt(int vec, void *dev_instance,
+		struct pt_regs *regs)
+{
+	struct fb_info *info = dev_instance;
+	unsigned char ctl2status;
+	struct hecubafb_par *par = info->par;
+
+	ctl2status = hcb_get_ctl(par);
+
+#if 0
+	if (!(ctl2status & 0x60)) 
+		return IRQ_NONE;
+#endif
+
+	spin_lock(&par->lock);
+	if (waitqueue_active(&hecubafb_waitq)) 
+		wake_up(&hecubafb_waitq);
+	spin_unlock(&par->lock);
+
+	return IRQ_HANDLED;
+}
+#endif
+
+static void hecubafb_dpy_update(struct hecubafb_par *par)
+{
+	int i;
+	unsigned char *buf = par->info->screen_base;
+
+	apollo_send_command(par, 0xA0);
+
+	for (i=0; i < (DPY_W*DPY_H/8); i++) {
+		apollo_send_data(par, *(buf++));
+	}
+
+	apollo_send_command(par, 0xA1);
+	apollo_send_command(par, 0xA2);
+}
+
+static void hecubafb_fillrect(struct fb_info *info,
+				   const struct fb_fillrect *rect)
+{
+	struct hecubafb_par *par = info->par;
+
+	cfb_fillrect(info, rect);
+
+	hecubafb_dpy_update(par);
+}
+
+static void hecubafb_copyarea(struct fb_info *info,
+				   const struct fb_copyarea *area)
+{
+	struct hecubafb_par *par = info->par;
+
+	cfb_copyarea(info, area);
+
+	hecubafb_dpy_update(par);
+}
+
+static void hecubafb_imageblit(struct fb_info *info, 
+				const struct fb_image *image)
+{
+	struct hecubafb_par *par = info->par;
+
+	cfb_imageblit(info, image);
+
+	hecubafb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw 
+ */
+static ssize_t hecubafb_write(struct file *file, const char __user *buf, 
+				size_t count, loff_t *ppos)
+{
+	struct inode *inode;
+	int fbidx;
+	struct fb_info *info;
+	unsigned long p;
+	int err=-EINVAL;
+	struct hecubafb_par *par;
+	unsigned int xres;
+	unsigned int fbmemlength;
+
+	p = *ppos;
+	inode = file->f_dentry->d_inode;
+	fbidx = iminor(inode);
+	info = registered_fb[fbidx];
+
+	if (!info || !info->screen_base)
+		return -ENODEV;
+
+	par = info->par;
+	xres = info->var.xres;
+	fbmemlength = (xres * info->var.yres)/8;
+
+	if (p > fbmemlength)
+		return -ENOSPC;
+
+	err = 0;
+	if ((count + p) > fbmemlength) {
+		count = fbmemlength - p;
+		err = -ENOSPC;
+	}
+
+	if (count) {
+		char *base_addr;
+
+		base_addr = info->screen_base;
+		count -= copy_from_user(base_addr + p, buf, count);
+		*ppos += count;
+		err = -EFAULT;
+	}
+
+	hecubafb_dpy_update(par);
+
+	if (count)
+		return count;
+
+	return err;
+}
+
+/* this is to find and return the vmalloc-ed fb pages */
+static struct page* hecubafb_vm_nopage(struct vm_area_struct *vma, 
+					unsigned long vaddr, int *type)
+{
+	unsigned long offset;
+	struct page *page;
+	struct fb_info *info = vma->vm_private_data;
+
+	offset = (vaddr - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
+	if (offset >= (DPY_W*DPY_H)/8)
+		return NOPAGE_SIGBUS;
+
+	page = vmalloc_to_page(info->screen_base + offset);
+	if (!page)
+		return NOPAGE_OOM;
+
+	get_page(page);
+	if (type)
+		*type = VM_FAULT_MINOR;
+	return page;
+}
+
+static int hecubafb_page_mkwrite(struct vm_area_struct *vma, 
+					struct page *page)
+{
+	struct fb_info *info = vma->vm_private_data;
+	struct hecubafb_par *par = info->par;
+	struct page_list *new;
+
+	/* this is a callback we get when userspace first tries to 
+	write to the page. we schedule a workqueue. that workqueue 
+	will eventually unmap the touched pages and execute the 
+	deferred framebuffer IO. then if userspace touches a page 
+	again, we repeat the same scheme */
+
+	new = kzalloc(sizeof(struct page_list), GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+	new->page = page;
+
+	/* protect against the workqueue changing the page list */
+	spin_lock(&par->lock);
+	list_add(&new->list, &par->pagelist);
+	spin_unlock(&par->lock);
+
+	/* come back in 1s */
+	schedule_delayed_work(&par->work, HZ);
+	return 0;
+}
+
+static void hecubafb_work(void *data)
+{
+	struct hecubafb_par *par = data;
+	struct list_head *node, *next;
+	struct page_list *cur;
+
+	/* here we unmap the pages, then do all deferred IO */
+	spin_lock(&par->lock);
+	list_for_each_safe(node, next, &par->pagelist) {
+		cur = list_entry(node, struct page_list, list);
+		list_del(node);
+		lock_page_nosync(cur->page);
+		page_mkclean(cur->page);
+		unlock_page(cur->page);
+		kfree(cur);
+	}
+	spin_unlock(&par->lock);
+	hecubafb_dpy_update(par);
+}
+
+static void hecubafb_vm_open(struct vm_area_struct *vma)
+{
+	struct fb_info *info = vma->vm_private_data;
+	struct hecubafb_par *par = info->par;
+
+	atomic_inc(&par->vma_count);
+}
+	
+static void hecubafb_vm_close(struct vm_area_struct *vma)
+{
+	struct fb_info *info = vma->vm_private_data;
+	struct hecubafb_par *par = info->par;
+
+	atomic_dec(&par->vma_count);
+}
+
+static struct vm_operations_struct hecubafb_vm_ops = {
+	.open		= hecubafb_vm_open,
+	.close		= hecubafb_vm_close,
+	.nopage   	= hecubafb_vm_nopage,
+	.page_mkwrite   = hecubafb_page_mkwrite,
+};
+
+static int hecubafb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	vma->vm_ops = &hecubafb_vm_ops;
+	vma->vm_flags |= ( VM_IO | VM_RESERVED | VM_DONTEXPAND );
+	vma->vm_private_data = info;
+	hecubafb_vm_open(vma);
+	return 0;
+}
+
+static struct fb_ops hecubafb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= hecubafb_open,
+	.fb_write	= hecubafb_write,
+	.fb_release	= hecubafb_release,
+	.fb_fillrect	= hecubafb_fillrect,
+	.fb_copyarea	= hecubafb_copyarea,
+	.fb_imageblit	= hecubafb_imageblit,
+	.fb_mmap	= hecubafb_mmap,
+};
+
+static int __devinit hecubafb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct hecubafb_par *par;
+
+	videomemorysize = (DPY_W*DPY_H)/8;
+
+	if (!(videomemory = vmalloc(videomemorysize)))
+		return retval;
+
+	memset(videomemory, 0, videomemorysize);
+
+	info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev);
+	if (!info)
+		goto err;
+
+	info->screen_base = (char __iomem *) videomemory;
+	info->fbops = &hecubafb_ops;
+
+	info->var = hecubafb_var;
+	info->fix = hecubafb_fix;
+	par = info->par;
+	par->info = info;
+
+	if (!dio_addr || !cio_addr || !c2io_addr) {
+		printk(KERN_WARNING "no IO addresses supplied\n");
+		goto err1;
+	}
+	par->dio_addr = dio_addr;
+	par->cio_addr = cio_addr;
+	par->c2io_addr = c2io_addr;
+	info->flags = FBINFO_FLAG_DEFAULT;
+	spin_lock_init(&par->lock);
+	INIT_WORK(&par->work, hecubafb_work, par);
+	INIT_LIST_HEAD(&par->pagelist);
+	par->wq = create_singlethread_workqueue("hecubafb");
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err1;
+	platform_set_drvdata(dev, info);
+#if 0
+	if (irq) {
+		par->irq = irq;
+		if (request_irq(par->irq, &hecubafb_interrupt, IRQF_SHARED,
+				"hecubafb", info)) {
+			printk(KERN_INFO
+				"hecubafb: Failed req IRQ %d\n", par->irq);
+			goto err1;
+		}
+	}
+#endif
+	printk(KERN_INFO
+	       "fb%d: Hecuba frame buffer device, using %dK of video memory\n",
+	       info->node, videomemorysize >> 10);
+
+	/* this inits the dpy */
+	apollo_init_control(par);
+
+	apollo_send_command(par, APOLLO_INIT_DISPLAY);
+	apollo_send_data(par, 0x81);
+
+	/* have to wait while display resets */
+	udelay(1000);
+
+	/* if we were told to splash the screen, we just clear it */
+	if (!nosplash) {
+		apollo_send_command(par, APOLLO_ERASE_DISPLAY);
+		apollo_send_data(par, splashval);
+	}
+
+	return 0;
+err1:
+	framebuffer_release(info);
+err:
+	vfree(videomemory);
+	return retval;
+}
+
+static int __devexit hecubafb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct hecubafb_par *par;
+
+	if (info) {
+		par = info->par;
+		flush_workqueue(par->wq);
+		destroy_workqueue(par->wq);
+		unregister_framebuffer(info);
+		vfree(info->screen_base);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+static struct platform_driver hecubafb_driver = {
+	.probe	= hecubafb_probe,
+	.remove = hecubafb_remove,
+	.driver	= {
+		.name	= "hecubafb",
+	},
+};
+
+static struct platform_device *hecubafb_device;
+
+static int __init hecubafb_init(void)
+{
+	int ret;
+
+	if (!hecubafb_enable) {
+		printk(KERN_ERR "Use hecubafb_enable to enable the device\n");
+		return -ENXIO;
+	}
+
+	ret = platform_driver_register(&hecubafb_driver);
+	if (!ret) {
+		hecubafb_device = platform_device_alloc("hecubafb", 0);
+		if (hecubafb_device) 
+			ret = platform_device_add(hecubafb_device);
+		else 
+			ret = -ENOMEM;
+
+		if (ret) {
+			platform_device_put(hecubafb_device);
+			platform_driver_unregister(&hecubafb_driver);
+		}
+	}
+	return ret;
+
+}
+
+static void __exit hecubafb_exit(void)
+{
+	platform_device_unregister(hecubafb_device);
+	platform_driver_unregister(&hecubafb_driver);
+}
+
+module_param(nosplash, uint, 0);
+MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
+module_param(hecubafb_enable, uint, 0);
+MODULE_PARM_DESC(hecubafb_enable, "Enable communication with Hecuba board");
+module_param(dio_addr, ulong, 0);
+MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
+module_param(cio_addr, ulong, 0);
+MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
+module_param(c2io_addr, ulong, 0);
+MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
+module_param(splashval, ulong, 0);
+MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white");
+module_param(irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ for the Hecuba board");
+
+module_init(hecubafb_init);
+module_exit(hecubafb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Hecuba board");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff -X linux-2.6.19/Documentation/dontdiff -uprN linux-2.6.19-vanilla/drivers/video/Kconfig linux-2.6.19/drivers/video/Kconfig
--- linux-2.6.19-vanilla/drivers/video/Kconfig	2006-12-10 13:37:44.000000000 +0800
+++ linux-2.6.19/drivers/video/Kconfig	2006-12-11 18:38:40.000000000 +0800
@@ -566,6 +566,19 @@ config FB_IMAC
 	help
 	  This is the frame buffer device driver for the Intel-based Macintosh
 
+config FB_HECUBA
+	tristate "Hecuba board support"
+	depends on FB && X86 && MMU
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the Hecuba board. This driver was tested 
+	  with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+	  interface (8 bit data, 4 bit control). If you anticpate using
+	  this driver, say Y or M; otherwise say N. You must specify the
+	  GPIO IO address to be used for setting control and data.
+
 config FB_HGA
 	tristate "Hercules mono graphics support"
 	depends on FB && X86
diff -X linux-2.6.19/Documentation/dontdiff -uprN linux-2.6.19-vanilla/drivers/video/Makefile linux-2.6.19/drivers/video/Makefile
--- linux-2.6.19-vanilla/drivers/video/Makefile	2006-12-10 13:37:44.000000000 +0800
+++ linux-2.6.19/drivers/video/Makefile	2006-12-10 13:45:47.000000000 +0800
@@ -67,6 +67,7 @@ obj-$(CONFIG_FB_SGIVW)            += sgi
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o
 obj-$(CONFIG_FB_MAC)              += macfb.o
+obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
diff -X linux-2.6.19/Documentation/dontdiff -uprN linux-2.6.19-vanilla/mm/filemap.c linux-2.6.19/mm/filemap.c
--- linux-2.6.19-vanilla/mm/filemap.c	2006-12-10 13:37:41.000000000 +0800
+++ linux-2.6.19/mm/filemap.c	2006-12-11 17:45:33.000000000 +0800
@@ -583,6 +583,7 @@ void fastcall __lock_page_nosync(struct 
 	__wait_on_bit_lock(page_waitqueue(page), &wait, __sleep_on_page_lock,
 							TASK_UNINTERRUPTIBLE);
 }
+EXPORT_SYMBOL_GPL(__lock_page_nosync);
 
 /**
  * find_get_page - find and get a page reference
diff -X linux-2.6.19/Documentation/dontdiff -uprN linux-2.6.19-vanilla/mm/rmap.c linux-2.6.19/mm/rmap.c
--- linux-2.6.19-vanilla/mm/rmap.c	2006-12-10 13:37:41.000000000 +0800
+++ linux-2.6.19/mm/rmap.c	2006-12-11 17:45:22.000000000 +0800
@@ -492,6 +492,7 @@ int page_mkclean(struct page *page)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(page_mkclean);
 
 /**
  * page_set_anon_rmap - setup new anonymous rmap
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/