Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Message-ID: <449f718706fd5af03190bdda986de37aa8fa14e3.camel@pengutronix.de>
Subject: Re: [PATCH v2] arm64: dts: imx8mq-kontron-pitx-imx8m: remove
 vqmmc-supply node
From:   Lucas Stach <l.stach@pengutronix.de>
To:     Heiko Thiery <heiko.thiery@gmail.com>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Fabio Estevam <festevam@gmail.com>,
        Shengjiu Wang <shengjiu.wang@nxp.com>,
        Joakim Zhang <qiangqing.zhang@nxp.com>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Michael Walle <michael@walle.cc>,
        Rob Herring <robh+dt@kernel.org>,
        NXP Linux Team <linux-imx@nxp.com>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>
Date:   Tue, 14 Sep 2021 10:20:21 +0200
In-Reply-To: <20210914072627.24173-1-heiko.thiery@gmail.com>
References: <20210914072627.24173-1-heiko.thiery@gmail.com>
Content-Type: text/plain; charset="UTF-8"
User-Agent: Evolution 3.40.4 (3.40.4-1.fc34) 
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Precedence: bulk

Am Dienstag, dem 14.09.2021 um 09:26 +0200 schrieb Heiko Thiery:
> The sw4 output (V_1V8_S0 voltage) from the PMIC is the main supply for
> the 1V8 power domain. It is not only used as supply for the eMMC.
> So this voltage can not be changed and is not allowed to switched off.
> Therefore we do not want to provide this regulator to the SDHC driver to
> control this voltage.
> 
This specific requirement should not be solved by removing the
regulator connection from the SDHCI node, but instead by constraining
the regulator voltage range to a fixed 3.3V and marking the regulator
as always-on to reflect the hardware requirements in the DT.

Also if your eMMC vqmmc is a fixed 3.3V, I don't think you need the
faster pinctrl states, as you can't use the faster pin states anyways,
as they require a 1.8V signaling voltage.

Regards,
Lucas
 
> Fixes: 5dbadc848259 ("arm64: dts: fsl: add support for Kontron pitx-imx8m board")
> Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
> ---
> 
> v2:
>  - slightly reword the commit message (thanks Michael)
>  - add Fixes tag (thanks Fabio)
> 
> 
>  arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> index f593e4ff62e1..436d98135ba9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> @@ -348,7 +348,6 @@ &usdhc1 {
>  	pinctrl-0 = <&pinctrl_usdhc1>;
>  	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
>  	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> -	vqmmc-supply = <&sw4_reg>;
>  	bus-width = <8>;
>  	non-removable;
>  	no-sd;