Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Maxime Ripard <maxime@cerno.tech>
To:     dri-devel@lists.freedesktop.org,
        Daniel Vetter <daniel.vetter@intel.com>,
        David Airlie <airlied@linux.ie>,
        Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
        Thomas Zimmermann <tzimmermann@suse.de>,
        Maxime Ripard <maxime@cerno.tech>
Cc:     Emma Anholt <emma@anholt.net>,
        linux-rpi-kernel@lists.infradead.org,
        Dave Stevenson <dave.stevenson@raspberrypi.com>,
        Phil Elwell <phil@raspberrypi.com>,
        Tim Gover <tim.gover@raspberrypi.com>,
        Dom Cobley <dom@raspberrypi.com>,
        Sam Ravnborg <sam@ravnborg.org>,
        Nicolas Saenz Julienne <nsaenz@kernel.org>,
        bcm-kernel-feedback-list@broadcom.com, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] drm/vc4: hdmi: Actually check for the connector status in hotplug
Date:   Tue, 14 Sep 2021 12:17:24 +0200
Message-Id: <20210914101724.266570-3-maxime@cerno.tech>
In-Reply-To: <20210914101724.266570-1-maxime@cerno.tech>
References: <20210914101724.266570-1-maxime@cerno.tech>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The drm_helper_hpd_irq_event() documentation states that this function
is "useful for drivers which can't or don't track hotplug interrupts for
each connector." and that "Drivers which support hotplug interrupts for
each connector individually and which have a more fine-grained detect
logic should bypass this code and directly call
drm_kms_helper_hotplug_event()". This is thus what we ended-up doing.

However, what this actually means, and is further explained in the
drm_kms_helper_hotplug_event() documentation, is that
drm_kms_helper_hotplug_event() should be called by drivers that can
track the connection status change, and if it has changed we should call
that function.

This underlying expectation we failed to provide is that the caller of
drm_kms_helper_hotplug_event() should call drm_helper_probe_detect() to
probe the new status of the connector.

Since we didn't do it, it meant that even though we were sending the
notification to user-space and the DRM clients that something changed we
never probed or updated our internal connector status ourselves.

This went mostly unnoticed since the detect callback usually doesn't
have any side-effect. Also, if we were using the DRM fbdev emulation
(which is a DRM client), or any user-space application that can deal
with hotplug events, chances are they would react to the hotplug event
by probing the connector status eventually.

However, now that we have to enable the scrambler in detect() if it was
enabled it has a side effect, and an application such as Kodi or
modetest doesn't deal with hotplug events. This resulted with a black
screen when Kodi or modetest was running when a screen was disconnected
and then reconnected, or switched off and on.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index a3dbd1fdff7d..d9e001b9314f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1578,10 +1578,11 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 static irqreturn_t vc4_hdmi_hpd_irq_thread(int irq, void *priv)
 {
 	struct vc4_hdmi *vc4_hdmi = priv;
-	struct drm_device *dev = vc4_hdmi->connector.dev;
+	struct drm_connector *connector = &vc4_hdmi->connector;
+	struct drm_device *dev = connector->dev;
 
 	if (dev && dev->registered)
-		drm_kms_helper_hotplug_event(dev);
+		drm_connector_helper_hpd_irq_event(connector);
 
 	return IRQ_HANDLED;
 }
-- 
2.31.1