Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Quan Nguyen <quan@os.amperecomputing.com>
To:     Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@aj.id.au>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc:     Open Source Submission <patches@amperecomputing.com>,
        Phong Vo <phong@os.amperecomputing.com>,
        "Thang Q . Nguyen" <thang@os.amperecomputing.com>
Subject: [PATCH v1] ARM: dts: aspeed: mtjade: Add some gpios
Date:   Fri, 17 Sep 2021 15:29:45 +0700
Message-Id: <20210917082945.19111-1-quan@os.amperecomputing.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?YaLfV5FcZ63uB/BsVgwMkPFyGY6Ypfp78hwXdXRPubmGzQFlhQBXIvhRyLG6?=
 =?us-ascii?Q?XKiQFE1jLktz7TWpDT6O4vFrlk2EUVVqUmkckFy/POC44XYKmbG67/clcH5X?=
 =?us-ascii?Q?+SI/GTpTrttuRXQVwVWyh8EU3zKTvY7lRywNQfEdU//jOHpYBlkS9dn0/n2f?=
 =?us-ascii?Q?7eWEcXcKqNULMdscjLn3VWA5lttmIfesUlD3TloZBUwXThytjC9U/wQR0S6m?=
 =?us-ascii?Q?bPD33l9KwVGD7Fna7jzDOvvr46/2uPnByxR6k26r9IxsZvoj6NWrSujcldzi?=
 =?us-ascii?Q?8AkWmjZDgcgD8/e4y4arQoPfEulx76Ap5RzeGrW1hn0dkzzjzFM2Jc/W+2Q8?=
 =?us-ascii?Q?s8TKX1SBmPRlUF4hqE4z93iippKixLvO3ZZP4D5Qgi/iawPYQAH7Owv+81Ok?=
 =?us-ascii?Q?deQFY2PrHh6lkkFBuoYnF4wc/kzkxdbIXcjtHwkl7ANHXvPXolDXwCNq0fSP?=
 =?us-ascii?Q?yqM9MMa+ZvT8tPAtCcZPVwAUUrjvV7nP80id4I0Eos0zE0cN58Y0jTDvMQO8?=
 =?us-ascii?Q?RSApP3l6MAFaXVTJ44D/mgvw6Og9nAlgTkHQJ691YpLmOf5WcgN36n6PaeRJ?=
 =?us-ascii?Q?/lNUaXINR9Uvkvum3/xHseUxhOLGvKf3xgspFJOwGQdbZX/8JQe/RNjrtqGS?=
 =?us-ascii?Q?pjEql6kzfN4CTc93YLNS4GOkxgvmScobgSRvXw8G94xpyd17Xek6btWQ08vi?=
 =?us-ascii?Q?YAPoGpPjgw9r7rmLcI95R6auOsrHkR1As9kYPTSb/KE0S++wjDsHmNfIPimp?=
 =?us-ascii?Q?+ywkR4FPLLe6Tj24G889uYUHCqEo4XJwBx9J2luzolS4PJqHny5t+/G8WcKp?=
 =?us-ascii?Q?rJpWkAnsTfVv8n0T29gci7e7iKrVf0GX4iub1MpbKTfTjIBULw4YcqfLhgm1?=
 =?us-ascii?Q?COuuZmzjnSQfjJrsq/g5OBLdDwQiEQGqhFdYfWwPDEYAG+b4or/IcRKOymU8?=
 =?us-ascii?Q?6qxbW7oMakzNsCgi9p0BdQHFQZ/ta7Nxf6iRenY9poWcsujK/tclKqdQ/8EN?=
 =?us-ascii?Q?bAfARAOijulWJ7y+1fOArkq3bLv9AwFzDBXkKHxRGYrRJ4TY1ptSyfzwM/qF?=
 =?us-ascii?Q?v/lSP9151t3Yq+17jrJi8fWDWZO9ScOcIimByBGXL+56/z28SMqww+fyF+7H?=
 =?us-ascii?Q?QnRmjSiVgMKchbfvhYRC6kGxR4lvlu8MkfwkmdoztBDBeBoGE5NvJGbjq+lg?=
 =?us-ascii?Q?lBGLBE9Ga4ln6R8j3sdexaCryZqIJQxIwQTb8suXkJtYF8ndtZDydK2B35wD?=
 =?us-ascii?Q?9lOYDZxQpEPW9hP50oZcaDo2p3+n+0BCLotlqv4nArOM8x5f7bijWBF8goEr?=
 =?us-ascii?Q?ZKprl6QG0M5rSLJBI077EVdb?=
X-OriginatorOrg: os.amperecomputing.com
X-MS-Exchange-CrossTenant-Network-Message-Id: e3f6eb6e-57a1-47c9-c02f-08d979b559e3
X-MS-Exchange-CrossTenant-AuthSource: MW2PR0102MB3482.prod.exchangelabs.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 17 Sep 2021 08:30:05.7373
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 3bc2b170-fd94-476d-b0ce-4229bdc904a7
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: 7v2Xgv+xaMsgMCvLRf5TYLb93BQwXIDYxap3qS5qWmF5yHK41wxJrzcFYEXzshjxtyT/1y7RD6X1B5oPdmJwW7D/GL2PBeAfsha/TYYqjq4=
X-MS-Exchange-Transport-CrossTenantHeadersStamped: MW2PR0102MB3546
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add S0_SCP_AUTH_FAIL, S1_SCP_AUTH_FAIL gpios to indicates firmware
authentication fail on each socket.

Add gpio RTC_BAT_SEN_EN to enable RTC battery adc sensor.

Add BMC_I2C4_O_EN gpio to go high at boot to enable access to I2C4 bus.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Nguyen <thang@os.amperecomputing.com>
---
 .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 57b0c45a2298..3515d55bd312 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -86,6 +86,18 @@ S0_cpu_fault {
 			linux,code = <ASPEED_GPIO(J, 1)>;
 		};
 
+		S0_scp_auth_fail {
+			label = "S0_SCP_AUTH_FAIL";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		S1_scp_auth_fail {
+			label = "S1_SCP_AUTH_FAIL";
+			gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 5)>;
+		};
+
 		S1_overtemp {
 			label = "S1_OVERTEMP";
 			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
@@ -590,7 +602,7 @@ &gpio {
 	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
 	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
 			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","RTC_BAT_SEN_EN","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
@@ -604,4 +616,11 @@ &gpio {
 			"S1_BMC_DDR_ADR","","","","",
 	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
 			"BMC_OCP_PG";
+
+	i2c4_o_en {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_I2C4_O_EN";
+	};
 };
-- 
2.28.0