Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Billy Tsai <billy_tsai@aspeedtech.com>
To:     <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
        <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
        <p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
        <broonie@kernel.org>, <linux-iio@vger.kernel.org>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
CC:     <BMC-SW@aspeedtech.com>
Subject: [v7 11/11] iio: adc: aspeed: Get and set trimming data.
Date:   Wed, 22 Sep 2021 16:15:20 +0800
Message-ID: <20210922081520.30580-12-billy_tsai@aspeedtech.com>
In-Reply-To: <20210922081520.30580-1-billy_tsai@aspeedtech.com>
References: <20210922081520.30580-1-billy_tsai@aspeedtech.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

The ADC controller has a trimming register for fine-tune the reference
voltage. The trimming value comes from the OTP register which will be
written during chip production. This patch will read this OTP value and
configure it to the ADC register when the ADC controller probes and using
dts property "aspeed,trim-data-valid" to determine whether to execute this
flow.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 71 ++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index e22c59f6c3d0..c7e15c0c1951 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -25,6 +25,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/driver.h>
@@ -80,6 +82,11 @@
  */
 #define ASPEED_ADC_DEF_SAMPLING_RATE	65000
 
+struct aspeed_adc_trim_locate {
+	const unsigned int offset;
+	const unsigned int field;
+};
+
 struct aspeed_adc_model_data {
 	const char *model_name;
 	unsigned int min_sampling_rate;	// Hz
@@ -90,6 +97,7 @@ struct aspeed_adc_model_data {
 	bool bat_sense_sup;
 	u8 scaler_bit_width;
 	unsigned int num_channels;
+	const struct aspeed_adc_trim_locate *trim_locate;
 };
 
 struct adc_gain {
@@ -165,6 +173,44 @@ static const struct iio_chan_spec aspeed_adc_iio_bat_channels[] = {
 	ASPEED_BAT_CHAN(7, 0x1E),
 };
 
+static int aspeed_adc_set_trim_data(struct iio_dev *indio_dev)
+{
+	struct device_node *syscon;
+	struct regmap *scu;
+	u32 scu_otp, trimming_val;
+	struct aspeed_adc_data *data = iio_priv(indio_dev);
+
+	syscon = of_find_node_by_name(NULL, "syscon");
+	if (syscon == NULL) {
+		dev_warn(data->dev, "Couldn't find syscon node\n");
+		return -EOPNOTSUPP;
+	}
+	scu = syscon_node_to_regmap(syscon);
+	if (IS_ERR(scu)) {
+		dev_warn(data->dev, "Failed to get syscon regmap\n");
+		return -EOPNOTSUPP;
+	}
+	if (data->model_data->trim_locate) {
+		if (regmap_read(scu, data->model_data->trim_locate->offset,
+				&scu_otp)) {
+			dev_warn(data->dev,
+				 "Failed to get adc trimming data\n");
+			trimming_val = 0x8;
+		} else {
+			trimming_val =
+				((scu_otp) &
+				 (data->model_data->trim_locate->field)) >>
+				__ffs(data->model_data->trim_locate->field);
+		}
+		dev_dbg(data->dev,
+			"trimming val = %d, offset = %08x, fields = %08x\n",
+			trimming_val, data->model_data->trim_locate->offset,
+			data->model_data->trim_locate->field);
+		writel(trimming_val, data->base + ASPEED_REG_COMPENSATION_TRIM);
+	}
+	return 0;
+}
+
 static int aspeed_adc_compensation(struct iio_dev *indio_dev)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
@@ -514,6 +560,13 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (of_find_property(data->dev->of_node, "aspeed,trim-data-valid",
+			     NULL)) {
+		ret = aspeed_adc_set_trim_data(indio_dev);
+		if (ret)
+			return ret;
+	}
+
 	if (of_find_property(data->dev->of_node, "aspeed,battery-sensing",
 			     NULL)) {
 		if (data->model_data->bat_sense_sup) {
@@ -590,6 +643,21 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct aspeed_adc_trim_locate ast2500_adc_trim = {
+	.offset = 0x154,
+	.field = GENMASK(31, 28),
+};
+
+static const struct aspeed_adc_trim_locate ast2600_adc0_trim = {
+	.offset = 0x5d0,
+	.field = GENMASK(3, 0),
+};
+
+static const struct aspeed_adc_trim_locate ast2600_adc1_trim = {
+	.offset = 0x5d0,
+	.field = GENMASK(7, 4),
+};
+
 static const struct aspeed_adc_model_data ast2400_model_data = {
 	.model_name = "ast2400-adc",
 	.vref_fixed_mv = 2500,
@@ -609,6 +677,7 @@ static const struct aspeed_adc_model_data ast2500_model_data = {
 	.need_prescaler = true,
 	.scaler_bit_width = 10,
 	.num_channels = 16,
+	.trim_locate = &ast2500_adc_trim,
 };
 
 static const struct aspeed_adc_model_data ast2600_adc0_model_data = {
@@ -619,6 +688,7 @@ static const struct aspeed_adc_model_data ast2600_adc0_model_data = {
 	.bat_sense_sup = true,
 	.scaler_bit_width = 16,
 	.num_channels = 8,
+	.trim_locate = &ast2600_adc0_trim,
 };
 
 static const struct aspeed_adc_model_data ast2600_adc1_model_data = {
@@ -629,6 +699,7 @@ static const struct aspeed_adc_model_data ast2600_adc1_model_data = {
 	.bat_sense_sup = true,
 	.scaler_bit_width = 16,
 	.num_channels = 8,
+	.trim_locate = &ast2600_adc1_trim,
 };
 
 static const struct of_device_id aspeed_adc_matches[] = {
-- 
2.25.1