Received: by 2002:a05:6a11:4021:0:0:0:0 with SMTP id ky33csp517632pxb; Thu, 23 Sep 2021 05:21:37 -0700 (PDT) X-Google-Smtp-Source: ABdhPJwR4wAzDDNpUwkn8gU8cBj5cMJKssoykVcmKxKeevguYj0nuGSNe3WodaowGalsgtTTAL7u X-Received: by 2002:a17:906:39d8:: with SMTP id i24mr4651269eje.49.1632399697229; Thu, 23 Sep 2021 05:21:37 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1632399697; cv=none; d=google.com; s=arc-20160816; b=JAw77kwL7qy15G9h9Ft96KtOSyj+zrxbnJWWlODJyUF7PUwgOfYNkA6b4R6kwFz+pj bxPvsXPz4eCUsKnqjhuPetCFQsrxIDn+koVmCvIduVyz4xZIsCdPxDtCoF5oZf3c/xtM HhpCGLW9oyyCt7FWgCWbRStb16FIijWnMEgjmVkJDlyjzu3YYYC4fXiPyPMsgWjHIyjv TMi8a2uFaHIEnda1nMfW5nO6jS8SLXPjGpZxS/d89a8vdwrnIjID+sX6nXn/2Hqb4vIe aLCU31qFGr3+KldQLPDqmOalXY4vBCMdVl6u8DygZfOYHpnIB3Ue2kPAuDoMAsSEBNVk 4wgA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:references:in-reply-to:message-id:date:subject :cc:to:from; bh=+FHwJM6mSYimFW0jntwLz5PdTwbfVVG0u9rf0o4tQ10=; b=Ltc2Od+gWueY5gMM4pwQud+bBqbLIApN/06VbXCh30zLysgDY1xRYL+JW733sBQltu c5+n+G7yf8PYeoWQ74tWRYzFWK3Aor47uKY597yHtg+ZhpdNFQmhyDilW7Yd2jAszqKZ +4zVo/KrB84xZZ4Yol+SaNBIH/DPcPIHMBrq6v6d7JEuOwSyCNuX0NHLjeF2odHmT7f2 DNJ2fuR/1c0bm5QYwzMAYypfgUbAdQjdbsgQ2LWRY/dsJLfQ5w8gzcnOCeHeie5qFv2x t469f2iM5AJAyp80YJD2gkkOmAy1tsvd+hifgVC3+VIvhBNj1+8UTmCkTZZduZeqXRaq Po2Q== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id d8si5303946edn.357.2021.09.23.05.21.12; Thu, 23 Sep 2021 05:21:37 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240903AbhIWMSp (ORCPT + 99 others); Thu, 23 Sep 2021 08:18:45 -0400 Received: from alexa-out.qualcomm.com ([129.46.98.28]:32195 "EHLO alexa-out.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240788AbhIWMSZ (ORCPT ); Thu, 23 Sep 2021 08:18:25 -0400 Received: from ironmsg07-lv.qualcomm.com ([10.47.202.151]) by alexa-out.qualcomm.com with ESMTP; 23 Sep 2021 05:16:53 -0700 X-QCInternal: smtphost Received: from ironmsg01-blr.qualcomm.com ([10.86.208.130]) by ironmsg07-lv.qualcomm.com with ESMTP/TLS/AES256-SHA; 23 Sep 2021 05:16:51 -0700 X-QCInternal: smtphost Received: from rajpat-linux.qualcomm.com ([10.206.21.0]) by ironmsg01-blr.qualcomm.com with ESMTP; 23 Sep 2021 17:46:29 +0530 Received: by rajpat-linux.qualcomm.com (Postfix, from userid 2344945) id ACF5D2160D; Thu, 23 Sep 2021 17:46:28 +0530 (IST) From: Rajesh Patil To: Andy Gross , Bjorn Andersson , Rob Herring Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, rnayak@codeaurora.org, saiprakash.ranjan@codeaurora.org, msavaliy@qti.qualcomm.com, skakit@codeaurora.org, sboyd@kernel.org, mka@chromium.org, dianders@chromium.org, Roja Rani Yarubandi , Rajesh Patil Subject: [PATCH V10 7/8] arm64: dts: sc7280: Add QUPv3 wrapper_1 nodes Date: Thu, 23 Sep 2021 17:46:17 +0530 Message-Id: <1632399378-12229-8-git-send-email-rajpat@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1632399378-12229-1-git-send-email-rajpat@codeaurora.org> References: <1632399378-12229-1-git-send-email-rajpat@codeaurora.org> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Roja Rani Yarubandi Add QUPv3 wrapper_1 DT nodes for SC7280 SoC. Signed-off-by: Roja Rani Yarubandi Signed-off-by: Rajesh Patil Reviewed-by: Matthias Kaehlcke Reviewed-by: Stephen Boyd --- Changes in V10: - As per Stephen's comments,Removed "<&qup_spiN_cs_gpio>" in spi all ports - Added "status=okay" in qupv3_id_1 for sc7280-idp board file because EC and TPM are using "qupv3_id_1" node. Changes in V9: - As per Stephen's comments, changed node names to "qup_spi8_cs_gpio: qup-spi8-cs-gpio" because node names should have dashes instead of underscores. Changes in V8: - No changes Changes in V7: - As per Stephen's comments, Removed "status=okay" in qupv3_id_1 for sc7280-idp board file Changes in V5: - As per Matthias' comments, Add QUPv3 wrapper_1 nodes arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 4 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 749 +++++++++++++++++++++++++++++++ 2 files changed, 753 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 52638e2..f2dc9f2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -229,6 +229,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 3254de65..c26647a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -981,6 +981,435 @@ }; }; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + cnoc2: interconnect@1500000 { reg = <0 0x01500000 0 0x1000>; compatible = "qcom,sc7280-cnoc2"; @@ -2039,6 +2468,46 @@ function = "qup07"; }; + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + qup_spi0_data_clk: qup-spi0-data-clk { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; @@ -2159,6 +2628,126 @@ function = "gpio"; }; + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; + qup_uart0_cts: qup-uart0-cts { pins = "gpio0"; function = "qup00"; @@ -2399,6 +2988,166 @@ bias-bus-hold; }; }; + + qup_uart8_cts: qup-uart8-cts { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx { + pins = "gpio63"; + function = "qup17"; + }; }; apps_smmu: iommu@15000000 { -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation