Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753257AbWLOTW2 (ORCPT ); Fri, 15 Dec 2006 14:22:28 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753263AbWLOTW1 (ORCPT ); Fri, 15 Dec 2006 14:22:27 -0500 Received: from smtp-vbr6.xs4all.nl ([194.109.24.26]:1164 "EHLO smtp-vbr6.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753257AbWLOTWW (ORCPT ); Fri, 15 Dec 2006 14:22:22 -0500 Date: Fri, 15 Dec 2006 20:21:46 +0100 From: thunder7@xs4all.nl To: Neil Brown Cc: Jurriaan , Andrew Morton , linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org Subject: Re: md patches in -mm Message-ID: <20061215192146.GA3616@amd64.of.nowhere> Reply-To: Jurriaan References: <20061204203410.6152efec.akpm@osdl.org> <17780.63770.228659.234534@cse.unsw.edu.au> <20061205061623.GA13749@amd64.of.nowhere> <20061205062142.GA14784@amd64.of.nowhere> <20061204224323.2e5d0494.akpm@osdl.org> <20061205105928.GA6482@amd64.of.nowhere> <17782.28505.303064.964551@cse.unsw.edu.au> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <17782.28505.303064.964551@cse.unsw.edu.au> User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 86496 Lines: 3035 From: Neil Brown Date: Wed, Dec 06, 2006 at 06:20:57PM +1100 > i.e. current -mm is good for 2.6.20 (though I have a few other little > things I'll be sending in soon, they aren't related to the raid6 > problem). > 2.6.20-rc1-mm1 doesn't boot on my box, due to the fact that e2fsck gives Buffer I/O error on device /dev/md0, logical block 0 and after that 1,2,3,4,5,6,7,8,9, at which points it complains it can't read the superblock. It seems the raid6 problem hasn't gone away completely, after all. Find below: dmesg, /proc/mdstat and .config. Good luck! Jurriaan Linux version 2.6.20-rc1-mm1 (jurriaan@middle) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Dec 15 20:07:38 CET 2006 Command line: root=/dev/md2 video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Entering add_active_range(0, 0, 156) 0 entries of 256 used Entering add_active_range(0, 256, 786416) 1 entries of 256 used Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used end_pfn_map = 1310720 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7d30 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfff9900 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x00000000bfff9b80 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9cc0 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9840 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 156) 0 entries of 256 used Entering add_active_range(0, 256, 786416) 1 entries of 256 used Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used sizeof(struct page) = 56 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1310720 early_node_map[3] active PFN ranges 0: 0 -> 156 0: 256 -> 786416 0: 1048576 -> 1310720 On node 0 totalpages: 1048460 Node 0 memmap at 0xffff810001000000 size 73400320 first pfn 0xffff810001000000 DMA zone: 56 pages used for memmap DMA zone: 1873 pages reserved DMA zone: 2067 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 768040 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009c000 - 000000000009d000 Nosave address range: 000000000009d000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Nosave address range: 00000000bfff0000 - 00000000bfff3000 Nosave address range: 00000000bfff3000 - 00000000c0000000 Nosave address range: 00000000c0000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 32384 bytes of per cpu data Built 1 zonelists. Total pages: 1028667 Kernel command line: root=/dev/md2 video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ 8000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Memory: 4042548k/5242880k available (3978k kernel code, 151080k reserved, 2440k data, 284k init) Calibrating delay using timer specific routine.. 4828.64 BogoMIPS (lpj=8044237) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 44k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12564458 Detected 12.564 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4826.47 BogoMIPS (lpj=8040761) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -80 cycles, maxerr 624 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2412.373 MHz processor. migration_cost=215 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000-efffffff PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] Generic PHY: Registered new driver SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d900e000-d900e7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d900d000-d900d7ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Bridge: 0000:00:09.0 IO window: 6000-afff MEM window: d8000000-d9ffffff PREFETCH window: da100000-da1fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: d0000000-d7ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O]. io scheduler noop registered io scheduler cfq registered (default) PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Linking AER extended capability on 0000:00:0e.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 nvidiafb: Device ID: 10de0141 nvidiafb: CRTC0 analog found nvidiafb: CRTC1 analog found nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON Console: switching to colour frame buffer device 160x66 nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0xC0000000) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] Using specific hotkey driver lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 skge 1.9 addr 0xd9008000 irq 17 chip Yukon-Lite rev 9 skge eth0: addr 00:15:f2:20:e6:69 Marvell 88E1101: Registered new driver Davicom DM9161E: Registered new driver Davicom DM9131: Registered new driver Cicada Cis8204: Registered new driver Cicada Cis8201: Registered new driver LXT970: Registered new driver LXT971: Registered new driver QS6612: Registered new driver forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 Linux Tulip driver version 1.1.14 (May 11, 2002) ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1. eth2: Lite-On 82c168 PNIC rev 32 at Port 0x8800, 00:A0:CC:21:89:0C, IRQ 17. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... hda: WDC WD2000JB-32EVA0, ATA DISK drive ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000738f5d] hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c014100f4bf] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD2000JB-00FUA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 HPT374: IDE controller at PCI slot 0000:05:06.0 ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 HPT374: chipset revision 7 HPT374: DPLL base: 48 MHz, f_CNT: 148, assuming 33 MHz PCI HPT374: using 66 MHz DPLL clock HPT374: 100% native mode on irq 16 ide2: BM-DMA at 0x7000-0x7007, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0x7008-0x700f, BIOS settings: hdg:pio, hdh:pio ACPI: PCI Interrupt 0000:05:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 HPT374: no clock data saved by BIOS HPT374: DPLL base: 48 MHz, f_CNT: 123, assuming 33 MHz PCI HPT374: using 66 MHz DPLL clock ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:DMA, hdj:pio ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide2... hde: WDC WD2500JB-00FUA0, ATA DISK drive ide2 at 0x6000-0x6007,0x6402 on irq 16 Probing IDE interface ide3... Probing IDE interface ide4... hdi: ST3300831A, ATA DISK drive ide4 at 0x7400-0x7407,0x7802 on irq 16 Probing IDE interface ide5... hda: max request size: 512KiB hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hdc: max request size: 512KiB hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > hde: max request size: 512KiB hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hdi: max request size: 512KiB hdi: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) hdi: cache flushes supported hdi: hdi1 hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 RocketRAID 3xxx SATA Controller driver v1.0 (060426) sata_sil 0000:05:0a.0: version 2.0 ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix ata1: SATA max UDMA/100 cmd 0xFFFFC200100BA080 ctl 0xFFFFC200100BA08A bmdma 0xFFFFC200100BA000 irq 19 ata2: SATA max UDMA/100 cmd 0xFFFFC200100BA0C0 ctl 0xFFFFC200100BA0CA bmdma 0xFFFFC200100BA008 irq 19 ata3: SATA max UDMA/100 cmd 0xFFFFC200100BA280 ctl 0xFFFFC200100BA28A bmdma 0xFFFFC200100BA200 irq 19 ata4: SATA max UDMA/100 cmd 0xFFFFC200100BA2C0 ctl 0xFFFFC200100BA2CA bmdma 0xFFFFC200100BA208 irq 19 scsi0 : sata_sil ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : sata_sil ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/100 scsi2 : sata_sil ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/100 scsi3 : sata_sil ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata4.00: ata4: dev 0 multi count 16 ata4.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.02 PQ: 0 ANSI: 5 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd sd 3:0:0:0: Attached scsi generic sg3 type 0 sata_nv 0000:00:07.0: version 3.3 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 ata5: SATA max UDMA/133 cmd 0xFFFFC200100BC480 ctl 0xFFFFC200100BC4A0 bmdma 0xD800 irq 22 ata6: SATA max UDMA/133 cmd 0xFFFFC200100BC580 ctl 0xFFFFC200100BC5A0 bmdma 0xD808 irq 22 scsi4 : sata_nv ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32) ata5.00: ata5: dev 0 multi count 1 ata5.00: configured for UDMA/133 scsi5 : sata_nv ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32) ata6.00: ata6: dev 0 multi count 1 ata6.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 ata5: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sd 4:0:0:0: Attached scsi disk sde sd 4:0:0:0: Attached scsi generic sg4 type 0 scsi 5:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 ata6: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 5:0:0:0: Attached scsi disk sdf sd 5:0:0:0: Attached scsi generic sg5 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 ata7: SATA max UDMA/133 cmd 0xFFFFC200100BE480 ctl 0xFFFFC200100BE4A0 bmdma 0xC400 irq 21 ata8: SATA max UDMA/133 cmd 0xFFFFC200100BE580 ctl 0xFFFFC200100BE5A0 bmdma 0xC408 irq 21 scsi6 : sata_nv ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32) ata7.00: ata7: dev 0 multi count 1 ata7.00: configured for UDMA/133 scsi7 : sata_nv ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata8.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32) ata8.00: ata8: dev 0 multi count 1 ata8.00: configured for UDMA/133 scsi 6:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 ata7: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sdg2 sd 6:0:0:0: Attached scsi disk sdg sd 6:0:0:0: Attached scsi generic sg6 type 0 scsi 7:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 ata8: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sd 7:0:0:0: Attached scsi disk sdh sd 7:0:0:0: Attached scsi generic sg7 type 0 video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized WARNING: The dv1394 driver is unsupported and will be removed from Linux soon. Use raw1394 instead. ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20-rc1-mm1 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 23, io mem 0xda004000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20-rc1-mm1 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 input: PC Speaker as /class/input/input3 logips2pp: Detected unknown logitech mouse model 1 input: ImPS/2 Logitech Wheel Mouse as /class/input/input4 i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int64x1 2227 MB/s raid6: int64x2 3021 MB/s raid6: int64x4 2868 MB/s raid6: int64x8 1996 MB/s raid6: sse2x1 2547 MB/s raid6: sse2x2 3671 MB/s raid6: sse2x4 4130 MB/s raid6: using algorithm sse2x4 (4130 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 7706.400 MB/sec raid5: using function: generic_sse (7706.400 MB/sec) nf_conntrack version 0.5.0 (8192 buckets, 65536 max) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 8 NET: Registered protocol family 20 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) md: Autodetecting RAID arrays. md: autorun ... md: considering sdh1 ... md: adding sdh1 ... md: adding sdg1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: hdc9 has different UUID to sdh1 md: hdc8 has different UUID to sdh1 md: hdc7 has different UUID to sdh1 md: hdc6 has different UUID to sdh1 md: hdc5 has different UUID to sdh1 md: hda9 has different UUID to sdh1 md: hda8 has different UUID to sdh1 md: hda7 has different UUID to sdh1 md: hda6 has different UUID to sdh1 md: hda5 has different UUID to sdh1 md: created md0 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid5: device sdh1 operational as raid disk 1 raid5: device sdg1 operational as raid disk 0 raid5: device sdf1 operational as raid disk 5 raid5: device sde1 operational as raid disk 6 raid5: device sdd1 operational as raid disk 7 raid5: device sdc1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: device sda1 operational as raid disk 4 raid5: allocated 8462kB for md0 raid5: raid level 6 set md0 active with 8 out of 8 devices, algorithm 2 RAID5 conf printout: --- rd:8 wd:8 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdh1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdc1 disk 4, o:1, dev:sda1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sde1 disk 7, o:1, dev:sdd1 md0: bitmap initialized from disk: read 15/15 pages, set 1 bits, status: 0 created bitmap (233 pages) for device md0 md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sde1, disabling device. Operation continuing on 7 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdg1, disabling device. Operation continuing on 6 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdf1, disabling device. Operation continuing on 5 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdc1, disabling device. Operation continuing on 4 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdb1, disabling device. Operation continuing on 3 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdh1, disabling device. Operation continuing on 2 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sdd1, disabling device. Operation continuing on 1 devices md: super_written gets error=-5, uptodate=0 raid5: Disk failure on sda1, disabling device. Operation continuing on 0 devices md: considering hdc9 ... md: adding hdc9 ... md: hdc8 has different UUID to hdc9 md: hdc7 has different UUID to hdc9 md: hdc6 has different UUID to hdc9 md: hdc5 has different UUID to hdc9 md: adding hda9 ... md: hda8 has different UUID to hdc9 md: hda7 has different UUID to hdc9 md: hda6 has different UUID to hdc9 RAID5 conf printout: --- rd:8 wd:0 disk 0, o:0, dev:sdg1 disk 1, o:0, dev:sdh1 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 5, o:0, dev:sdf1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 md: hda5 has different UUID to hdc9 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md4: bitmap initialized from disk: read 10/10 pages, set 49 bits, status: 0 created bitmap (156 pages) for device md4 RAID5 conf printout: --- rd:8 wd:0 disk 0, o:0, dev:sdg1 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 5, o:0, dev:sdf1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 0, o:0, dev:sdg1 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 5, o:0, dev:sdf1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 md: considering hdc8 ... md: adding hdc8 ... md: hdc7 has different UUID to hdc8 md: hdc6 has different UUID to hdc8 md: hdc5 has different UUID to hdc8 md: adding hda8 ... md: hda7 has different UUID to hdc8 md: hda6 has different UUID to hdc8 md: hda5 has different UUID to hdc8 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 5, o:0, dev:sdf1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 5, o:0, dev:sdf1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 md3: bitmap initialized from disk: read 8/8 pages, set 6 bits, status: 0 created bitmap (123 pages) for device md3 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 6, o:0, dev:sde1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 7, o:0, dev:sdd1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 disk 7, o:0, dev:sdd1 md: considering hdc7 ... md: adding hdc7 ... md: hdc6 has different UUID to hdc7 md: hdc5 has different UUID to hdc7 md: adding hda7 ... md: hda6 has different UUID to hdc7 md: hda5 has different UUID to hdc7 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 3, o:0, dev:sdc1 disk 4, o:0, dev:sda1 RAID5 conf printout: --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 4, o:0, dev:sda1 RAID5 conf printout: md2: bitmap initialized from disk: read 8/8 pages, set 87 bits, status: 0 created bitmap (123 pages) for device md2 --- rd:8 wd:0 disk 2, o:0, dev:sdb1 disk 4, o:0, dev:sda1 RAID5 conf printout: --- rd:8 wd:0 disk 4, o:0, dev:sda1 RAID5 conf printout: --- rd:8 wd:0 disk 4, o:0, dev:sda1 md: considering hdc6 ... md: adding hdc6 ... md: hdc5 has different UUID to hdc6 md: adding hda6 ... md: hda5 has different UUID to hdc6 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors RAID5 conf printout: --- rd:8 wd:0 md1: bitmap initialized from disk: read 12/12 pages, set 76 bits, status: 0 created bitmap (184 pages) for device md1 md: considering hdc5 ... md: adding hdc5 ... md: adding hda5 ... md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md5: bitmap initialized from disk: read 9/9 pages, set 0 bits, status: 0 created bitmap (129 pages) for device md5 md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 284k freed Adding 4200888k swap on /dev/md5. Priority:-1 extents:1 across:4200888k EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on md2, internal journal i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-4: nForce2 SMBus adapter at 0x4c40 it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 Installing spdif_bug patch: Audigy 2 ZS [2001] Buffer I/O error on device md0, logical block 0 Buffer I/O error on device md0, logical block 1 Buffer I/O error on device md0, logical block 2 Buffer I/O error on device md0, logical block 3 Buffer I/O error on device md0, logical block 4 Buffer I/O error on device md0, logical block 5 Buffer I/O error on device md0, logical block 6 Buffer I/O error on device md0, logical block 7 Buffer I/O error on device md0, logical block 8 Buffer I/O error on device md0, logical block 9 Reducing readahead size to 256K EXT3-fs: unable to read superblock Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] md5 : active raid1 hdc5[1] hda5[0] 4200896 blocks [2/2] [UU] bitmap: 0/129 pages [0KB], 16KB chunk md1 : active raid1 hdc6[0] hda6[1] 6008192 blocks [2/2] [UU] bitmap: 0/184 pages [0KB], 16KB chunk md2 : active raid1 hdc7[0] hda7[1] 8008256 blocks [2/2] [UU] bitmap: 0/123 pages [0KB], 32KB chunk md3 : active raid1 hdc8[0] hda8[1] 8008256 blocks [2/2] [UU] bitmap: 0/123 pages [0KB], 32KB chunk md4 : active raid1 hdc9[0] hda9[1] 162834688 blocks [2/2] [UU] bitmap: 0/156 pages [0KB], 512KB chunk md0 : active raid6 sdh1[1] sdg1[0] sdf1[5] sde1[6] sdd1[7] sdc1[3] sdb1[2] sda1[4] 1465175424 blocks level 6, 64k chunk, algorithm 2 [8/8] [UUUUUUUU] bitmap: 0/233 pages [0KB], 512KB chunk unused devices: /dev/md0: Version : 00.90.03 Creation Time : Fri Feb 3 19:52:27 2006 Raid Level : raid6 Array Size : 1465175424 (1397.30 GiB 1500.34 GB) Device Size : 244195904 (232.88 GiB 250.06 GB) Raid Devices : 8 Total Devices : 8 Preferred Minor : 0 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Dec 15 20:14:55 2006 State : active Active Devices : 8 Working Devices : 8 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K UUID : 128dc711:3f60812f:79b28619:8d0aa46d Events : 0.55004 Number Major Minor RaidDevice State 0 8 97 0 active sync /dev/sdg1 1 8 113 1 active sync /dev/sdh1 2 8 17 2 active sync /dev/sdb1 3 8 33 3 active sync /dev/sdc1 4 8 1 4 active sync /dev/sda1 5 8 81 5 active sync /dev/sdf1 6 8 65 6 active sync /dev/sde1 7 8 49 7 active sync /dev/sdd1 # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20-rc1-mm1 # Fri Dec 15 19:57:58 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SWAP_PREFETCH=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_ADAPTIVE_READAHEAD=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_REORDER=y CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_VIDEO is not set CONFIG_ACPI_HOTKEY=y CONFIG_ACPI_FAN=m # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_SONY is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=m # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCI_DOMAINS is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # # IP: Virtual Server Configuration # CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y # CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set CONFIG_NF_CONNTRACK_ENABLED=y CONFIG_NF_CONNTRACK_SUPPORT=y # CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=y # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CONNTRACK_AMANDA is not set # CONFIG_NF_CONNTRACK_FTP is not set # CONFIG_NF_CONNTRACK_H323 is not set # CONFIG_NF_CONNTRACK_IRC is not set # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_PPTP is not set # CONFIG_NF_CONNTRACK_SIP is not set # CONFIG_NF_CONNTRACK_TFTP is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # # CONFIG_NF_CONNTRACK_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_NF_CONNTRACK_IPV6 is not set # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set # CONFIG_ATM_LANE is not set # CONFIG_ATM_BR2684 is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set CONFIG_NET_ESTIMATOR=y # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set CONFIG_FIB_RULES=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_SERIAL=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # # CONFIG_IBM_ASM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_MSI_LAPTOP is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=12 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_HPTIOP=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set CONFIG_SATA_NV=y # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set CONFIG_SATA_INTEL_COMBINED=y CONFIG_SATA_ACPI=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y # CONFIG_MD_RAID5_RESHAPE is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set CONFIG_IEEE1394_OUI_DB=y CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=y CONFIG_IEEE1394_SBP2=y # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=y CONFIG_IEEE1394_RAWIO=y # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # ARCnet devices # CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m # CONFIG_ARCNET_CAP is not set CONFIG_ARCNET_COM90xx=m CONFIG_ARCNET_COM90xxIO=m CONFIG_ARCNET_RIM_I=m CONFIG_ARCNET_COM20020=m CONFIG_ARCNET_COM20020_PCI=m # # PHY device support # CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_QSEMI_PHY=y CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set CONFIG_SKGE=y # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # # ATM drivers # # CONFIG_ATM_DUMMY is not set # CONFIG_ATM_TCP is not set # CONFIG_ATM_LANAI is not set # CONFIG_ATM_ENI is not set # CONFIG_ATM_FIRESTREAM is not set # CONFIG_ATM_ZATM is not set # CONFIG_ATM_IDT77252 is not set # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E_MAYBE is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_SC520_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m # CONFIG_IBMASR is not set CONFIG_WAFER_WDT=m # CONFIG_I6300ESB_WDT is not set CONFIG_I8XX_TCO=m # CONFIG_ITCO_WDT is not set CONFIG_SC1200_WDT=m # CONFIG_PC87413_WDT is not set CONFIG_60XX_WDT=m # CONFIG_SBC8360_WDT is not set CONFIG_CPU5_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m # CONFIG_W83697HF_WDT is not set CONFIG_W83877F_WDT=m # CONFIG_W83977F_WDT is not set CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_INTEL is not set CONFIG_HW_RANDOM_AMD=y # CONFIG_HW_RANDOM_GEODE is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_K8TEMP=y CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_PC87360=m # CONFIG_SENSORS_PC87427 is not set CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m # CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_DEVICE=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_DEVICE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frambuffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set CONFIG_FONT_10x18=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # SoC audio support # # CONFIG_SND_SOC is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m # # HID Devices # CONFIG_HID=y # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GOTEMP is not set # # USB DSL modem support # # CONFIG_USB_ATM is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # # RTC drivers # CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_DS1307=m # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set CONFIG_RTC_DRV_DS1672=m # CONFIG_RTC_DRV_DS1742 is not set CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_M48T86=m # CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support # # CONFIG_DMA_ENGINE is not set # # DMA Clients # # # DMA Devices # # # Auxiliary Display support # # CONFIG_KS0108 is not set # # Virtualization # # CONFIG_KVM is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISER4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=y # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager # # CONFIG_DLM is not set # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y CONFIG_UNWIND_INFO=y # CONFIG_STACK_UNWIND is not set # CONFIG_PROFILE_LIKELY is not set # CONFIG_FORCED_INLINING is not set # CONFIG_DEBUG_SYNCHRO_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_INTEGRITY is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FS_CAPABILITIES is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y -- I'd like to, but there are important world issues that need worrying about. Debian (Unstable) GNU/Linux 2.6.19-rc5-mm1 2x4826 bogomips load 6.29 the Jack Vance Integral Edition: http://www.integralarchive.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/