Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sergio Paracuellos <sergio.paracuellos@gmail.com>
To:     tsbogend@alpha.franken.de
Cc:     robh@kernel.org, arnd@arndb.de, catalin.marinas@arm.com,
        Liviu.Dudau@arm.com, bhelgaas@google.com, matthias.bgg@gmail.com,
        gregkh@linuxfoundation.org, linux-mips@vger.kernel.org,
        linux-pci@vger.kernel.org, linux-staging@lists.linux.dev,
        neil@brown.name, linux-kernel@vger.kernel.org
Subject: [PATCH 0/6] MIPS: ralink: fix PCI IO resources
Date:   Fri, 24 Sep 2021 23:11:33 +0200
Message-Id: <20210924211139.3477-1-sergio.paracuellos@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

MIPs ralink need a special tratement regarding the way it handles PCI IO
resources. On MIPS I/O ports are memory mapped, so we access them using normal
load/store instructions. MIPS 'plat_mem_setup()' function does a call to
'set_io_port_base(KSEG1)'. There, variable 'mips_io_port_base'
is set then using this address which is a virtual address to which all
ports are being mapped. Ralink I/O space has a mapping of bus address
equal to the window into the mmio space, with an offset of IO start range
cpu address. This means that to have this working we need:
- linux port numbers in the range 0-0xffff.
- pci port numbers in the range 0-0xffff.
- io_offset being zero.

These means at the end to have bus address 0 mapped to IO range cpu address.
We need a way of properly set 'mips_io_port_base' with a virtually mapped
value of the IO cpu address.

This series do the following approach:
1) Revert two bad commit from a previous attempt of make this work [0].
2) Set PCI_IOBASE to mips 'mips_io_port_base'.
3) Allow architecture dependent 'pci_remap_iospace'.
4) Implement 'pci_remap_iospace' for MIPS.
5) Be sure IOBASE address for IO window is set with correct value.

More context about this series appoach in this mail thread [1].

Thanks in advance for your time.

[0]: https://www.spinics.net/lists/kernel/msg4051474.html
[1]: https://lkml.org/lkml/2021/9/22/6

Sergio Paracuellos (6):
  Revert "MIPS: ralink: don't define PC_IOBASE but increase
    IO_SPACE_LIMIT"
  Revert "staging: mt7621-pci: set end limit for 'ioport_resource'"
  MIPS: ralink: set PCI_IOBASE to 'mips_io_port_base'
  PCI: allow architecture specific implementation of pci_remap_iospace()
  MIPS: implement architecture dependent 'pci_remap_iospace()'
  staging: mt7621-pci: properly adjust base address for the IO window

 arch/mips/include/asm/mach-ralink/spaces.h | 4 +++-
 arch/mips/include/asm/pci.h                | 2 ++
 arch/mips/pci/pci-generic.c                | 9 +++++++++
 drivers/pci/pci.c                          | 2 ++
 drivers/staging/mt7621-pci/pci-mt7621.c    | 4 +---
 5 files changed, 17 insertions(+), 4 deletions(-)

-- 
2.25.1