Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sergio Paracuellos <sergio.paracuellos@gmail.com>
To:     tsbogend@alpha.franken.de
Cc:     robh@kernel.org, arnd@arndb.de, catalin.marinas@arm.com,
        Liviu.Dudau@arm.com, bhelgaas@google.com, matthias.bgg@gmail.com,
        gregkh@linuxfoundation.org, linux-mips@vger.kernel.org,
        linux-pci@vger.kernel.org, linux-staging@lists.linux.dev,
        neil@brown.name, linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/6] staging: mt7621-pci: properly adjust base address for the IO window
Date:   Sat, 25 Sep 2021 22:32:24 +0200
Message-Id: <20210925203224.10419-7-sergio.paracuellos@gmail.com>
In-Reply-To: <20210925203224.10419-1-sergio.paracuellos@gmail.com>
References: <20210925203224.10419-1-sergio.paracuellos@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The value to adjust in the bridge register RALINK_PCI_IOBASE must take into
account the raw value from DT, not only the translated linux port number.
As long as io_offset is zero, the two are the same, but if you were to use
multiple host bridge in the system, or pick a different bus address in DT,
you can have a nonzero io_offset. At this means to take into account the
bus address which is used to calculate this offset, substracting it from
the IO resource start address.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-pci/pci-mt7621.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 6acfc94a16e7..503cb1fca2e0 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -482,7 +482,7 @@ static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
 
 	/* Setup MEMWIN and IOWIN */
 	pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
-	pcie_write(pcie, entry->res->start, RALINK_PCI_IOBASE);
+	pcie_write(pcie, entry->res->start - entry->offset, RALINK_PCI_IOBASE);
 
 	list_for_each_entry(port, &pcie->ports, list) {
 		if (port->enabled) {
-- 
2.25.1