Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Chia-Wei Wang <chiawei_wang@aspeedtech.com>
To:     <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <openbmc@lists.ozlabs.org>
CC:     <osk@google.com>
Subject: [PATCH v7 2/5] dt-bindings: mfd: aspeed-lpc: Convert to YAML schema
Date:   Mon, 27 Sep 2021 10:30:50 +0800
Message-ID: <20210927023053.6728-3-chiawei_wang@aspeedtech.com>
In-Reply-To: <20210927023053.6728-1-chiawei_wang@aspeedtech.com>
References: <20210927023053.6728-1-chiawei_wang@aspeedtech.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Convert the bindings of Aspeed LPC from text file into YAML schema.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
---
 .../devicetree/bindings/mfd/aspeed-lpc.txt    | 157 ---------------
 .../devicetree/bindings/mfd/aspeed-lpc.yaml   | 188 ++++++++++++++++++
 2 files changed, 188 insertions(+), 157 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml

diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
deleted file mode 100644
index 936aa108eab4..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-======================================================================
-Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
-======================================================================
-
-The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
-peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
-primary use case of the Aspeed LPC controller is as a slave on the bus
-(typically in a Baseboard Management Controller SoC), but under certain
-conditions it can also take the role of bus master.
-
-The LPC controller is represented as a multi-function device to account for the
-mix of functionality, which includes, but is not limited to:
-
-* An IPMI Block Transfer[2] Controller
-
-* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
-  physical properties of some LPC pins, configuration of serial IRQs, and
-  APB-to-LPC bridging amonst other functions.
-
-* An LPC Host Interface Controller: Manages functions exposed to the host such
-  as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-  management and bus snoop configuration.
-
-* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
-  hardware management protocols for handover between the host and baseboard
-  management controller.
-
-Additionally the state of the LPC controller influences the pinmux
-configuration, therefore the host portion of the controller is exposed as a
-syscon as a means to arbitrate access.
-
-[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
-[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
-[2] https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
-[3] https://en.wikipedia.org/wiki/Super_I/O
-
-Required properties
-===================
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-v2", "simple-mfd", "syscon"
-		"aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"
-		"aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"
-
-- reg:		contains the physical address and length values of the Aspeed
-                LPC memory region.
-
-- #address-cells: <1>
-- #size-cells:	<1>
-- ranges:	Maps 0 to the physical address and length of the LPC memory
-                region
-
-Example:
-
-lpc: lpc@1e789000 {
-	compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
-	reg = <0x1e789000 0x1000>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0x1e789000 0x1000>;
-
-	lpc_snoop: lpc-snoop@0 {
-		compatible = "aspeed,ast2600-lpc-snoop";
-		reg = <0x0 0x80>;
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-		snoop-ports = <0x80>;
-	};
-};
-
-
-LPC Host Interface Controller
--------------------
-
-The LPC Host Interface Controller manages functions exposed to the host such as
-LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-management and bus snoop configuration.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-ctrl";
-		"aspeed,ast2500-lpc-ctrl";
-		"aspeed,ast2600-lpc-ctrl";
-
-- reg:		contains offset/length values of the host interface controller
-		memory regions
-
-- clocks:	contains a phandle to the syscon node describing the clocks.
-		There should then be one cell representing the clock to use
-
-Optional properties:
-
-- memory-region: A phandle to a reserved_memory region to be used for the LPC
-		to AHB mapping
-
-- flash:	A phandle to the SPI flash controller containing the flash to
-		be exposed over the LPC to AHB mapping
-
-Example:
-
-lpc_ctrl: lpc-ctrl@80 {
-	compatible = "aspeed,ast2500-lpc-ctrl";
-	reg = <0x80 0x80>;
-	clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-	memory-region = <&flash_memory>;
-	flash = <&spi>;
-};
-
-LPC Host Controller
--------------------
-
-The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
-between the host and the baseboard management controller. The registers exist
-in the "host" portion of the Aspeed LPC controller, which must be the parent of
-the LPC host controller node.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lhc";
-		"aspeed,ast2500-lhc";
-		"aspeed,ast2600-lhc";
-
-- reg:		contains offset/length values of the LHC memory regions. In the
-		AST2400 and AST2500 there are two regions.
-
-Example:
-
-lhc: lhc@a0 {
-	compatible = "aspeed,ast2500-lhc";
-	reg = <0xa0 0x24 0xc8 0x8>;
-};
-
-LPC reset control
------------------
-
-The UARTs present in the ASPEED SoC can have their resets tied to the reset
-state of the LPC bus. Some systems may chose to modify this configuration.
-
-Required properties:
-
- - compatible:		One of:
-			"aspeed,ast2600-lpc-reset";
-			"aspeed,ast2500-lpc-reset";
-			"aspeed,ast2400-lpc-reset";
-
- - reg:			offset and length of the IP in the LHC memory region
- - #reset-controller	indicates the number of reset cells expected
-
-Example:
-
-lpc_reset: reset-controller@98 {
-        compatible = "aspeed,ast2500-lpc-reset";
-        reg = <0x98 0x4>;
-        #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
new file mode 100644
index 000000000000..03d417762752
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Low Pin Count (LPC) Bus Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+  peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+  primary use case of the Aspeed LPC controller is as a slave on the bus
+  (typically in a Baseboard Management Controller SoC), but under certain
+  conditions it can also take the role of bus master.
+
+  The LPC controller is represented as a multi-function device to account for the
+  mix of functionality, which includes, but is not limited to
+
+  * An IPMI Block Transfer[2] Controller
+
+  * An LPC Host Interface Controller manages functions exposed to the host such
+    as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+    management and bus snoop configuration.
+
+  * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
+    hardware management protocols for handover between the host and baseboard
+    management controller.
+
+  Additionally the state of the LPC controller influences the pinmux
+  configuration, therefore the host portion of the controller is exposed as a
+  syscon as a means to arbitrate access.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-lpc-v2
+          - aspeed,ast2500-lpc-v2
+          - aspeed,ast2600-lpc-v2
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^lpc-ctrl@[0-9a-f]+$":
+    type: object
+
+    description: |
+      The LPC Host Interface Controller manages functions exposed to the host such as
+      LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management
+      and bus snoop configuration.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-ctrl
+              - aspeed,ast2500-lpc-ctrl
+              - aspeed,ast2600-lpc-ctrl
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description: handle to memory reservation for the LPC to AHB mapping region
+
+      flash:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping
+
+    required:
+      - compatible
+      - clocks
+
+  "^reset-controller@[0-9a-f]+$":
+    type: object
+
+    description:
+      The UARTs present in the ASPEED SoC can have their resets tied to the reset
+      state of the LPC bus. Some systems may chose to modify this configuration
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-reset
+              - aspeed,ast2500-lpc-reset
+              - aspeed,ast2600-lpc-reset
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+
+  "^lpc-snoop@[0-9a-f]+$":
+    type: object
+
+    description:
+      The LPC snoop interface allows the BMC to listen on and record the data
+      bytes written by the Host to the targeted LPC I/O pots.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-snoop
+              - aspeed,ast2500-lpc-snoop
+              - aspeed,ast2600-lpc-snoop
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      snoop-ports:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: The LPC I/O ports to snoop
+
+    required:
+      - compatible
+      - interrupts
+      - snoop-ports
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        lpc_ctrl: lpc-ctrl@80 {
+            compatible = "aspeed,ast2600-lpc-ctrl";
+            reg = <0x80 0x80>;
+            clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+            memory-region = <&flash_memory>;
+            flash = <&spi>;
+        };
+
+        lpc_reset: reset-controller@98 {
+            compatible = "aspeed,ast2600-lpc-reset";
+            reg = <0x98 0x4>;
+            #reset-cells = <1>;
+        };
+
+        lpc_snoop: lpc-snoop@90 {
+            compatible = "aspeed,ast2600-lpc-snoop";
+            reg = <0x90 0x8>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            snoop-ports = <0x80>;
+        };
+    };
-- 
2.17.1