Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 30 Sep 2021 17:10:23 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Alexandru Ardelean <aardelean@deviqon.com>
Cc:     linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
        Maxime Ripard <maxime@cerno.tech>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: Re: [PATCH] iio: adc: nau7802: convert probe to full device-managed
Message-ID: <20210930171023.2bf5a414@jic23-huawei>
In-Reply-To: <20210926154932.3287590-1-aardelean@deviqon.com>
References: <20210926154932.3287590-1-aardelean@deviqon.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Sun, 26 Sep 2021 18:49:32 +0300
Alexandru Ardelean <aardelean@deviqon.com> wrote:

> This is a trivial conversion to device-managed functions.
> The mutex_destroy() calls are redundant, as the data will be free'd anyway.
> 
> And the IRQ and IIO register functions both have device-managed
> equivalents.
> 
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>

+CC Maxime and Alexandre.

Looks simple enough to me that I won't wait on their replies to queue it up.
Obviously feedback welcome though!

Applied to the togreg branch of iio.git and pushed out as testing for 0-day
to see if it can find stuff we missed.

Thanks,

Jonathan


> ---
>  drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
>  1 file changed, 9 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
> index bb70b51d25b1..976c235f3079 100644
> --- a/drivers/iio/adc/nau7802.c
> +++ b/drivers/iio/adc/nau7802.c
> @@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
>  
>  	st = iio_priv(indio_dev);
>  
> -	i2c_set_clientdata(client, indio_dev);
> -
>  	indio_dev->name = dev_name(&client->dev);
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->info = &nau7802_info;
> @@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
>  	 * will enable them back when we will need them..
>  	 */
>  	if (client->irq) {
> -		ret = request_threaded_irq(client->irq,
> -				NULL,
> -				nau7802_eoc_trigger,
> -				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
> -				IRQF_NO_AUTOEN,
> -				client->dev.driver->name,
> -				indio_dev);
> +		ret = devm_request_threaded_irq(&client->dev, client->irq,
> +						NULL,
> +						nau7802_eoc_trigger,
> +						IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
> +						IRQF_NO_AUTOEN,
> +						client->dev.driver->name,
> +						indio_dev);
>  		if (ret) {
>  			/*
>  			 * What may happen here is that our IRQ controller is
> @@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
>  		ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
>  					  NAU7802_CTRL2_CRS(st->sample_rate));
>  		if (ret)
> -			goto error_free_irq;
> +			return ret;
>  	}
>  
>  	/* Setup the ADC channels available on the board */
> @@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
>  	mutex_init(&st->lock);
>  	mutex_init(&st->data_lock);
>  
> -	ret = iio_device_register(indio_dev);
> -	if (ret < 0) {
> -		dev_err(&client->dev, "Couldn't register the device.\n");
> -		goto error_device_register;
> -	}
> -
> -	return 0;
> -
> -error_device_register:
> -	mutex_destroy(&st->lock);
> -	mutex_destroy(&st->data_lock);
> -error_free_irq:
> -	if (client->irq)
> -		free_irq(client->irq, indio_dev);
> -
> -	return ret;
> -}
> -
> -static int nau7802_remove(struct i2c_client *client)
> -{
> -	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> -	struct nau7802_state *st = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -	mutex_destroy(&st->lock);
> -	mutex_destroy(&st->data_lock);
> -	if (client->irq)
> -		free_irq(client->irq, indio_dev);
> -
> -	return 0;
> +	return devm_iio_device_register(&client->dev, indio_dev);
>  }
>  
>  static const struct i2c_device_id nau7802_i2c_id[] = {
> @@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
>  
>  static struct i2c_driver nau7802_driver = {
>  	.probe = nau7802_probe,
> -	.remove = nau7802_remove,
>  	.id_table = nau7802_i2c_id,
>  	.driver = {
>  		   .name = "nau7802",