Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   James Morse <james.morse@arm.com>
To:     x86@kernel.org, linux-kernel@vger.kernel.org
Cc:     Fenghua Yu <fenghua.yu@intel.com>,
        Reinette Chatre <reinette.chatre@intel.com>,
        Thomas Gleixner <tglx@linutronix.de>,
        Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
        H Peter Anvin <hpa@zytor.com>,
        Babu Moger <Babu.Moger@amd.com>,
        James Morse <james.morse@arm.com>,
        shameerali.kolothum.thodi@huawei.com,
        Jamie Iles <jamie@nuviainc.com>,
        D Scott Phillips OS <scott@os.amperecomputing.com>,
        lcherian@marvell.com, bobo.shaobowang@huawei.com,
        tan.shaopeng@fujitsu.com
Subject: [PATCH v2 09/23] x86/resctrl: Switch over to the resctrl mbps_val list
Date:   Fri,  1 Oct 2021 16:02:48 +0000
Message-Id: <20211001160302.31189-10-james.morse@arm.com>
In-Reply-To: <20211001160302.31189-1-james.morse@arm.com>
References: <20211001160302.31189-1-james.morse@arm.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Updates to resctrl's software controller follow the same path as
other configuration updates, but they don't modify the hardware state.
rdtgroup_schemata_write() uses parse_line() and the resource's
ctrlval_parse function to stage the configuration.
resctrl_arch_update_domains() then updates the mbps_val[] array
instead, and resctrl_arch_update_domains() skips the rdt_ctrl_update()
call that would update hardware.

This complicates the interface between resctrl's filesystem parts
and architecture specific code. It should be possible for mba_sc
to be completely implemented by the filesystem parts of resctrl. This
would allow it to work on a second architecture with no additional code.

Change parse_bw() to write the configuration value directly to the
mba_sc[] array in the domain structure. Change rdtgroup_schemata_write()
to skip the call to resctrl_arch_update_domains(), meaning all the
mba_sc specific code in resctrl_arch_update_domains() can be removed.
On the read-side, show_doms() and update_mba_bw() are changed to read
the mba_sc[] array from the domain structure. With this,
resctrl_arch_get_config() no longer needs to consider mba_sc resources.

Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v1:
 * Squashed out struct resctrl_mba_sc
 * Removed stray paragraphs from commit message
---
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 44 ++++++++++++++---------
 arch/x86/kernel/cpu/resctrl/monitor.c     | 10 +++---
 2 files changed, 31 insertions(+), 23 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 87666275eed9..9f45207a6c74 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -61,6 +61,7 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
 	     struct rdt_domain *d)
 {
 	struct resctrl_staged_config *cfg;
+	u32 closid = data->rdtgrp->closid;
 	struct rdt_resource *r = s->res;
 	unsigned long bw_val;
 
@@ -72,6 +73,12 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
 
 	if (!bw_validate(data->buf, &bw_val, r))
 		return -EINVAL;
+
+	if (is_mba_sc(r)) {
+		d->mbps_val[closid] = bw_val;
+		return 0;
+	}
+
 	cfg->new_ctrl = bw_val;
 	cfg->have_new_ctrl = true;
 
@@ -261,14 +268,13 @@ static u32 get_config_index(u32 closid, enum resctrl_conf_type type)
 
 static bool apply_config(struct rdt_hw_domain *hw_dom,
 			 struct resctrl_staged_config *cfg, u32 idx,
-			 cpumask_var_t cpu_mask, bool mba_sc)
+			 cpumask_var_t cpu_mask)
 {
 	struct rdt_domain *dom = &hw_dom->d_resctrl;
-	u32 *dc = !mba_sc ? hw_dom->ctrl_val : hw_dom->mbps_val;
 
-	if (cfg->new_ctrl != dc[idx]) {
+	if (cfg->new_ctrl != hw_dom->ctrl_val[idx]) {
 		cpumask_set_cpu(cpumask_any(&dom->cpu_mask), cpu_mask);
-		dc[idx] = cfg->new_ctrl;
+		hw_dom->ctrl_val[idx] = cfg->new_ctrl;
 
 		return true;
 	}
@@ -284,14 +290,12 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 	enum resctrl_conf_type t;
 	cpumask_var_t cpu_mask;
 	struct rdt_domain *d;
-	bool mba_sc;
 	int cpu;
 	u32 idx;
 
 	if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL))
 		return -ENOMEM;
 
-	mba_sc = is_mba_sc(r);
 	msr_param.res = NULL;
 	list_for_each_entry(d, &r->domains, list) {
 		hw_dom = resctrl_to_arch_dom(d);
@@ -301,7 +305,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 				continue;
 
 			idx = get_config_index(closid, t);
-			if (!apply_config(hw_dom, cfg, idx, cpu_mask, mba_sc))
+			if (!apply_config(hw_dom, cfg, idx, cpu_mask))
 				continue;
 
 			if (!msr_param.res) {
@@ -315,11 +319,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 		}
 	}
 
-	/*
-	 * Avoid writing the control msr with control values when
-	 * MBA software controller is enabled
-	 */
-	if (cpumask_empty(cpu_mask) || mba_sc)
+	if (cpumask_empty(cpu_mask))
 		goto done;
 	cpu = get_cpu();
 	/* Update resource control msr on this CPU if it's in cpu_mask. */
@@ -406,6 +406,14 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of,
 
 	list_for_each_entry(s, &resctrl_schema_all, list) {
 		r = s->res;
+
+		/*
+		 * Writes to mba_sc resources update the software controller,
+		 * not the control msr.
+		 */
+		if (is_mba_sc(r))
+			continue;
+
 		ret = resctrl_arch_update_domains(r, rdtgrp->closid);
 		if (ret)
 			goto out;
@@ -433,9 +441,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
 	u32 idx = get_config_index(closid, type);
 
-	if (!is_mba_sc(r))
-		return hw_dom->ctrl_val[idx];
-	return hw_dom->mbps_val[idx];
+	return hw_dom->ctrl_val[idx];
 }
 
 static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int closid)
@@ -450,8 +456,12 @@ static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int clo
 		if (sep)
 			seq_puts(s, ";");
 
-		ctrl_val = resctrl_arch_get_config(r, dom, closid,
-						   schema->conf_type);
+		if (is_mba_sc(r))
+			ctrl_val = dom->mbps_val[closid];
+		else
+			ctrl_val = resctrl_arch_get_config(r, dom, closid,
+							   schema->conf_type);
+
 		seq_printf(s, r->format_str, dom->id, max_data_width,
 			   ctrl_val);
 		sep = true;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 37af1790337f..66c2667584dc 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -447,13 +447,11 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 	hw_dom_mba = resctrl_to_arch_dom(dom_mba);
 
 	cur_bw = pmbm_data->prev_bw;
-	user_bw = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
+	user_bw = dom_mba->mbps_val[closid];
 	delta_bw = pmbm_data->delta_bw;
-	/*
-	 * resctrl_arch_get_config() chooses the mbps/ctrl value to return
-	 * based on is_mba_sc(). For now, reach into the hw_dom.
-	 */
-	cur_msr_val = hw_dom_mba->ctrl_val[closid];
+
+	/* MBA monitor resource doesn't support CDP */
+	cur_msr_val = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
 
 	/*
 	 * For Ctrl groups read data from child monitor groups.
-- 
2.30.2