Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 7 Oct 2021 23:00:02 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     Marcel Ziswiler <marcel@ziswiler.com>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        Arnd Bergmann <arnd@arndb.de>,
        Frank Rowand <frowand.list@gmail.com>,
        Gregory Clement <gregory.clement@bootlin.com>,
        Olof Johansson <olof@lixom.net>,
        Rob Herring <robh+dt@kernel.org>,
        Russell King <linux@armlinux.org.uk>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        soc@kernel.org
Subject: Re: [PATCH v3 3/3] ARM: dts: mvebu: add device tree for netgear
 gs110emx switch
Message-ID: <YV9f0qhwn770Hf8+@lunn.ch>
References: <20211007205659.702842-1-marcel@ziswiler.com>
 <20211007205659.702842-4-marcel@ziswiler.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20211007205659.702842-4-marcel@ziswiler.com>
Precedence: bulk

On Thu, Oct 07, 2021 at 10:56:59PM +0200, Marcel Ziswiler wrote:
> Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit
> ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch
> sits at its core connecting to two 88X3310P 10G PHYs. The control plane
> is handled by an 88F6811 Armada 381 SoC.
> 
> The following functionality is tested:
> - 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811
> - serial console UART
> - 128 MB commercial grade DDR3L SDRAM
> - 16 MB serial SPI NOR flash
> 
> The two 88X3310P 10G PHYs while detected during boot seem neither to
> detect any link nor pass any traffic.
> 
> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew