Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc:     kernel@axis.com, linux-iio@vger.kernel.org, robh+dt@kernel.org,
        peda@axentia.se, lars@metafoo.de, jic23@kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
In-Reply-To: <20211007134641.13417-3-vincent.whitchurch@axis.com>
References: <20211007134641.13417-1-vincent.whitchurch@axis.com> <20211007134641.13417-3-vincent.whitchurch@axis.com>
Subject: Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
Date:   Thu, 07 Oct 2021 21:46:12 -0500
Message-Id: <1633661172.633248.1409599.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote:
> Hardware may require some time for the muxed analog signals to settle
> after the muxing is changed.  Allow this time to be specified in the
> devicetree.
> 
> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
> ---
>  .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml  | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1537724


adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc11mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc12mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc13mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc1mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc2mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc3mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc4mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc5mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc6mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc7mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc8mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

adc9mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml

envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements
	arch/arm/boot/dts/at91-tse850-3.dt.yaml