Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20211008114343.57920-1-robert.marko@sartura.hr>
 <20211008120855.46zbo2fl5edwf7ja@pali> <CA+HBbNGvFtws2GF7RLbznAbXfvjKx4rOJ=eMeuHOJ6s7iANtzw@mail.gmail.com>
 <20211008134347.lskm5pzt73pkf7oc@pali> <CA+HBbNEDxBDvNZPSWnBYJOUhqdwonBhFwD9P0xhSGccdvQJx3Q@mail.gmail.com>
 <20211008172948.rpev5iptnczdofwi@pali>
In-Reply-To: <20211008172948.rpev5iptnczdofwi@pali>
From:   Robert Marko <robert.marko@sartura.hr>
Date:   Fri, 8 Oct 2021 22:51:04 +0200
Message-ID: <CA+HBbNExegyMENPrWBWrhNVJPMOfcE7L=5psUvBEi3o5quP=Fg@mail.gmail.com>
Subject: Re: [PATCH v5] arm64: dts: marvell: add Globalscale MOCHAbin
To:     =?UTF-8?Q?Pali_Roh=C3=A1r?= <pali@kernel.org>
Cc:     =?UTF-8?B?TWFyZWsgQmVow7pu?= <kabel@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
        gregory.clement@bootlin.com, sebastian.hesselbarth@gmail.com,
        devicetree <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Fri, Oct 8, 2021 at 7:29 PM Pali Roh=C3=A1r <pali@kernel.org> wrote:
>
> On Friday 08 October 2021 17:52:40 Robert Marko wrote:
> > On Fri, Oct 8, 2021 at 3:43 PM Pali Roh=C3=A1r <pali@kernel.org> wrote:
> > >
> > > On Friday 08 October 2021 15:28:38 Robert Marko wrote:
> > > > > > +     cp0_pcie_reset_pins: cp0-pcie-reset-pins {
> > > > > > +             marvell,pins =3D "mpp9";
> > > > > > +             marvell,function =3D "gpio";
> > > > >
> > > > > Now I spotted this. Why is PERST# pin configured into gpio mode? =
Is
> > > > > there some issue that this pin in pcie mode is not working proper=
ly,
> > > > > that PCIe controller cannot handle it correctly? Or something els=
e?
> > > >
> > > > Its because I have seen way too many broken controllers when it com=
es
> > > > to PERST and
> > > > other Armada 7k/8k devices are using it in GPIO mode as well.
> > > > Just look at the number of conversions back to GPIO for other
> > > > platforms as there is always some bug.
> > >
> > > I know that A3720 has broken PERST# control in PCIe block... or at le=
ast
> > > I was not able to figure out how A3720 PCIe block can control PERST#.=
 So
> > > configuring it in gpio mode and let PERST# to be controlled manually =
via
> > > gpio by the software is the workaround.
> > >
> > > I just wanted to know if A7k/A8k/CN913x is also broken in the same wa=
y
> > > as A3720.
> > >
> > > Or it it just a configuration workaround for missing driver or missin=
g
> > > proper software setup.
> > >
> > > HW bugs like this should be properly documented and not hidden behind
> > > some configuration in DTS file. And reported to HW vendors.
> >
> > I have to agree, so I did some digging.
> > I don't think that the Armada 8k PCI driver actually supports HW level =
PERST#.
> > I then looked at the functional specs and the only thing that looks
> > related to PERST#
> > is PCIe Software Reset Register which has a SoftWarePERst bit.
> >
> > Can you maybe look at it?
>
> Some details are in "PCIe Reset" section in Hardware Specification. In
> Software Functional Specification seems to be nothing useful. Just those
> registers without description.

It seems there are 4 bits that somehow set PCIe_Reset_out signal as
they call it.
No idea how to properly use it anyway, I will use it as a GPIO for now.

Regards,
Robert
>
> > Removed the reset-gpios and set the PERST pinmux to PCIe, and the
> > QCA9377 card will
> > show up, but I have no idea whether PERST# actually ever gets toggled.
> >
> > Regards,
> > Robert
> > --
> > Robert Marko
> > Staff Embedded Linux Engineer
> > Sartura Ltd.
> > Lendavska ulica 16a
> > 10000 Zagreb, Croatia
> > Email: robert.marko@sartura.hr
> > Web: www.sartura.hr


--=20
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr