Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Naveen Naidu <naveennaidu479@gmail.com>
To:     bhelgaas@google.com
Cc:     Naveen Naidu <naveennaidu479@gmail.com>,
        linux-kernel-mentees@lists.linuxfoundation.org,
        linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
        thomas.petazzoni@bootlin.com, lorenzo.pieralisi@arm.com,
        robh@kernel.org, kw@linux.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/22] PCI: mvebu: Use SET_PCI_ERROR_RESPONSE() when device not found
Date:   Mon, 11 Oct 2021 23:30:00 +0530
Message-Id: <147d72149c4863be53b6044e8db6772c1b450bc0.1633972263.git.naveennaidu479@gmail.com>
In-Reply-To: <cover.1633972263.git.naveennaidu479@gmail.com>
References: <cover.1633972263.git.naveennaidu479@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty
read occurs.

This helps unify PCI error response checking and make error check
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/controller/pci-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index ed13e81cd691..51d61194a31a 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -654,7 +654,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 
 	port = mvebu_pcie_find_port(pcie, bus, devfn);
 	if (!port) {
-		*val = 0xffffffff;
+		SET_PCI_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
@@ -664,7 +664,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 						 size, val);
 
 	if (!mvebu_pcie_link_up(port)) {
-		*val = 0xffffffff;
+		SET_PCI_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-- 
2.25.1