Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   =?UTF-8?q?Alvin=20=C5=A0ipraga?= <alvin@pqrs.dk>
To:     Linus Walleij <linus.walleij@linaro.org>,
        Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>
Cc:     =?UTF-8?q?Alvin=20=C5=A0ipraga?= <alsi@bang-olufsen.dk>,
        netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 net-next 0/6] net: dsa: add support for RTL8365MB-VC
Date:   Wed, 13 Oct 2021 16:50:32 +0200
Message-Id: <20211013145040.886956-1-alvin@pqrs.dk>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Alvin Šipraga <alsi@bang-olufsen.dk>

This series adds support for Realtek's RTL8365MB-VC, a 4+1 port
10/100/1000M Ethernet switch. The driver - rtl8365mb - was developed by
Michael Ramussen and myself.

This version of the driver is relatively slim, implementing only the
standalone port functionality and no offload capabilities. It is based
on a previous RFC series [1] from August, and the main difference is the
removal of some spurious VLAN operations. Otherwise I have simply
addressed most of the feedback. Please see the respective patches for
more detail.

In parallel I am working on offloading the bridge layer capabilities,
but I would like to get the basic stuff upstreamed as soon as possible.

v1 -> v2:
  - drop DSA port type checks during MAC configuration
  - use OF properties to configure RGMII TX/RX delay
  - don't set default fwd_offload_mark if packet is trapped to CPU
  - remove port mapping macros
  - update device tree bindings documentation with an example
  - cosmetic changes to the tagging driver using FIELD_* macros

[1] https://lore.kernel.org/netdev/20210822193145.1312668-1-alvin@pqrs.dk/

Alvin Šipraga (6):
  ether: add EtherType for proprietary Realtek protocols
  net: dsa: move NET_DSA_TAG_RTL4_A to right place in Kconfig/Makefile
  dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb
  net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag
  net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC
  net: phy: realtek: add support for RTL8365MB-VC internal PHYs

 .../bindings/net/dsa/realtek-smi.txt          |   87 +
 drivers/net/dsa/Kconfig                       |    1 +
 drivers/net/dsa/Makefile                      |    2 +-
 drivers/net/dsa/realtek-smi-core.c            |    4 +
 drivers/net/dsa/realtek-smi-core.h            |    1 +
 drivers/net/dsa/rtl8365mb.c                   | 1533 +++++++++++++++++
 drivers/net/phy/realtek.c                     |    8 +
 include/net/dsa.h                             |    2 +
 include/uapi/linux/if_ether.h                 |    1 +
 net/dsa/Kconfig                               |   20 +-
 net/dsa/Makefile                              |    3 +-
 net/dsa/tag_rtl8_4.c                          |  184 ++
 12 files changed, 1837 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/dsa/rtl8365mb.c
 create mode 100644 net/dsa/tag_rtl8_4.c

-- 
2.32.0