Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Zheyu Ma <zheyuma97@gmail.com>
To:     wg@grandegger.com, mkl@pengutronix.de, davem@davemloft.net,
        kuba@kernel.org
Cc:     linux-can@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org, Zheyu Ma <zheyuma97@gmail.com>
Subject: [PATCH] can: peak_pci: Fix UAF in peak_pci_remove
Date:   Thu, 14 Oct 2021 06:28:33 +0000
Message-Id: <1634192913-15639-1-git-send-email-zheyuma97@gmail.com>
Precedence: bulk

When remove the module peek_pci, referencing 'chan' again after
releasing 'dev' will cause UAF.

Fix this by releasing 'dev' later.

The following log reveals it:

[   35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537
[   35.965513 ] Call Trace:
[   35.965718 ]  dump_stack_lvl+0xa8/0xd1
[   35.966028 ]  print_address_description+0x87/0x3b0
[   35.966420 ]  kasan_report+0x172/0x1c0
[   35.966725 ]  ? peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.967137 ]  ? trace_irq_enable_rcuidle+0x10/0x170
[   35.967529 ]  ? peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.967945 ]  __asan_report_load8_noabort+0x14/0x20
[   35.968346 ]  peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.968752 ]  pci_device_remove+0xa9/0x250

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
 drivers/net/can/sja1000/peak_pci.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 6db90dc4bc9d..84f34020aafb 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -752,16 +752,15 @@ static void peak_pci_remove(struct pci_dev *pdev)
 		struct net_device *prev_dev = chan->prev_dev;
 
 		dev_info(&pdev->dev, "removing device %s\n", dev->name);
+		/* do that only for first channel */
+		if (!prev_dev && chan->pciec_card)
+			peak_pciec_remove(chan->pciec_card);
 		unregister_sja1000dev(dev);
 		free_sja1000dev(dev);
 		dev = prev_dev;
 
-		if (!dev) {
-			/* do that only for first channel */
-			if (chan->pciec_card)
-				peak_pciec_remove(chan->pciec_card);
+		if (!dev)
 			break;
-		}
 		priv = netdev_priv(dev);
 		chan = priv->priv;
 	}
-- 
2.17.6