Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932996AbWL0RSq (ORCPT ); Wed, 27 Dec 2006 12:18:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933017AbWL0RSZ (ORCPT ); Wed, 27 Dec 2006 12:18:25 -0500 Received: from guri.is.scarlet.be ([193.74.71.22]:41804 "EHLO guri.is.scarlet.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932996AbWL0RSA (ORCPT ); Wed, 27 Dec 2006 12:18:00 -0500 X-Greylist: delayed 9211 seconds by postgrey-1.27 at vger.kernel.org; Wed, 27 Dec 2006 12:17:57 EST Message-ID: <459286C2.7080705@scarlet.be> Date: Wed, 27 Dec 2006 14:44:18 +0000 From: Joel Soete User-Agent: Icedove 1.5.0.9 (X11/20061220) MIME-Version: 1.0 To: Alan Cox CC: Ioan Ionita , Alan , linux-kernel@vger.kernel.org, jgarzik@pobox.com, htejun@gmail.com Subject: Re: 2.6.19-rc5 libata PATA ATAPI CDROM SiS 5513 NOT WORKING References: <20061116235048.3cd91beb@localhost.localdomain> <20061117100559.GA10275@devserv.devel.redhat.com> In-Reply-To: <20061117100559.GA10275@devserv.devel.redhat.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-DCC-scarlet.be-Metrics: guri 2020; Body=7 Fuz1=7 Fuz2=7 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6659 Lines: 162 Hello Alan, Jeff, Reading a paper on this new libata, I just want to try but failled yet for what said this thread "ATAPI CDROM" ;_(. I first test the latest stable 2.6.19.1 without luck, so I also want to try latest 2.6.20-rc2 unfortunately without more success. Here it was the test of new libata with 2.6.19.1: [snip] ata_piix 0000:00:07.1: version 2.00ac6 ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 scsi3 : ata_piix ata1.00: ATA-4, max UDMA/66, 29336832 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max MWDMA1 ata1.00: configured for UDMA/33 ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1.01: limiting speed to PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1.01: disabled ata1: failed to recover some devices, retrying in 5 secs ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/25 ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.00: configured for UDMA/25 scsi4 : ata_piix scsi 3:0:0:0: Direct-Access ATA QUANTUM FIREBALL A03. PQ: 0 ANSI: 5 SCSI device sdc: 29336832 512-byte hdwr sectors (15020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 29336832 512-byte hdwr sectors (15020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > sd 3:0:0:0: Attached scsi disk sdc sd 3:0:0:0: Attached scsi generic sg2 type 0 [snip] And today with 2.6.20-rc2: ata_piix 0000:00:07.1: version 2.00ac7 ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 scsi3 : ata_piix ata1.00: ATA-4, max UDMA/66, 29336832 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max MWDMA1 ata1.00: configured for UDMA/33 ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1.01: limiting speed to PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.01: qc timeout (cmd 0xa1) ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.01: revalidation failed (errno=-5) ata1.01: disabled ata1: failed to recover some devices, retrying in 5 secs ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/25 ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1.00: configured for UDMA/25 scsi4 : ata_piix scsi 3:0:0:0: Direct-Access ATA QUANTUM FIREBALL A03. PQ: 0 ANSI: 5 SCSI device sdc: 29336832 512-byte hdwr sectors (15020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 29336832 512-byte hdwr sectors (15020 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > sd 3:0:0:0: Attached scsi disk sdc sd 3:0:0:0: Attached scsi generic sg2 type 0 [snip] seems to look like same kind of pb this thread speak about (i.e. hd seems to works fine but not atapi cdrom (r/w)) but not sure? Any idea/advise? Tia, Joel PS0: I check that scsi cdrom was well selected PS1: with traditional ide support I get (with same 2.6.19.1 kernel): [snip] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: QUANTUM FIREBALLlct10 15, ATA DISK drive hdb: PHILIPS CDD3610 CD-R/RW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 128KiB hda: 29336832 sectors (15020 MB) w/418KiB Cache, CHS=29104/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 hda18 hda19 hda20 hda21 hda22 hda23 hda24 > hdb: ATAPI 6X CD-ROM CD-R/RW drive, 768kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 [snip] Alan Cox wrote: > On Thu, Nov 16, 2006 at 08:34:03PM -0500, Ioan Ionita wrote: >>> ata2.00: limiting speed to UDMA/25 >>> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata2.00: (BMDMA stat 0x20) >>> ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51 err 0x51 (timeout) > > etc.. - yes known. Something in the core code but not yet fixed (and I've > not had time to look at this). > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/