Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 18 Oct 2021 23:37:52 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     Luo Jie <luoj@codeaurora.org>
Cc:     hkallweit1@gmail.com, linux@armlinux.org.uk, davem@davemloft.net,
        kuba@kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org, sricharan@codeaurora.org
Subject: Re: [PATCH v3 08/13] net: phy: add qca8081 config_aneg
Message-ID: <YW3pMD7PD2M3lD3o@lunn.ch>
References: <20211018033333.17677-1-luoj@codeaurora.org>
 <20211018033333.17677-9-luoj@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20211018033333.17677-9-luoj@codeaurora.org>
Precedence: bulk

On Mon, Oct 18, 2021 at 11:33:28AM +0800, Luo Jie wrote:
> Reuse at803x phy driver config_aneg excepting
> adding 2500M auto-negotiation.
> 
> Signed-off-by: Luo Jie <luoj@codeaurora.org>
> ---
>  drivers/net/phy/at803x.c | 26 +++++++++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 0c22ef735230..c124d3fe40fb 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -1084,7 +1084,30 @@ static int at803x_config_aneg(struct phy_device *phydev)
>  			return ret;
>  	}
>  
> -	return genphy_config_aneg(phydev);
> +	/* Do not restart auto-negotiation by setting ret to 0 defautly,
> +	 * when calling __genphy_config_aneg later.
> +	 */
> +	ret = 0;
> +
> +	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
> +		int phy_ctrl = 0;
> +
> +		/* The reg MII_BMCR also needs to be configured for force mode, the
> +		 * genphy_config_aneg is also needed.
> +		 */
> +		if (phydev->autoneg == AUTONEG_DISABLE)
> +			genphy_c45_pma_setup_forced(phydev);
> +
> +		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
> +			phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
> +
> +		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
> +				MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);

Does the PHY also have MDIO_MMD_AN, MDIO_AN_ADVERTISE ? I'm wondering
if you can use genphy_c45_an_config_aneg()

   Andrew