Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Naveen Naidu <naveennaidu479@gmail.com>
To:     bhelgaas@google.com
Cc:     Naveen Naidu <naveennaidu479@gmail.com>,
        linux-kernel-mentees@lists.linuxfoundation.org,
        linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
        skhan@linuxfoundation.org
Subject: [PATCH v3 16/25] PCI/ERR: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
Date:   Thu, 21 Oct 2021 20:37:41 +0530
Message-Id: <50db352f97df56d37f3af99c8999d6136436aaba.1634825082.git.naveennaidu479@gmail.com>
In-Reply-To: <cover.1634825082.git.naveennaidu479@gmail.com>
References: <cover.1634825082.git.naveennaidu479@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read
data from hardware.

This unifies PCI error response checking and make error checks
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/pci.c   | 10 +++++-----
 drivers/pci/probe.c | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index ce2ab62b64cf..4eaf29f004bd 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1077,7 +1077,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return -EIO;
 
 	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-	if (pmcsr == (u16) ~0) {
+	if (RESPONSE_IS_PCI_ERROR(pmcsr)) {
 		pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n",
 			pci_power_name(dev->current_state),
 			pci_power_name(state));
@@ -1239,16 +1239,16 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	 * After reset, the device should not silently discard config
 	 * requests, but it may still indicate that it needs more time by
 	 * responding to them with CRS completions.  The Root Port will
-	 * generally synthesize ~0 data to complete the read (except when
-	 * CRS SV is enabled and the read was for the Vendor ID; in that
-	 * case it synthesizes 0x0001 data).
+	 * generally synthesize ~0 (PCI_ERROR_RESPONSE) data to complete
+	 * the read (except when CRS SV is enabled and the read was for the
+	 * Vendor ID; in that case it synthesizes 0x0001 data).
 	 *
 	 * Wait for the device to return a non-CRS completion.  Read the
 	 * Command register instead of Vendor ID so we don't have to
 	 * contend with the CRS SV value.
 	 */
 	pci_read_config_dword(dev, PCI_COMMAND, &id);
-	while (id == ~0) {
+	while (RESPONSE_IS_PCI_ERROR(id)) {
 		if (delay > timeout) {
 			pci_warn(dev, "not ready %dms after %s; giving up\n",
 				 delay - 1, reset_type);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d9fc02a71baa..8bf4034ddbd4 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -206,14 +206,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
 	 * 1 must be clear.
 	 */
-	if (sz == 0xffffffff)
+	if (RESPONSE_IS_PCI_ERROR(sz))
 		sz = 0;
 
 	/*
 	 * I don't know how l can have all bits set.  Copied from old code.
 	 * Maybe it fixes a bug on some ancient platform.
 	 */
-	if (l == 0xffffffff)
+	if (RESPONSE_IS_PCI_ERROR(l))
 		l = 0;
 
 	if (type == pci_bar_unknown) {
@@ -1660,7 +1660,7 @@ static int pci_cfg_space_size_ext(struct pci_dev *dev)
 
 	if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
 		return PCI_CFG_SPACE_SIZE;
-	if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
+	if (RESPONSE_IS_PCI_ERROR(status) || pci_ext_cfg_is_aliased(dev))
 		return PCI_CFG_SPACE_SIZE;
 
 	return PCI_CFG_SPACE_EXP_SIZE;
@@ -2336,8 +2336,8 @@ bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
 	if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
 		return false;
 
-	/* Some broken boards return 0 or ~0 if a slot is empty: */
-	if (*l == 0xffffffff || *l == 0x00000000 ||
+	/* Some broken boards return 0 or ~0 (PCI_ERROR_RESPONSE) if a slot is empty: */
+	if (RESPONSE_IS_PCI_ERROR(*l) || *l == 0x00000000 ||
 	    *l == 0x0000ffff || *l == 0xffff0000)
 		return false;
 
-- 
2.25.1