Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 21 Oct 2021 20:39:26 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     Lars-Peter Clausen <lars@metafoo.de>
Cc:     Vincent Whitchurch <vincent.whitchurch@axis.com>, peda@axentia.se,
        devicetree@vger.kernel.org, kernel@axis.com,
        linux-iio@vger.kernel.org, robh+dt@kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/3] Add settle time support to iio-mux
Message-ID: <20211021203918.17cb8d68@jic23-huawei>
In-Reply-To: <c944fba5-9f69-e043-d4f6-3d30f1393190@metafoo.de>
References: <20211007134641.13417-1-vincent.whitchurch@axis.com>
        <16fab3ba-5dd9-50b3-aeae-acd68b22dfae@metafoo.de>
        <c944fba5-9f69-e043-d4f6-3d30f1393190@metafoo.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Tue, 19 Oct 2021 09:03:00 +0200
Lars-Peter Clausen <lars@metafoo.de> wrote:

> On 10/8/21 9:19 PM, Lars-Peter Clausen wrote:
> > On 10/7/21 3:46 PM, Vincent Whitchurch wrote:  
> >> On one of our boards we use gpio-mux with iio-mux to read voltages 
> >> using an ADC
> >> from a few different channels, and on this board the input voltage 
> >> needs some
> >> time to stabilize after a switch of the mux.
> >>
> >> This series add devicetree and driver support for this kind of 
> >> hardware which
> >> requries a settle time after muxing.  
> >
> > I have a board with the very same problem. And a similar solution, but 
> > you beat me with upstreaming. I've switched to your patchset.
> >
> > Whole series
> >
> > Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
> >
> > Acked-by: Lars-Peter Clausen <lars@metafoo.de>  
> Oh, I just realized I messed up. I meant to write
> 
> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
> Tested-by: Lars-Peter Clausen <lars@metafoo.de>
> 
Fixed up.

Thanks,

Jonathan