Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jesse Taube <mr.bossman075@gmail.com>
To:     linux-imx@nxp.com
Cc:     mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
        shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de,
        festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com,
        stefan@agner.ch, linus.walleij@linaro.org,
        gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net,
        soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com,
        adrian.hunter@intel.com, jirislaby@kernel.org,
        giulio.benetti@benettiengineering.com,
        nobuhiro1.iwamatsu@toshiba.co.jp, leonard.crestez@nxp.com,
        b20788@freescale.com, Mr.Bossman075@gmail.com, fugang.duan@nxp.com,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org,
        linux-serial@vger.kernel.org
Subject: [PATCH 09/13] tty: serial: fsl_lpuart: add i.MXRT support
Date:   Sun, 24 Oct 2021 11:40:23 -0400
Message-Id: <20211024154027.1479261-10-Mr.Bossman075@gmail.com>
In-Reply-To: <20211024154027.1479261-1-Mr.Bossman075@gmail.com>
References: <20211024154027.1479261-1-Mr.Bossman075@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add support for i.MXRT1050's uart.

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
 drivers/tty/serial/fsl_lpuart.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b1e7190ae483..1db083905d75 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -247,6 +247,7 @@ enum lpuart_type {
 	LS1028A_LPUART,
 	IMX7ULP_LPUART,
 	IMX8QXP_LPUART,
+	IMXRT_LPUART,
 };
 
 struct lpuart_port {
@@ -310,6 +311,11 @@ static struct lpuart_soc_data imx8qxp_data = {
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
 };
+static struct lpuart_soc_data imxrt_data = {
+	.devtype = IMXRT_LPUART,
+	.iotype = UPIO_MEM32,
+	.reg_off = IMX_REG_OFF,
+};
 
 static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,vf610-lpuart",	.data = &vf_data, },
@@ -317,6 +323,7 @@ static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,ls1028a-lpuart",	.data = &ls1028a_data, },
 	{ .compatible = "fsl,imx7ulp-lpuart",	.data = &imx7ulp_data, },
 	{ .compatible = "fsl,imx8qxp-lpuart",	.data = &imx8qxp_data, },
+	{ .compatible = "fsl,imxrt-lpuart",	.data = &imxrt_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -2625,6 +2632,7 @@ OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imxrt-lpuart", lpuart32_imx_early_console_setup);
 EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
 EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
 
-- 
2.33.0