Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210930121630.17449-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <20210930121630.17449-2-prabhakar.mahadev-lad.rj@bp.renesas.com> <CAMuHMdVm5gYFKZa=4jSm+GAsMYRUFwXjjXNhr16Z-ROVzpsZbA@mail.gmail.com>
In-Reply-To: <CAMuHMdVm5gYFKZa=4jSm+GAsMYRUFwXjjXNhr16Z-ROVzpsZbA@mail.gmail.com>
From:   "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date:   Tue, 26 Oct 2021 20:27:19 +0100
Message-ID: <CA+V-a8sgmocz+EPALfSytcmQYHbUeMWcz4ac6g5gzUARWDUaPA@mail.gmail.com>
Subject: Re: [RFC PATCH 1/4] dt-bindings: pincfg-node: Add "output-impedance" property
To:     Geert Uytterhoeven <geert@linux-m68k.org>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
        Biju Das <biju.das.jz@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Geert,

Thank you for the review.

On Thu, Oct 7, 2021 at 5:57 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Thu, Sep 30, 2021 at 2:17 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > On RZ/G2L SoC for Group-B pins, output impedance can be configured.
> > This patch documents "output-impedance" property in pincfg-node.yaml so
> > that other platforms requiring such feature can make use of this property.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> > +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> > @@ -114,6 +114,10 @@ properties:
> >      description: enable output on a pin without actively driving it
> >        (such as enabling an output buffer)
> >
> > +  output-impedance:
>
> output-impedance-ohms (ugh, the standard suffix is plural)
>
> Yes, I know only one other property has a standard unit suffix from
> dt-schema/schemas/property-units.yaml. Should we add properties
> including standard unit suffixes, and deprecate the old ones?
>
Yes, that should be the way to go forward.

Cheers,
Prabhakar

> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: set the pins output impedance at most X ohm
> > +
> >    output-low:
> >      type: boolean
> >      description: set the pin to output mode with low level
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds