Received: by 2002:a05:6a10:5bc5:0:0:0:0 with SMTP id os5csp851930pxb; Wed, 27 Oct 2021 13:44:51 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxPTpohAVHoS15xet1M0tzB/3VILD1OD4yQNp+SFE35F6nNUOkX25SyKnndRAUn0yjXjSsS X-Received: by 2002:a17:907:3fa1:: with SMTP id hr33mr43330744ejc.229.1635367491111; Wed, 27 Oct 2021 13:44:51 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1635367491; cv=none; d=google.com; s=arc-20160816; b=MJjREda4lAlIQQsrxjUj/XZGvzQuxgNw2deawWZpR25TkiFGeGTKCHLPIiFjI/1ivL aQuSKr5Hw+DEDDdc9Zhmh5Z/Qz88wvXoJsMsY2ppUxcCxJ7TLNgg0y4ZBZSyTU5CGlXe /jbnQOyD/U/IzWeJdyufQKMECQtZN/lZy8I0k4kOTEI34lu5dWk/ZxtrH5Fhp2qxkIgq 9UNiefvYPomO1QppKizWDjfhw6SctFgqWu/cG5qEA1f2umVAC6xJE7yUA7om+WCU5A/x c29Y/os9Mw/1kO8uIh0xH2yfz0UxZVATejl/b2XPKHABWkR9CaI1v+8iWLD2Zk2oV3Aj UbKA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:content-transfer-encoding:subject :cc:to:from:references:in-reply-to:message-id:date:dkim-signature; bh=5TceGaG4iYmoKhCFKupTQ02qL3V1EC4Vn4TYCTq6NnM=; b=TdQno6DJgG99Bnf24MvxkyYzmNOg1hFdPSS4Tv4oG1cwm1cLnlPjd28SpgOrTduCzu GDyg5Kl84uuQ09T8KK2xqSfhoQFE7RNguKJbQd37lS13CEnP/pv1YHGfFGaXlURsDTjy THXETDJrgHCczx1WHIWS1OQ4z89t8w2yhtSrNLqvnfGiz+j/BooWq0OXXZ/4NobV1FmO ugf4LaHN2W7UnPDZbL1tuIVBKdjEKUVxzNO/Sn2XudruVxidMalrw9ULjdrjpBF7U38i OiObW4t8vUAwz+1S/ybnaFIqyJlVhzBifR2iJRsxDFDllp3fNYtAOPgRGhJhsQzJ6YUr HBIA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@nathanrossi.com header.s=google header.b=OYBzVPpk; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=nathanrossi.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id q19si1268423edd.187.2021.10.27.13.44.27; Wed, 27 Oct 2021 13:44:51 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@nathanrossi.com header.s=google header.b=OYBzVPpk; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=nathanrossi.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240596AbhJ0HpM (ORCPT + 99 others); Wed, 27 Oct 2021 03:45:12 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34840 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240629AbhJ0HpI (ORCPT ); Wed, 27 Oct 2021 03:45:08 -0400 Received: from mail-pg1-x535.google.com (mail-pg1-x535.google.com [IPv6:2607:f8b0:4864:20::535]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BA275C061767 for ; Wed, 27 Oct 2021 00:42:43 -0700 (PDT) Received: by mail-pg1-x535.google.com with SMTP id t7so2086762pgl.9 for ; Wed, 27 Oct 2021 00:42:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nathanrossi.com; s=google; h=date:message-id:in-reply-to:references:from:to:cc:subject :content-transfer-encoding:mime-version; bh=5TceGaG4iYmoKhCFKupTQ02qL3V1EC4Vn4TYCTq6NnM=; b=OYBzVPpkFYU2VaFrQ7LF4gZA3cV3227R3GdwTVa9xYI6utlyXaJrkjb3kCgcinS9WT M6btCBWRpifYuRv/pvqeQPO6XFx4CUdu+u4PmzQeo4eZ8T9Q8AycxKrulFuKq3gnd0KZ MTTCzMcCO01rMmu6n6JfleuvpwHlnpWtbT92+iu+i3o+fjimQ8eDBjsBURxF1vvY3zDh XPrT3jmbfbO2xb5rhytXJgZ1jvfvj29K2aZI5s/JtsWA75R0QoxUsWs5ifQ9JPssqJXe zVf4HD4KVDVFIs7yppvNDVAmm14AzPQHkt9AvHJFaabZc09mNKOXl5eakr0ZSo4bDJZS r+Jg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:message-id:in-reply-to:references:from:to :cc:subject:content-transfer-encoding:mime-version; bh=5TceGaG4iYmoKhCFKupTQ02qL3V1EC4Vn4TYCTq6NnM=; b=USxodixsGvAPgNTuQe7HtCYUo/pyeScydbdwD15RGVXH5JYJSnX+kGM+MoRgmWLXDW IZ3tbZNIKTzEjxSGXmZ5vwz2KKksPjdIv37YWocxJ/OiDn88Sr+wlzlbOpKe52vzNH7q TS6lh+696MZ1SwrribrBGbeqe9QUSG3XMtWrzNBI65jGUdOzfzl/XbVUVp6l50tWi7Fl 5WKQxyAAmHWwhjEAJxbu8ShbjvoJ+pYULkQk6cIvVu1I3HWsacOlQzo/CoIv96qjAUyj mjbNRtDhzjPv4bupoTElSET/vXXMOfMLOYbDuM/+qaaiH9RzuFhIg0VlCzqpkwNXSEGj QeCg== X-Gm-Message-State: AOAM533YclGYe7Pmexulj6q4G1tO1vaXS9Za0Tz/6vdQDQMRgtiy1sXx oqky5WwxTXcomvBvoDXzgoR1wYL2oDVOhSKj X-Received: by 2002:a63:6b42:: with SMTP id g63mr22915263pgc.461.1635320563103; Wed, 27 Oct 2021 00:42:43 -0700 (PDT) Received: from [127.0.1.1] (117-20-69-24.751445.bne.nbn.aussiebb.net. [117.20.69.24]) by smtp.gmail.com with UTF8SMTPSA id z3sm5900349pfj.116.2021.10.27.00.42.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Oct 2021 00:42:42 -0700 (PDT) Date: Wed, 27 Oct 2021 07:42:12 +0000 Message-Id: <20211027074212.690611-3-nathan@nathanrossi.com> In-Reply-To: <20211027074212.690611-0-nathan@nathanrossi.com> References: <20211027074212.690611-0-nathan@nathanrossi.com> From: Nathan Rossi To: linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Nathan Rossi , Nathan Rossi , Jean Delvare , Guenter Roeck , Jonathan Corbet Subject: [PATCH v2 3/3] hwmon: Driver for Texas Instruments INA238 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Nathan Rossi The INA238 is a I2C power monitor similar to other INA2xx devices, providing shunt voltage, bus voltage, current, power and temperature measurements. Signed-off-by: Nathan Rossi --- Changes in v2: - Add ina238 documentation to hwmon/index - Remove unused header includes and sort - Set regmap_config max_register in struct initialization - Remove shunt-resistor attribute and associated functions - Rename crit/lcrit attributes to max/min - Rework to use the hwmon_chip_info API - Add max_alarm and min_alarm channels and associated alert/alarm config - Add device tree ti,shunt-gain property use and ADCRANGE setup --- Documentation/hwmon/ina238.rst | 56 ++++ Documentation/hwmon/index.rst | 1 + drivers/hwmon/Kconfig | 12 + drivers/hwmon/Makefile | 1 + drivers/hwmon/ina238.c | 672 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 742 insertions(+) create mode 100644 Documentation/hwmon/ina238.rst create mode 100644 drivers/hwmon/ina238.c diff --git a/Documentation/hwmon/ina238.rst b/Documentation/hwmon/ina238.rst new file mode 100644 index 0000000000..d9f4799844 --- /dev/null +++ b/Documentation/hwmon/ina238.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver ina238 +==================== + +Supported chips: + + * Texas Instruments INA238 + + Prefix: 'ina238' + + Addresses: I2C 0x40 - 0x4f + + Datasheet: + https://www.ti.com/lit/gpn/ina238 + +Author: Nathan Rossi + +Description +----------- + +The INA238 is a current shunt, power and temperature monitor with an I2C +interface. It includes a number of programmable functions including alerts, +conversion rate, sample averaging and selectable shunt voltage accuracy. + +The shunt value in micro-ohms can be set via platform data or device tree at +compile-time or via the shunt_resistor attribute in sysfs at run-time. Please +refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings +if the device tree is used. + +Sysfs entries +------------- + +======================= ======================================================= +in0_input Shunt voltage (mV) +in0_min Minimum shunt voltage threshold (mV) +in0_min_alarm Minimum shunt voltage alarm +in0_max Maximum shunt voltage threshold (mV) +in0_max_alarm Maximum shunt voltage alarm + +in1_input Bus voltage (mV) +in1_min Minimum bus voltage threshold (mV) +in1_min_alarm Minimum shunt voltage alarm +in1_max Maximum bus voltage threshold (mV) +in1_max_alarm Maximum shunt voltage alarm + +power1_input Power measurement (uW) +power1_max Maximum power threshold (uW) +power1_max_alarm Maximum power alarm + +curr1_input Current measurement (mA) + +temp1_input Die temperature measurement (mC) +temp1_max Maximum die temperature threshold (mC) +temp1_max_alarm Maximum die temperature alarm +======================= ======================================================= diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 7046bf1870..6f30c8c9c7 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -76,6 +76,7 @@ Hardware Monitoring Kernel Drivers ibmpowernv ina209 ina2xx + ina238 ina3221 intel-m10-bmc-hwmon ir35221 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7fde4c6e1e..21aff4cef7 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1872,6 +1872,18 @@ config SENSORS_INA2XX This driver can also be built as a module. If so, the module will be called ina2xx. +config SENSORS_INA238 + tristate "Texas Instruments INA238" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the INA238 power monitor + chip. This driver supports voltage, current, power and temperature + measurements as well as alarm configuration. + + This driver can also be built as a module. If so, the module + will be called ina238. + config SENSORS_INA3221 tristate "Texas Instruments INA3221 Triple Power Monitor" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index baee6a8d4d..1ddb26f57a 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o obj-$(CONFIG_SENSORS_INA209) += ina209.o obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o +obj-$(CONFIG_SENSORS_INA238) += ina238.o obj-$(CONFIG_SENSORS_INA3221) += ina3221.o obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o obj-$(CONFIG_SENSORS_IT87) += it87.o diff --git a/drivers/hwmon/ina238.c b/drivers/hwmon/ina238.c new file mode 100644 index 0000000000..f9d031bdfe --- /dev/null +++ b/drivers/hwmon/ina238.c @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Texas Instruments INA238 power monitor chip + * Datasheet: https://www.ti.com/product/ina238 + * + * Copyright (C) 2021 Nathan Rossi + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* INA238 register definitions */ +#define INA238_CONFIG 0x0 +#define INA238_ADC_CONFIG 0x1 +#define INA238_SHUNT_CALIBRATION 0x2 +#define INA238_SHUNT_VOLTAGE 0x4 +#define INA238_BUS_VOLTAGE 0x5 +#define INA238_DIE_TEMP 0x6 +#define INA238_CURRENT 0x7 +#define INA238_POWER 0x8 +#define INA238_DIAG_ALERT 0xb +#define INA238_SHUNT_OVER_VOLTAGE 0xc +#define INA238_SHUNT_UNDER_VOLTAGE 0xd +#define INA238_BUS_OVER_VOLTAGE 0xe +#define INA238_BUS_UNDER_VOLTAGE 0xf +#define INA238_TEMP_LIMIT 0x10 +#define INA238_POWER_LIMIT 0x11 +#define INA238_DEVICE_ID 0x3f + +#define INA238_CONFIG_ADCRANGE BIT(4) + +#define INA238_DIAG_ALERT_TMPOL BIT(7) +#define INA238_DIAG_ALERT_SHNTOL BIT(6) +#define INA238_DIAG_ALERT_SHNTUL BIT(5) +#define INA238_DIAG_ALERT_BUSOL BIT(4) +#define INA238_DIAG_ALERT_BUSUL BIT(3) +#define INA238_DIAG_ALERT_POL BIT(2) + +#define INA238_REGISTERS 0x11 + +#define INA238_RSHUNT_DEFAULT 10000 /* uOhm */ + +/* Default configuration of device on reset. */ +#define INA238_CONFIG_DEFAULT 0 +/* 16 sample averaging, 1052us conversion time, continuous mode */ +#define INA238_ADC_CONFIG_DEFAULT 0xfb6a +/* Configure alerts to be based on averaged value (SLOWALERT) */ +#define INA238_DIAG_ALERT_DEFAULT 0x2000 +/* + * This driver uses a fixed calibration value in order to scale current/power + * based on a fixed shunt resistor value. This allows for conversion within the + * device to avoid integer limits whilst current/power accuracy is scaled + * relative to the shunt resistor value within the driver. This is similar to + * how the ina2xx driver handles current/power scaling. + * + * The end result of this is that increasing shunt values (from a fixed 20 mOhm + * shunt) increase the effective current/power accuracy whilst limiting the + * range and decreasing shunt values decrease the effective accuracy but + * increase the range. + * + * The value of the Current register is calculated given the following: + * Current (A) = (shunt voltage register * 5) * calibration / 81920 + * + * The maximum shunt voltage is 163.835 mV (0x7fff, ADC_RANGE = 0, gain = 4). + * With the maximum current value of 0x7fff and a fixed shunt value results in + * a calibration value of 16384 (0x4000). + * + * 0x7fff = (0x7fff * 5) * calibration / 81920 + * calibration = 0x4000 + * + * Equivalent calibration is applied for the Power register (maximum value for + * bus voltage is 102396.875 mV, 0x7fff), where the maximum power that can + * occur is ~16776192 uW (register value 0x147a8): + * + * This scaling means the resulting values for Current and Power registers need + * to be scaled by the difference between the fixed shunt resistor and the + * actual shunt resistor: + * + * shunt = 0x4000 / (819.2 * 10^6) / 0.001 = 20000 uOhms (with 1mA/lsb) + * + * Current (mA) = register value * 20000 / rshunt / 4 * gain + * Power (W) = 0.2 * register value * 20000 / rshunt / 4 * gain + */ +#define INA238_CALIBRATION_VALUE 16384 +#define INA238_FIXED_SHUNT 20000 + +#define INA238_SHUNT_VOLTAGE_LSB 5 /* 5 uV/lsb */ +#define INA238_BUS_VOLTAGE_LSB 3125 /* 3.125 mV/lsb */ +#define INA238_DIE_TEMP_LSB 125 /* 125 mC/lsb */ + +static struct regmap_config ina238_regmap_config = { + .max_register = INA238_REGISTERS, + .reg_bits = 8, + .val_bits = 16, +}; + +struct ina238_data { + struct i2c_client *client; + struct mutex config_lock; + struct regmap *regmap; + u32 rshunt; + u32 gain; +}; + +static int ina238_read_reg24(const struct i2c_client *client, u8 reg, u32 *val) +{ + u8 data[3]; + int err; + + /* 24-bit register read */ + err = i2c_smbus_read_i2c_block_data(client, reg, 3, data); + if (err != 3) + return err; + *val = (data[0] << 16) | (data[1] << 8) | data[2]; + + return 0; +} + +static int ina238_read_in(struct device *dev, u32 attr, int channel, + long *val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int reg, mask; + int regval; + int err; + + switch (channel) { + case 0: + switch (attr) { + case hwmon_in_input: + reg = INA238_SHUNT_VOLTAGE; + break; + case hwmon_in_max: + reg = INA238_SHUNT_OVER_VOLTAGE; + break; + case hwmon_in_min: + reg = INA238_SHUNT_UNDER_VOLTAGE; + break; + case hwmon_in_max_alarm: + reg = INA238_DIAG_ALERT; + mask = INA238_DIAG_ALERT_SHNTOL; + break; + case hwmon_in_min_alarm: + reg = INA238_DIAG_ALERT; + mask = INA238_DIAG_ALERT_SHNTUL; + break; + default: + return -EOPNOTSUPP; + } + break; + case 1: + switch (attr) { + case hwmon_in_input: + reg = INA238_BUS_VOLTAGE; + break; + case hwmon_in_max: + reg = INA238_BUS_OVER_VOLTAGE; + break; + case hwmon_in_min: + reg = INA238_BUS_UNDER_VOLTAGE; + break; + case hwmon_in_max_alarm: + reg = INA238_DIAG_ALERT; + mask = INA238_DIAG_ALERT_BUSOL; + break; + case hwmon_in_min_alarm: + reg = INA238_DIAG_ALERT; + mask = INA238_DIAG_ALERT_BUSUL; + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + err = regmap_read(data->regmap, reg, ®val); + if (err < 0) + return err; + + switch (attr) { + case hwmon_in_input: + case hwmon_in_max: + case hwmon_in_min: + /* signed register, value in mV */ + if (channel == 0) + /* gain of 1 -> LSB / 4 */ + *val = div_s64((s16)regval * INA238_SHUNT_VOLTAGE_LSB, + 1000 * (4 - data->gain + 1)); + else + *val = div_s64((s16)regval * INA238_BUS_VOLTAGE_LSB, + 1000); + break; + case hwmon_in_max_alarm: + case hwmon_in_min_alarm: + *val = regval & mask ? 1 : 0; + break; + } + + return 0; +} + +static int ina238_write_in(struct device *dev, u32 attr, int channel, + long val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int regval; + + if (attr != hwmon_in_max && attr != hwmon_in_min) + return -EOPNOTSUPP; + + /* convert decimal to register value */ + switch (channel) { + case 0: + /* signed */ + regval = div_s64((s64)val * 1000LL * (4 - data->gain + 1), + INA238_SHUNT_VOLTAGE_LSB); + if (regval > S16_MAX || regval < S16_MIN) + return -EINVAL; + + switch (attr) { + case hwmon_in_max: + return regmap_write(data->regmap, + INA238_SHUNT_OVER_VOLTAGE, regval); + case hwmon_in_min: + return regmap_write(data->regmap, + INA238_SHUNT_UNDER_VOLTAGE, regval); + default: + return -EOPNOTSUPP; + } + case 1: + regval = div_u64((u64)val * 1000ULL, INA238_BUS_VOLTAGE_LSB); + if (regval > U16_MAX || regval < 0) + return -EINVAL; + + switch (attr) { + case hwmon_in_max: + return regmap_write(data->regmap, + INA238_BUS_OVER_VOLTAGE, regval); + case hwmon_in_min: + return regmap_write(data->regmap, + INA238_BUS_UNDER_VOLTAGE, regval); + default: + return -EOPNOTSUPP; + } + default: + return -EOPNOTSUPP; + } +} + +static int ina238_read_current(struct device *dev, u32 attr, int channel, + long *val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int regval; + int err; + + if (channel != 0) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_curr_input: + err = regmap_read(data->regmap, INA238_CURRENT, ®val); + if (err < 0) + return err; + + /* Signed register, fixed 1mA current lsb. result in mA */ + *val = div_s64((s16)regval * INA238_FIXED_SHUNT * data->gain, + data->rshunt * 4); + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int ina238_read_power(struct device *dev, u32 attr, int channel, + long *val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + long long power; + int regval; + int err; + + if (channel != 0) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_power_input: + err = ina238_read_reg24(data->client, INA238_POWER, ®val); + if (err) + return err; + + /* Fixed 1mA lsb, scaled by 1000000 to have result in uW */ + power = div_u64(regval * 1000ULL * INA238_FIXED_SHUNT * + data->gain, 20 * data->rshunt); + /* Clamp value to maximum value of long */ + *val = clamp_val(power, 0, LONG_MAX); + break; + case hwmon_power_max: + err = regmap_read(data->regmap, INA238_POWER_LIMIT, ®val); + if (err) + return err; + + /* + * Truncated 24-bit compare register, lower 8-bits are + * truncated. Same conversion to/from uW as POWER register. + */ + power = div_u64((regval << 8) * 1000ULL * INA238_FIXED_SHUNT * + data->gain, 20 * data->rshunt); + /* Clamp value to maximum value of long */ + *val = clamp_val(power, 0, LONG_MAX); + break; + case hwmon_power_max_alarm: + err = regmap_read(data->regmap, INA238_DIAG_ALERT, ®val); + if (err) + return err; + + *val = regval & INA238_DIAG_ALERT_POL ? 1 : 0; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int ina238_write_power(struct device *dev, u32 attr, int channel, + long val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int regval; + + if (channel != 0 || attr != hwmon_power_max) + return -EOPNOTSUPP; + + /* + * Compared against the 24-bit power register, lower 8-bits are + * truncated. Same conversion to/from uW as POWER register. + */ + regval = div_u64((u64)val * 20ULL * data->rshunt, + 1000ULL * INA238_FIXED_SHUNT * (u64)data->gain); + regval = regval >> 8; + if (regval > U16_MAX || regval < 0) + return -EINVAL; + + return regmap_write(data->regmap, INA238_POWER_LIMIT, regval); +} + +static int ina238_read_temp(struct device *dev, u32 attr, int channel, + long *val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int regval; + int err; + + if (channel != 0) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_input: + err = regmap_read(data->regmap, INA238_DIE_TEMP, ®val); + if (err) + return err; + + /* Signed, bits 15-4 of register, result in mC */ + *val = ((s16)regval >> 4) * INA238_DIE_TEMP_LSB; + break; + case hwmon_temp_max: + err = regmap_read(data->regmap, INA238_TEMP_LIMIT, ®val); + if (err) + return err; + + /* Signed, bits 15-4 of register, result in mC */ + *val = ((s16)regval >> 4) * INA238_DIE_TEMP_LSB; + break; + case hwmon_temp_max_alarm: + err = regmap_read(data->regmap, INA238_DIAG_ALERT, ®val); + if (err) + return err; + + *val = regval & INA238_DIAG_ALERT_TMPOL ? 1 : 0; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int ina238_write_temp(struct device *dev, u32 attr, int channel, + long val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int regval; + + if (channel != 0 || attr != hwmon_temp_max) + return -EOPNOTSUPP; + + /* Signed, bits 15-4 of register */ + regval = (div_s64(val, INA238_DIE_TEMP_LSB) << 4); + if (regval > S16_MAX || regval < S16_MIN) + return -EINVAL; + regval = regval & 0xfff0; + + return regmap_write(data->regmap, INA238_TEMP_LIMIT, regval); +} + +static int ina238_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_in: + return ina238_read_in(dev, attr, channel, val); + case hwmon_curr: + return ina238_read_current(dev, attr, channel, val); + case hwmon_power: + return ina238_read_power(dev, attr, channel, val); + case hwmon_temp: + return ina238_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int ina238_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct ina238_data *data = dev_get_drvdata(dev); + int err; + + mutex_lock(&data->config_lock); + + switch (type) { + case hwmon_in: + err = ina238_write_in(dev, attr, channel, val); + break; + case hwmon_power: + err = ina238_write_power(dev, attr, channel, val); + break; + case hwmon_temp: + err = ina238_write_temp(dev, attr, channel, val); + break; + default: + err = -EOPNOTSUPP; + break; + } + + mutex_unlock(&data->config_lock); + return err; +} + +static umode_t ina238_is_visible(const void *drvdata, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + if (channel != 0 && channel != 1) + return 0; + + switch (attr) { + case hwmon_in_input: + case hwmon_in_max_alarm: + case hwmon_in_min_alarm: + return 0444; + case hwmon_in_max: + case hwmon_in_min: + return 0644; + default: + return 0; + } + case hwmon_curr: + if (channel != 0) + return 0; + + switch (attr) { + case hwmon_curr_input: + return 0444; + default: + return 0; + } + case hwmon_power: + if (channel != 0) + return 0; + + switch (attr) { + case hwmon_power_input: + case hwmon_power_max_alarm: + return 0444; + case hwmon_power_max: + return 0644; + default: + return 0; + } + case hwmon_temp: + if (channel != 0) + return 0; + + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_max_alarm: + return 0444; + case hwmon_temp_max: + return 0644; + default: + return 0; + } + default: + return 0; + } +} + +#define INA238_HWMON_IN_CONFIG (HWMON_I_INPUT | \ + HWMON_I_MAX | HWMON_I_MAX_ALARM | \ + HWMON_I_MIN | HWMON_I_MIN_ALARM) + +static const struct hwmon_channel_info *ina238_info[] = { + HWMON_CHANNEL_INFO(in, + /* 0: shunt voltage */ + INA238_HWMON_IN_CONFIG, + /* 1: bus voltage */ + INA238_HWMON_IN_CONFIG), + HWMON_CHANNEL_INFO(curr, + /* 0: current through shunt */ + HWMON_C_INPUT), + HWMON_CHANNEL_INFO(power, + /* 0: power */ + HWMON_P_INPUT | HWMON_P_MAX | HWMON_P_MAX_ALARM), + HWMON_CHANNEL_INFO(temp, + /* 0: die temperature */ + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_ALARM), + NULL +}; + +static const struct hwmon_ops ina238_hwmon_ops = { + .is_visible = ina238_is_visible, + .read = ina238_read, + .write = ina238_write, +}; + +static const struct hwmon_chip_info ina238_chip_info = { + .ops = &ina238_hwmon_ops, + .info = ina238_info, +}; + +static int ina238_probe(struct i2c_client *client) +{ + struct ina2xx_platform_data *pdata = dev_get_platdata(&client->dev); + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct ina238_data *data; + int config; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + /* set the device type */ + mutex_init(&data->config_lock); + + data->regmap = devm_regmap_init_i2c(client, &ina238_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(data->regmap); + } + + /* load shunt value */ + data->rshunt = INA238_RSHUNT_DEFAULT; + if (device_property_read_u32(dev, "shunt-resistor", &data->rshunt) < 0 && + pdata) + data->rshunt = pdata->shunt_uohms; + if (data->rshunt == 0) { + dev_err(dev, "invalid shunt resister value %u\n", data->rshunt); + return -EINVAL; + } + + /* load shunt gain value */ + if (device_property_read_u32(dev, "ti,shunt-gain", &data->gain) < 0) + data->gain = 4; /* Default of ADCRANGE = 0 */ + if (data->gain != 1 && data->gain != 4) { + dev_err(dev, "invalid shunt gain value %u\n", data->gain); + return -EINVAL; + } + + /* Setup CONFIG register */ + config = INA238_CONFIG_DEFAULT; + if (data->gain == 1) + config |= INA238_CONFIG_ADCRANGE; /* ADCRANGE = 1 is /1 */ + ret = regmap_write(data->regmap, INA238_CONFIG, config); + if (ret < 0) { + dev_err(dev, "error configuring the device: %d\n", ret); + return -ENODEV; + } + + /* Setup ADC_CONFIG register */ + ret = regmap_write(data->regmap, INA238_ADC_CONFIG, + INA238_ADC_CONFIG_DEFAULT); + if (ret < 0) { + dev_err(dev, "error configuring the device: %d\n", ret); + return -ENODEV; + } + + /* Setup SHUNT_CALIBRATION register with fixed value */ + ret = regmap_write(data->regmap, INA238_SHUNT_CALIBRATION, + INA238_CALIBRATION_VALUE); + if (ret < 0) { + dev_err(dev, "error configuring the device: %d\n", ret); + return -ENODEV; + } + + /* Setup alert/alarm configuration */ + ret = regmap_write(data->regmap, INA238_DIAG_ALERT, + INA238_DIAG_ALERT_DEFAULT); + if (ret < 0) { + dev_err(dev, "error configuring the device: %d\n", ret); + return -ENODEV; + } + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, + &ina238_chip_info, + NULL); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(dev, "power monitor %s (Rshunt = %u uOhm, gain = %u)\n", + client->name, data->rshunt, data->gain); + + return 0; +} + +static const struct i2c_device_id ina238_id[] = { + { "ina238", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ina238_id); + +static const struct of_device_id __maybe_unused ina238_of_match[] = { + { .compatible = "ti,ina238" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ina238_of_match); + +static struct i2c_driver ina238_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ina238", + .of_match_table = of_match_ptr(ina238_of_match), + }, + .probe_new = ina238_probe, + .id_table = ina238_id, +}; + +module_i2c_driver(ina238_driver); + +MODULE_AUTHOR("Nathan Rossi "); +MODULE_DESCRIPTION("ina238 driver"); +MODULE_LICENSE("GPL"); --- 2.33.0