Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To:     <hminas@synopsys.com>, <gregkh@linuxfoundation.org>,
        <robh+dt@kernel.org>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <devicetree@vger.kernel.org>, <amelie.delaunay@foss.st.com>,
        <fabrice.gasnier@foss.st.com>, <alexandre.torgue@foss.st.com>
Subject: [PATCH v2] dt-bindings: usb: dwc2: document the port when usb-role-switch is used
Date:   Wed, 27 Oct 2021 14:12:32 +0200
Message-ID: <1635336752-14796-1-git-send-email-fabrice.gasnier@foss.st.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Document the "port" property, which is used with "usb-role-switch"
to describe the bus connector.
Definition is inspired from mediatek,mtu3.yaml.

This fixes some errors seen when running "make dtbs_check":
... 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: ... Documentation/devicetree/bindings/usb/dwc2.yaml

Note: add dependencies so that 'usb-role-switch' without port is valid or
both must be present.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
Changes in v2:
Rob's review comments:
- drop reference to graph.txt
- drop unneeded quotes
---
 Documentation/devicetree/bindings/usb/dwc2.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 10c7d9b..a351f3c 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -130,6 +130,16 @@ properties:
     description: If present indicates that we need to reset the PHY when we 
       detect a wakeup. This is due to a hardware errata.
 
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+dependencies:
+  port: [ usb-role-switch ]
+
 required:
   - compatible
   - reg
-- 
2.7.4