Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753703AbXACDHb (ORCPT ); Tue, 2 Jan 2007 22:07:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753902AbXACDHb (ORCPT ); Tue, 2 Jan 2007 22:07:31 -0500 Received: from smtp104.sbc.mail.mud.yahoo.com ([68.142.198.203]:42038 "HELO smtp104.sbc.mail.mud.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753703AbXACDHa (ORCPT ); Tue, 2 Jan 2007 22:07:30 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=pacbell.net; h=Received:X-YMail-OSG:From:To:Subject:Date:User-Agent:Cc:References:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Content-Disposition:Message-Id; b=vETVqVjEyhGQHiZwSs+XkqM1M9XUVicRZS+Z3dUt/t9VNkSQMCaX2WyDIdIfOUyCm7GJnbAvk8E5o57o7hUglj0N1gD55IggU85VYb3Our7l57WnC1RCmZBlyEyimH+WvshBrYNyBkF81jjJoji1wNvvLvd6ePDzn+GUWJ+qngQ= ; X-YMail-OSG: ezWa0wwVM1nXlTnosKj8Gosj1nSOOb5z5mkZu3jtPAsXjnkKR5gCpuyqM6j3Cftp0BpYtdJPp2.kAURbNfIiq_E8vp.CanULE6_YdVZbEZijaagFea1EdIrH44Z4FjsPoQCkY0fKhWYG3go- From: David Brownell To: "Voipio Riku" Subject: Re: [patch 2.6.19-git] rts-rs5c372 updates: more chips, alarm, 12hr mode, etc Date: Tue, 2 Jan 2007 19:07:24 -0800 User-Agent: KMail/1.7.1 Cc: rtc-linux@googlegroups.com, "Linux Kernel list" , "Alessandro Zummo" , dan.j.williams@intel.com, i2c@lm-sensors.org References: <200612081859.42995.david-b@pacbell.net> <42003.80.222.56.248.1165875783.squirrel@webmail.movial.fi> <200612120030.44554.david-b@pacbell.net> In-Reply-To: <200612120030.44554.david-b@pacbell.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200701021907.25701.david-b@pacbell.net> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 21907 Lines: 761 Hi Voipio, Yes, the patch you sent (switching to "method 3" to work around the evident bug in the i2c-ixp3xx driver) works on the platform I was using too (after unrelated tweaks). Here's an updated patch, using "method 3". If it still behaves for you, it'd seem ready to merge... - Dave ============ CUT HERE Update the rtc-rs5c372 driver: Bugfixes: - Handle RTCs which are configured to use 12-hour mode. - Never report bogus/un-initialized times. - Displaying "raw trim" requires not masking it first! - Fix the and sysfs procfs display of crystal and trim data. Features: - Handle other RTCs in this family, notably rv5c386/rv5c387. - Declare the other registers. - Provide alarm get/set functionality. - Handle AIE and UIE; but no IRQ handling yet. - Warn if the clock needs to be set. Cleanup: - Shrink object by not including needless sysfs or procfs support - We don't need no steenkin' forward declarations. (Except one.) Until the I2C framework merges "new style" driver support, matching the driver model better, using rv5c chips or alarm IRQs requires a separate board-specific patch. (And an IRQ handler, handing off labor through a work_struct...) This uses the "method 3" register reads, but notes that it's done to work around an evident i2c adapter driver bug, and the curious issue where the chip behavior disagrees with the chip docs. Signed-off-by: David Brownell Index: g26/drivers/rtc/rtc-rs5c372.c =================================================================== --- g26.orig/drivers/rtc/rtc-rs5c372.c 2006-12-27 17:19:55.000000000 -0800 +++ g26/drivers/rtc/rtc-rs5c372.c 2007-01-02 18:44:35.000000000 -0800 @@ -1,5 +1,5 @@ /* - * An I2C driver for the Ricoh RS5C372 RTC + * An I2C driver for Ricoh RS5C372 and RV5C38[67] RTCs * * Copyright (C) 2005 Pavel Mironchik * Copyright (C) 2006 Tower Technologies @@ -13,7 +13,7 @@ #include #include -#define DRV_VERSION "0.3" +#define DRV_VERSION "0.4" /* Addresses to scan */ static unsigned short normal_i2c[] = { /* 0x32,*/ I2C_CLIENT_END }; @@ -21,6 +21,13 @@ static unsigned short normal_i2c[] = { / /* Insmod parameters */ I2C_CLIENT_INSMOD; + +/* + * Ricoh has a family of I2C based RTCs, which differ only slightly from + * each other. Differences center on pinout (e.g. how many interrupts, + * output clock, etc) and how the control registers are used. The '372 + * is significant only because that's the one this driver first supported. + */ #define RS5C372_REG_SECS 0 #define RS5C372_REG_MINS 1 #define RS5C372_REG_HOURS 2 @@ -29,59 +36,142 @@ I2C_CLIENT_INSMOD; #define RS5C372_REG_MONTH 5 #define RS5C372_REG_YEAR 6 #define RS5C372_REG_TRIM 7 +# define RS5C372_TRIM_XSL 0x80 +# define RS5C372_TRIM_MASK 0x7F -#define RS5C372_TRIM_XSL 0x80 -#define RS5C372_TRIM_MASK 0x7F - -#define RS5C372_REG_BASE 0 - -static int rs5c372_attach(struct i2c_adapter *adapter); -static int rs5c372_detach(struct i2c_client *client); -static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind); +#define RS5C_REG_ALARM_A_MIN 8 /* or ALARM_W */ +#define RS5C_REG_ALARM_A_HOURS 9 +#define RS5C_REG_ALARM_A_WDAY 10 + +#define RS5C_REG_ALARM_B_MIN 11 /* or ALARM_D */ +#define RS5C_REG_ALARM_B_HOURS 12 +#define RS5C_REG_ALARM_B_WDAY 13 /* (ALARM_B only) */ + +#define RS5C_REG_CTRL1 14 +# define RS5C_CTRL1_AALE (1 << 7) /* or WALE */ +# define RS5C_CTRL1_BALE (1 << 6) /* or DALE */ +# define RV5C387_CTRL1_24 (1 << 5) +# define RS5C372A_CTRL1_SL1 (1 << 5) +# define RS5C_CTRL1_CT_MASK (7 << 0) +# define RS5C_CTRL1_CT0 (0 << 0) /* no periodic irq */ +# define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */ +#define RS5C_REG_CTRL2 15 +# define RS5C372_CTRL2_24 (1 << 5) +# define RS5C_CTRL2_XSTP (1 << 4) +# define RS5C_CTRL2_CTFG (1 << 2) +# define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */ +# define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */ + + +/* to read (style 1) or write registers starting at R */ +#define RS5C_ADDR(R) (((R) << 4) | 0) + + +enum rtc_type { + rtc_undef = 0, + rtc_rs5c372a, + rtc_rs5c372b, + rtc_rv5c386, + rtc_rv5c387a, +}; +/* REVISIT: this assumes that: + * - we're in the 21st century, so it's safe to ignore the century + * bit for rv5c38[67] (REG_MONTH bit 7); + * - we should use ALARM_A not ALARM_B (may be wrong on some boards) + */ struct rs5c372 { - u8 reg_addr; - u8 regs[17]; - struct i2c_msg msg[1]; - struct i2c_client client; - struct rtc_device *rtc; -}; + struct i2c_client *client; + struct rtc_device *rtc; + enum rtc_type type; + unsigned time24:1; + unsigned has_irq:1; + char buf[17]; + char *regs; -static struct i2c_driver rs5c372_driver = { - .driver = { - .name = "rs5c372", - }, - .attach_adapter = &rs5c372_attach, - .detach_client = &rs5c372_detach, + /* on conversion to a "new style" i2c driver, this vanishes */ + struct i2c_client dev; }; -static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm) +static int rs5c_get_regs(struct rs5c372 *rs5c) { - - struct rs5c372 *rs5c372 = i2c_get_clientdata(client); - u8 *buf = &(rs5c372->regs[1]); - - /* this implements the 3rd reading method, according - * to the datasheet. rs5c372 defaults to internal - * address 0xF, so 0x0 is in regs[1] + struct i2c_client *client = rs5c->client; + struct i2c_msg msgs[] = { + { client->addr, I2C_M_RD, sizeof rs5c->buf, rs5c->buf }, + }; + + /* This implements the third reading method from the datasheet, using + * an internal address that's reset after each transaction (by STOP) + * to 0x0f ... so we read extra registers, and skip the first one. + * + * The first method doesn't work with the iop3xx adapter driver, on at + * least 80219 chips; this works around that bug. */ - - if ((i2c_transfer(client->adapter, rs5c372->msg, 1)) != 1) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + if ((i2c_transfer(client->adapter, msgs, 1)) != 1) { + pr_debug("%s: can't read registers\n", rs5c->rtc->name); return -EIO; } - tm->tm_sec = BCD2BIN(buf[RS5C372_REG_SECS] & 0x7f); - tm->tm_min = BCD2BIN(buf[RS5C372_REG_MINS] & 0x7f); - tm->tm_hour = BCD2BIN(buf[RS5C372_REG_HOURS] & 0x3f); - tm->tm_wday = BCD2BIN(buf[RS5C372_REG_WDAY] & 0x07); - tm->tm_mday = BCD2BIN(buf[RS5C372_REG_DAY] & 0x3f); + dev_dbg(&client->dev, + "%02x %02x %02x (%02x) %02x %02x %02x (%02x), " + "%02x %02x %02x, %02x %02x %02x; %02x %02x\n", + rs5c->regs[0], rs5c->regs[1], rs5c->regs[2], rs5c->regs[3], + rs5c->regs[4], rs5c->regs[5], rs5c->regs[6], rs5c->regs[7], + rs5c->regs[8], rs5c->regs[9], rs5c->regs[10], rs5c->regs[11], + rs5c->regs[12], rs5c->regs[13], rs5c->regs[14], rs5c->regs[15]); + + return 0; +} + +static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg) +{ + unsigned hour; + + if (rs5c->time24) + return BCD2BIN(reg & 0x3f); + + hour = BCD2BIN(reg & 0x1f); + if (hour == 12) + hour = 0; + if (reg & 0x20) + hour += 12; + return hour; +} + +static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour) +{ + if (rs5c->time24) + return BIN2BCD(hour); + + if (hour > 12) + return 0x20 | BIN2BCD(hour - 12); + if (hour == 12) + return 0x20 | BIN2BCD(12); + if (hour == 0) + return BIN2BCD(12); + return BIN2BCD(hour); +} + +static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + struct rs5c372 *rs5c = i2c_get_clientdata(client); + int status = rs5c_get_regs(rs5c); + + if (status < 0) + return status; + + tm->tm_sec = BCD2BIN(rs5c->regs[RS5C372_REG_SECS] & 0x7f); + tm->tm_min = BCD2BIN(rs5c->regs[RS5C372_REG_MINS] & 0x7f); + tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]); + + tm->tm_wday = BCD2BIN(rs5c->regs[RS5C372_REG_WDAY] & 0x07); + tm->tm_mday = BCD2BIN(rs5c->regs[RS5C372_REG_DAY] & 0x3f); /* tm->tm_mon is zero-based */ - tm->tm_mon = BCD2BIN(buf[RS5C372_REG_MONTH] & 0x1f) - 1; + tm->tm_mon = BCD2BIN(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1; /* year is 1900 + tm->tm_year */ - tm->tm_year = BCD2BIN(buf[RS5C372_REG_YEAR]) + 100; + tm->tm_year = BCD2BIN(rs5c->regs[RS5C372_REG_YEAR]) + 100; dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", @@ -89,22 +179,25 @@ static int rs5c372_get_datetime(struct i tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - return 0; + /* rtc might need initialization */ + return rtc_valid_tm(tm); } static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm) { - unsigned char buf[8] = { RS5C372_REG_BASE }; + struct rs5c372 *rs5c = i2c_get_clientdata(client); + unsigned char buf[8]; - dev_dbg(&client->dev, - "%s: secs=%d, mins=%d, hours=%d " + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d " "mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, tm->tm_sec, tm->tm_min, tm->tm_hour, + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + buf[0] = RS5C_ADDR(RS5C372_REG_SECS); buf[1] = BIN2BCD(tm->tm_sec); buf[2] = BIN2BCD(tm->tm_min); - buf[3] = BIN2BCD(tm->tm_hour); + buf[3] = rs5c_hr2reg(rs5c, tm->tm_hour); buf[4] = BIN2BCD(tm->tm_wday); buf[5] = BIN2BCD(tm->tm_mday); buf[6] = BIN2BCD(tm->tm_mon + 1); @@ -118,21 +211,43 @@ static int rs5c372_set_datetime(struct i return 0; } +#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) +#define NEED_TRIM +#endif + +#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) +#define NEED_TRIM +#endif + +#ifdef NEED_TRIM static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim) { struct rs5c372 *rs5c372 = i2c_get_clientdata(client); - u8 tmp = rs5c372->regs[RS5C372_REG_TRIM + 1]; + u8 tmp = rs5c372->regs[RS5C372_REG_TRIM]; if (osc) *osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768; if (trim) { - *trim = tmp & RS5C372_TRIM_MASK; - dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, *trim); + dev_dbg(&client->dev, "%s: raw trim=%x\n", __FUNCTION__, tmp); + tmp &= RS5C372_TRIM_MASK; + if (tmp & 0x3e) { + int t = tmp & 0x3f; + + if (tmp & 0x40) + t = (~t | (s8)0xc0) + 1; + else + t = t - 1; + + tmp = t * 2; + } else + tmp = 0; + *trim = tmp; } return 0; } +#endif static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm) { @@ -144,25 +259,190 @@ static int rs5c372_rtc_set_time(struct d return rs5c372_set_datetime(to_i2c_client(dev), tm); } +#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE) + +static int +rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct i2c_client *client = to_i2c_client(dev); + struct rs5c372 *rs5c = i2c_get_clientdata(client); + unsigned char buf[2]; + int status; + + buf[1] = rs5c->regs[RS5C_REG_CTRL1]; + switch (cmd) { + case RTC_UIE_OFF: + case RTC_UIE_ON: + /* some 327a modes use a different IRQ pin for 1Hz irqs */ + if (rs5c->type == rtc_rs5c372a + && (buf[1] & RS5C372A_CTRL1_SL1)) + return -ENOIOCTLCMD; + case RTC_AIE_OFF: + case RTC_AIE_ON: + /* these irq management calls only make sense for chips + * which are wired up to an IRQ. + */ + if (!rs5c->has_irq) + return -ENOIOCTLCMD; + break; + default: + return -ENOIOCTLCMD; + } + + status = rs5c_get_regs(rs5c); + if (status < 0) + return status; + + buf[0] = RS5C_ADDR(RS5C_REG_CTRL1); + switch (cmd) { + case RTC_AIE_OFF: /* alarm off */ + buf[1] &= ~RS5C_CTRL1_AALE; + break; + case RTC_AIE_ON: /* alarm on */ + buf[1] |= RS5C_CTRL1_AALE; + break; + case RTC_UIE_OFF: /* update off */ + buf[1] &= ~RS5C_CTRL1_CT_MASK; + break; + case RTC_UIE_ON: /* update on */ + buf[1] &= ~RS5C_CTRL1_CT_MASK; + buf[1] |= RS5C_CTRL1_CT4; + break; + } + if ((i2c_master_send(client, buf, 2)) != 2) { + printk(KERN_WARNING "%s: can't update alarm\n", + rs5c->rtc->name); + status = -EIO; + } else + rs5c->regs[RS5C_REG_CTRL1] = buf[1]; + return status; +} + +#else +#define rs5c_rtc_ioctl NULL +#endif + + +/* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI, + * which only exposes a polled programming interface; and since + * these calls map directly to those EFI requests; we don't demand + * we have an IRQ for this chip when we go through this API. + * + * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs + * though, managed through RTC_AIE_{ON,OFF} requests. + */ + +static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct i2c_client *client = to_i2c_client(dev); + struct rs5c372 *rs5c = i2c_get_clientdata(client); + int status; + + status = rs5c_get_regs(rs5c); + if (status < 0) + return status; + + /* report alarm time */ + t->time.tm_sec = 0; + t->time.tm_min = BCD2BIN(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f); + t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]); + t->time.tm_mday = -1; + t->time.tm_mon = -1; + t->time.tm_year = -1; + t->time.tm_wday = -1; + t->time.tm_yday = -1; + t->time.tm_isdst = -1; + + /* ... and status */ + t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE); + t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG); + + return 0; +} + +static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct i2c_client *client = to_i2c_client(dev); + struct rs5c372 *rs5c = i2c_get_clientdata(client); + int status; + unsigned char buf[4]; + + /* only handle up to 24 hours in the future, like RTC_ALM_SET */ + if (t->time.tm_mday != -1 + || t->time.tm_mon != -1 + || t->time.tm_year != -1) + return -EINVAL; + + /* REVISIT: round up tm_sec */ + + /* if needed, disable irq (clears pending status) */ + status = rs5c_get_regs(rs5c); + if (status < 0) + return status; + if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) { + buf[0] = RS5C_ADDR(RS5C_REG_CTRL1); + buf[1] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE; + if (i2c_master_send(client, buf, 2) != 2) { + pr_debug("%s: can't disable alarm\n", rs5c->rtc->name); + return -EIO; + } + rs5c->regs[RS5C_REG_CTRL1] = buf[1]; + } + + /* set alarm */ + buf[0] = RS5C_ADDR(RS5C_REG_ALARM_A_MIN); + buf[1] = BIN2BCD(t->time.tm_min); + buf[2] = rs5c_hr2reg(rs5c, t->time.tm_hour); + buf[3] = 0x7f; /* any/all days */ + if ((i2c_master_send(client, buf, 4)) != 4) { + pr_debug("%s: can't set alarm time\n", rs5c->rtc->name); + return -EIO; + } + + /* ... and maybe enable its irq */ + if (t->enabled) { + buf[0] = RS5C_ADDR(RS5C_REG_CTRL1); + buf[1] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE; + if ((i2c_master_send(client, buf, 2)) != 2) + printk(KERN_WARNING "%s: can't enable alarm\n", + rs5c->rtc->name); + rs5c->regs[RS5C_REG_CTRL1] = buf[1]; + } + + return 0; +} + +#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) + static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq) { int err, osc, trim; err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim); if (err == 0) { - seq_printf(seq, "%d.%03d KHz\n", osc / 1000, osc % 1000); - seq_printf(seq, "trim\t: %d\n", trim); + seq_printf(seq, "crystal\t\t: %d.%03d KHz\n", + osc / 1000, osc % 1000); + seq_printf(seq, "trim\t\t: %d\n", trim); } return 0; } +#else +#define rs5c372_rtc_proc NULL +#endif + static const struct rtc_class_ops rs5c372_rtc_ops = { .proc = rs5c372_rtc_proc, + .ioctl = rs5c_rtc_ioctl, .read_time = rs5c372_rtc_read_time, .set_time = rs5c372_rtc_set_time, + .read_alarm = rs5c_read_alarm, + .set_alarm = rs5c_set_alarm, }; +#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) + static ssize_t rs5c372_sysfs_show_trim(struct device *dev, struct device_attribute *attr, char *buf) { @@ -172,7 +452,7 @@ static ssize_t rs5c372_sysfs_show_trim(s if (err) return err; - return sprintf(buf, "0x%2x\n", trim); + return sprintf(buf, "%d\n", trim); } static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL); @@ -189,16 +469,35 @@ static ssize_t rs5c372_sysfs_show_osc(st } static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL); -static int rs5c372_attach(struct i2c_adapter *adapter) +static int rs5c_sysfs_register(struct device *dev) { - return i2c_probe(adapter, &addr_data, rs5c372_probe); + int err; + + err = device_create_file(dev, &dev_attr_trim); + if (err) + return err; + err = device_create_file(dev, &dev_attr_osc); + if (err) + device_remove_file(dev, &dev_attr_trim); + + return err; +} + +#else +static int rs5c_sysfs_register(struct device *dev) +{ + return 0; } +#endif /* SYSFS */ + +static struct i2c_driver rs5c372_driver; static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind) { int err = 0; struct i2c_client *client; struct rs5c372 *rs5c372; + struct rtc_time tm; dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); @@ -211,7 +510,15 @@ static int rs5c372_probe(struct i2c_adap err = -ENOMEM; goto exit; } - client = &rs5c372->client; + + /* we read registers 0x0f then 0x00-0x0f; skip the first one */ + rs5c372->regs=&rs5c372->buf[1]; + + /* On conversion to a "new style" i2c driver, we'll be handed + * the i2c_client (we won't create it) + */ + client = &rs5c372->dev; + rs5c372->client = client; /* I2C client */ client->addr = address; @@ -222,16 +529,99 @@ static int rs5c372_probe(struct i2c_adap i2c_set_clientdata(client, rs5c372); - rs5c372->msg[0].addr = address; - rs5c372->msg[0].flags = I2C_M_RD; - rs5c372->msg[0].len = sizeof(rs5c372->regs); - rs5c372->msg[0].buf = rs5c372->regs; - /* Inform the i2c layer */ if ((err = i2c_attach_client(client))) goto exit_kfree; - dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + err = rs5c_get_regs(rs5c372); + if (err < 0) + goto exit_detach; + + /* For "new style" drivers, irq is in i2c_client and chip type + * info comes from i2c_client.dev.platform_data. Meanwhile: + * + * STICK BOARD-SPECIFIC SETUP CODE RIGHT HERE + */ + if (rs5c372->type == rtc_undef) { + rs5c372->type = rtc_rs5c372b; + dev_warn(&client->dev, "assuming rs5c372b\n"); + } + + /* clock may be set for am/pm or 24 hr time */ + switch (rs5c372->type) { + case rtc_rs5c372a: + case rtc_rs5c372b: + /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b. + * so does periodic irq, except some 327a modes. + */ + if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24) + rs5c372->time24 = 1; + break; + case rtc_rv5c386: + case rtc_rv5c387a: + if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24) + rs5c372->time24 = 1; + /* alarm uses ALARM_W; and nINTRB for alarm and periodic + * irq, on both 386 and 387 + */ + break; + default: + dev_err(&client->dev, "unknown RTC type\n"); + goto exit_detach; + } + + /* if the oscillator lost power and no other software (like + * the bootloader) set it up, do it here. + */ + if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP) { + unsigned char buf[3]; + + rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP; + + buf[0] = RS5C_ADDR(RS5C_REG_CTRL1); + buf[1] = rs5c372->regs[RS5C_REG_CTRL1]; + buf[2] = rs5c372->regs[RS5C_REG_CTRL2]; + + /* use 24hr mode */ + switch (rs5c372->type) { + case rtc_rs5c372a: + case rtc_rs5c372b: + buf[2] |= RS5C372_CTRL2_24; + rs5c372->time24 = 1; + break; + case rtc_rv5c386: + case rtc_rv5c387a: + buf[1] |= RV5C387_CTRL1_24; + rs5c372->time24 = 1; + break; + default: + /* impossible */ + break; + } + + if ((i2c_master_send(client, buf, 3)) != 3) { + dev_err(&client->dev, "setup error\n"); + goto exit_detach; + } + rs5c372->regs[RS5C_REG_CTRL1] = buf[1]; + rs5c372->regs[RS5C_REG_CTRL2] = buf[2]; + } + + if (rs5c372_get_datetime(client, &tm) < 0) + dev_warn(&client->dev, "clock needs to be set\n"); + + dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n", + ({ char *s; switch (rs5c372->type) { + case rtc_rs5c372a: s = "rs5c372a"; break; + case rtc_rs5c372b: s = "rs5c372b"; break; + case rtc_rv5c386: s = "rv5c386"; break; + case rtc_rv5c387a: s = "rv5c387a"; break; + default: s = "chip"; break; + }; s;}), + rs5c372->time24 ? "24hr" : "am/pm" + ); + + /* FIXME when client->irq exists, use it to register alarm irq */ rs5c372->rtc = rtc_device_register(rs5c372_driver.driver.name, &client->dev, &rs5c372_rtc_ops, THIS_MODULE); @@ -241,18 +631,12 @@ static int rs5c372_probe(struct i2c_adap goto exit_detach; } - err = device_create_file(&client->dev, &dev_attr_trim); + err = rs5c_sysfs_register(&client->dev); if (err) goto exit_devreg; - err = device_create_file(&client->dev, &dev_attr_osc); - if (err) - goto exit_trim; return 0; -exit_trim: - device_remove_file(&client->dev, &dev_attr_trim); - exit_devreg: rtc_device_unregister(rs5c372->rtc); @@ -266,6 +650,11 @@ exit: return err; } +static int rs5c372_attach(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, rs5c372_probe); +} + static int rs5c372_detach(struct i2c_client *client) { int err; @@ -274,6 +663,8 @@ static int rs5c372_detach(struct i2c_cli if (rs5c372->rtc) rtc_device_unregister(rs5c372->rtc); + /* REVISIT properly destroy the sysfs files ... */ + if ((err = i2c_detach_client(client))) return err; @@ -281,6 +672,14 @@ static int rs5c372_detach(struct i2c_cli return 0; } +static struct i2c_driver rs5c372_driver = { + .driver = { + .name = "rtc-rs5c372", + }, + .attach_adapter = &rs5c372_attach, + .detach_client = &rs5c372_detach, +}; + static __init int rs5c372_init(void) { return i2c_add_driver(&rs5c372_driver); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/