Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lukas Bulwahn <lukas.bulwahn@gmail.com>
To:     Russell King <linux@armlinux.org.uk>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        Sekhar Nori <nsekhar@ti.com>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Linus Walleij <linusw@kernel.org>,
        Imre Kaloz <kaloz@openwrt.org>,
        Krzysztof Halasa <khalasa@piap.pl>,
        Avi Fishman <avifishman70@gmail.com>,
        Tomer Maimon <tmaimon77@gmail.com>,
        Tali Perry <tali.perry1@gmail.com>,
        Patrick Venture <venture@google.com>,
        Nancy Yuen <yuenn@google.com>,
        Benjamin Fair <benjaminfair@google.com>,
        Dinh Nguyen <dinguyen@kernel.org>,
        Arnd Bergmann <arnd@arndb.de>,
        linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org
Cc:     kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org,
        Lukas Bulwahn <lukas.bulwahn@gmail.com>
Subject: [PATCH 07/13] arm: imx: remove dead left-over from i.MX{27,31,35} removal
Date:   Thu, 28 Oct 2021 16:19:32 +0200
Message-Id: <20211028141938.3530-8-lukas.bulwahn@gmail.com>
In-Reply-To: <20211028141938.3530-1-lukas.bulwahn@gmail.com>
References: <20211028141938.3530-1-lukas.bulwahn@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The commits:

  commit 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files")
  commit c93197b0041d ("ARM: imx: Remove i.MX31 board files")
  commit e1324ece2af4 ("ARM: imx: Remove i.MX35 board files")

remove the config MACH_MX27_3DS, MACH_MX31_3DS and MACH_MX35_3DS.
Commit a542fc18168c ("ARM: imx31: Remove remaining i.MX31 board code")
further removes arch/arm/mach-imx/3ds_debugboard.{c,h}. So, only some
dead left-over in Kconfig and Makefile remains.

Remove this remaining left-over.

This issue was identified with ./scripts/checkkconfigsymbols.py,
which warns on references to the non-existing configs
MACH_MX{27,31,35}_3DS in ./arch/arm/mach-imx/Kconfig.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 arch/arm/mach-imx/Kconfig  | 12 ------------
 arch/arm/mach-imx/Makefile |  2 --
 2 files changed, 14 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b407b024dde3..f296bac467c8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -21,18 +21,6 @@ config MXC_TZIC
 config MXC_AVIC
 	bool
 
-config MXC_DEBUG_BOARD
-	bool "Enable MXC debug board(for 3-stack)"
-	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
-	help
-	  The debug board is an integral part of the MXC 3-stack(PDK)
-	  platforms, it can be attached or removed from the peripheral
-	  board. On debug board, several debug devices(ethernet, UART,
-	  buttons, LEDs and JTAG) are implemented. Between the MCU and
-	  these devices, a CPLD is added as a bridge which performs
-	  data/address de-multiplexing and decode, signal level shift,
-	  interrupt control and various board functions.
-
 config HAVE_IMX_ANATOP
 	bool
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d1506ef7a537..d5291ed9186a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -14,8 +14,6 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
-- 
2.26.2