Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lukas Bulwahn <lukas.bulwahn@gmail.com>
To:     Russell King <linux@armlinux.org.uk>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        Sekhar Nori <nsekhar@ti.com>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Linus Walleij <linusw@kernel.org>,
        Imre Kaloz <kaloz@openwrt.org>,
        Krzysztof Halasa <khalasa@piap.pl>,
        Avi Fishman <avifishman70@gmail.com>,
        Tomer Maimon <tmaimon77@gmail.com>,
        Tali Perry <tali.perry1@gmail.com>,
        Patrick Venture <venture@google.com>,
        Nancy Yuen <yuenn@google.com>,
        Benjamin Fair <benjaminfair@google.com>,
        Dinh Nguyen <dinguyen@kernel.org>,
        Arnd Bergmann <arnd@arndb.de>,
        linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org
Cc:     kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org,
        Lukas Bulwahn <lukas.bulwahn@gmail.com>
Subject: [PATCH 09/13] arm: milbeaut: remove select of non-existing PINCTRL_MILBEAUT
Date:   Thu, 28 Oct 2021 16:19:34 +0200
Message-Id: <20211028141938.3530-10-lukas.bulwahn@gmail.com>
In-Reply-To: <20211028141938.3530-1-lukas.bulwahn@gmail.com>
References: <20211028141938.3530-1-lukas.bulwahn@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The patch series "Add basic support for Socionext Milbeaut M10V SoC" (see
Link) introduced the config ARCH_MILBEAUT_M10V "Milbeaut SC2000/M10V
platform" in ./arch/arm/mach-milbeaut/ and intended to introduce timer,
clock, pinctrl and serial controller drivers.

However, during patch submission in March 2019, the introduction of the
milbeaut pinctrl driver was dropped from v2 to v3 of the patch series.
Since then, there was no further patch series to add this pinctrl driver
later on.

Hence, selecting PINCTRL_MILBEAUT in config is simply dangling and
referring to a non-existing config symbols.
Fortunately, ./scripts/checkkconfigsymbols.py warns:

PINCTRL_MILBEAUT
Referencing files: arch/arm/mach-milbeaut/Kconfig

Remove this select of the non-existing PINCTRL_MILBEAUT for now.

Link: https://lore.kernel.org/linux-arm-kernel/1551243056-10521-1-git-send-email-sugaya.taichi@socionext.com/

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 arch/arm/mach-milbeaut/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-milbeaut/Kconfig b/arch/arm/mach-milbeaut/Kconfig
index 6a576fd8521e..f9d1006f9442 100644
--- a/arch/arm/mach-milbeaut/Kconfig
+++ b/arch/arm/mach-milbeaut/Kconfig
@@ -13,7 +13,6 @@ config ARCH_MILBEAUT_M10V
 	select ARM_ARCH_TIMER
 	select MILBEAUT_TIMER
 	select PINCTRL
-	select PINCTRL_MILBEAUT
 	help
 	  Support for Socionext's MILBEAUT M10V based systems
 
-- 
2.26.2