Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 7/7] watchdog: s3c2410: Let kernel kick watchdog
To:     Sam Protsenko <semen.protsenko@linaro.org>,
        Wim Van Sebroeck <wim@linux-watchdog.org>,
        Guenter Roeck <linux@roeck-us.net>,
        Rob Herring <robh+dt@kernel.org>
Cc:     linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org
References: <20211028183527.3050-1-semen.protsenko@linaro.org>
 <20211028183527.3050-8-semen.protsenko@linaro.org>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Message-ID: <94e19dfb-5283-8826-c421-0ff140a370ab@canonical.com>
Date:   Fri, 29 Oct 2021 10:20:45 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.13.0
MIME-Version: 1.0
In-Reply-To: <20211028183527.3050-8-semen.protsenko@linaro.org>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 28/10/2021 20:35, Sam Protsenko wrote:
> When "tmr_atboot" module param is set, the watchdog is started in
> driver's probe. In that case, also set WDOG_HW_RUNNING bit to let
> watchdog core driver know it's running. This way wathcdog core can kick

s/wathcdog/watchdog/

> the watchdog for us (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED option is
> enabled), until user space takes control.

This does not explain why you move the code around. I guess you miss
here information that we should start the watchdog before registering
it? If so please explain why.

> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>  drivers/watchdog/s3c2410_wdt.c | 26 +++++++++++++++-----------
>  1 file changed, 15 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index ca082b1226e3..9af014ff1468 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -732,6 +732,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>  	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
>  	wdt->wdt_device.parent = dev;
>  
> +	/*
> +	 * If "tmr_atboot" param is non-zero, start the watchdog right now. Also
> +	 * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog.
> +	 *
> +	 * If we're not enabling the watchdog, then ensure it is disabled if it
> +	 * has been left running from the bootloader or other source.
> +	 */
> +	if (tmr_atboot && started == 0) {
> +		dev_info(dev, "starting watchdog timer\n");
> +		s3c2410wdt_start(&wdt->wdt_device);
> +		set_bit(WDOG_HW_RUNNING, &wdt->wdt_device.status);
> +	} else if (!tmr_atboot) {
> +		s3c2410wdt_stop(&wdt->wdt_device);
> +	}
> +
>  	ret = watchdog_register_device(&wdt->wdt_device);
>  	if (ret)
>  		goto err_cpufreq;
> @@ -740,17 +755,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		goto err_unregister;
>  
> -	if (tmr_atboot && started == 0) {
> -		dev_info(dev, "starting watchdog timer\n");
> -		s3c2410wdt_start(&wdt->wdt_device);
> -	} else if (!tmr_atboot) {
> -		/* if we're not enabling the watchdog, then ensure it is
> -		 * disabled if it has been left running from the bootloader
> -		 * or other source */
> -
> -		s3c2410wdt_stop(&wdt->wdt_device);
> -	}
> -
>  	platform_set_drvdata(pdev, wdt);
>  
>  	/* print out a statement of readiness */
> 


Best regards,
Krzysztof